Devicetree
 help / color / mirror / Atom feed
 messages from 2026-11-06 11:49:29 to 2026-11-06 15:35:54 UTC [more...]

[PATCH v3 0/8] clk: stm32mp25: add Cortex-M0 D3 clocks, ETR/STM and USB2PHY1 STP
 2026-11-06 15:35 UTC  (2+ messages)
` [PATCH v3 1/8] clk: stm32mp25: define the number of clocks in the driver

[PATCH v7 00/19] drm: starfive: jh7110: Enable display subsystem
 2026-11-06 15:35 UTC  (23+ messages)
  ` [PATCH v7 01/19] drm/bridge: inno-hdmi: fix swapped HSYNC and VSYNC polarity
  ` [PATCH v7 02/19] drm/bridge: inno-hdmi: Don't dereference a NULL drm_device on hotplug
  ` [PATCH v7 03/19] dt-bindings: display: bridge: Add starfive,jh7110-inno-hdmi-controller
  ` [PATCH v7 04/19] dt-bindings: display: starfive: Add starfive,jh7110-hdmi-subsystem
  ` [PATCH v7 05/19] dt-bindings: soc: starfive: Add starfive,jh7110-vout-syscon
  ` [PATCH v7 06/19] dt-bindings: display: verisilicon: Add starfive,jh7110-dc8200
  ` [PATCH v7 07/19] dt-bindings: display: starfive: Add starfive,jh7110-vout-subsystem
  ` [PATCH v7 08/19] drm/bridge: inno-hdmi: Split probe out of bind
  ` [PATCH v7 09/19] drm/bridge: inno-hdmi: Use a regmap for register access
  ` [PATCH v7 10/19] drm/bridge: inno-hdmi: Add .disable platform operation
  ` [PATCH v7 11/19] drm/bridge: inno-hdmi: Add .mode_valid "
  ` [PATCH v7 12/19] drm/bridge: inno-hdmi: Make the PHY configuration table optional
  ` [PATCH v7 13/19] drm/bridge: inno-hdmi: Make the register clock source selectable
  ` [PATCH v7 14/19] drm/bridge: inno-hdmi: Make the supported HDMI version selectable
  ` [PATCH v7 15/19] soc: starfive: Add jh7110-hdmi-subsystem driver
  ` [PATCH v7 16/19] soc: starfive: Add jh7110-vout-subsystem driver
  ` [PATCH v7 17/19] drm/bridge: starfive: Add JH7110 HDMI controller driver
  ` [PATCH v7 18/19] riscv: dts: starfive: jh7110: Update DT for display subsystem
  ` [PATCH v7 19/19] MAINTAINERS: Add StarFive JH7110 display subsystem entry

[PATCH v6 00/10] drm/tegra: Add support for Tegra20/Tegra30 8-bit CPU interface
 2026-11-06 15:34 UTC  (29+ messages)
` [PATCH v6 01/10] drm: Add MIPI DBI bus support for MIPI DBI Type A and B
` [PATCH v6 02/10] drm/panel: Convert Hitachi TX10D07VM0BAA to use MIPI DBI bus
` [PATCH v6 03/10] drm/panel: Convert LG LH400WV3-SD04 "
` [PATCH v6 04/10] drm/tegra: dc: Refactor and expand header
` [PATCH v6 05/10] dt-bindings: display: tegra: Document Tegra20 DSI port
` [PATCH v6 06/10] drm/tegra: Make panel parsing by tegra_output_probe() optional
` [PATCH v6 09/10] dt-bindings: display: tegra: Document 8-bit CPU parallel interface
` [PATCH v6 10/10] drm/tegra: Add support for 8-bit CPU interface

[PATCH 0/6] spi: qcom-geni: Add QSPI support over GPI DMA
 2026-11-06 15:32 UTC  (10+ messages)
` [PATCH 1/6] spi: spi-geni-qcom: Add transfer_one_message() support
` [PATCH 2/6] dt-bindings: dma: qcom-gpi: Add QSPI protocol identifier
` [PATCH 3/6] dt-bindings: spi: qcom,spi-geni-qcom: Document QSPI support
` [PATCH 4/6] soc: qcom: geni-se: Define the QSPI firmware protocol
` [PATCH 5/6] dmaengine: qcom: gpi: Add QSPI protocol support
` [PATCH 6/6] spi: spi-geni-qcom: Add QSPI support over GPI DMA

[PATCH v4 0/6] Add eDP support for RK3568
 2026-11-06 15:29 UTC  (5+ messages)
` [PATCH v4 2/6] dt-bindings: phy: Add rockchip,rk3568-edp-phy

[PATCH v14 0/8] Add initial support for Qualcomm SM7250 SoC
 2026-11-06 15:15 UTC  (9+ messages)
` [PATCH v14 1/8] dt-bindings: clock: Add SM7250 global clock controller
` [PATCH v14 2/8] clk: qcom: Add Global Clock Controller (GCC) driver for SM7250
` [PATCH v14 3/8] thermal/qcom/lmh: Switch to match data for SoC CPU-to-node mappings
` [PATCH v14 4/8] dt-bindings: thermal: lmh: Document SM7250 LMh
` [PATCH v14 5/8] thermal/qcom/lmh: Add support for Qualcomm SM7250
` [PATCH v14 6/8] dt-bindings: firmware: qcom,scm: Document SM7250 SCM
` [PATCH v14 7/8] dt-bindings: cpufreq: qcom-hw: Document SM7250 cpufreq hardware
` [PATCH v14 8/8] arm64: dts: qcom: Add SM7250 devicetree file

[PATCH v1 0/3] serial: Support driver-selected TTY wakeup defaults
 2026-11-06 15:16 UTC  (5+ messages)
` [PATCH v1 1/3] dt-bindings: serial: fsl-lpuart: Allow wakeup-source

[PATCH 0/2] regulator: fan53555: Add support for Silergy SYM827
 2026-11-06 15:13 UTC  (3+ messages)
` [PATCH 1/2] regulator: dt-bindings: fan53555: Add "
` [PATCH 2/2] regulator: fan53555: Add support for "

[PATCH v4 0/6] arm-mpam: Add basic device tree support for resctrl
 2026-11-06 15:08 UTC  (5+ messages)

[PATCH v3 0/5] drm/ingenic: Add the X1600 display controller and the HiBy R1 panel
 2026-11-06 15:06 UTC  (5+ messages)
` [PATCH v3 3/5] drm/ingenic: Add a driver for the X1600 display controller

[PATCH v2 0/7] BCMBCA PMB clock, reset and hardware monitoring support
 2026-11-06 14:51 UTC  (5+ messages)
` [PATCH v2 6/7] hwmon: Add Broadcom PMB PVTMON monitoring

[PATCH 0/3] nvmem: Add driver for i.MX BBNSM GP register
 2026-11-06 14:49 UTC  (4+ messages)
` [PATCH 2/3] "

[PATCH v4 0/3] Add RISC-V RPMI voltage service support
 2026-11-06 14:46 UTC  (3+ messages)
` [PATCH v4 2/3] regulator: Add RPMI voltage service

[PATCH v7 0/8] Add Qualcomm JPEG V4L2 encoder for SM8250 and SC7280
 2026-11-06 14:42 UTC  (4+ messages)
` [PATCH v7 1/8] dt-bindings: media: qcom: Add JPEG encoder binding

[PATCH v14 0/9] media: qcom: camss: CAMSS Offline Processing Engine support
 2026-11-06 14:42 UTC  (12+ messages)
` [PATCH v14 1/9] media: qcom: camss: Add V4L2 meta format for CAMSS ISP parameters
` [PATCH v14 2/9] dt-bindings: media: qcom: Add CAMSS Offline Processing Engine (OPE)
` [PATCH v14 3/9] dt-bindings: media: qcom,qcm2290-camss-ope: Document shikra compatible
` [PATCH v14 4/9] media: uapi: Add CAMSS ISP configuration definition
` [PATCH v14 5/9] media: Documentation: uapi: Add qcom-camss ISP params documentation
` [PATCH v14 6/9] media: qcom: camss: Add CAMSS Offline Processing Engine driver
` [PATCH v14 7/9] arm64: dts: qcom: agatti: Add OPE node
` [PATCH v14 8/9] arm64: dts: qcom: shikra: "
` [PATCH v14 9/9] arm64: defconfig: Enable Qualcomm CAMSS OPE driver

[PATCH 0/7] ARM: dts: arm: Another batch of warning fixes
 2026-11-06 14:40 UTC  (6+ messages)

[PATCH v16 0/7] Provide support for Trigger Generation Unit
 2026-11-06 14:37 UTC  (3+ messages)

[PATCH v4 0/4] mfd: max8907: Schema, pdata and poweroff
 2026-11-06 14:35 UTC  (3+ messages)
` [PATCH v4 1/4] regulator: dt-bindings: maxim,max8907: Convert to DT schema

[PATCH v5 0/4] dmaengine: zynqmp_dma: Add reset support for Versal Gen2 and Versal Net
 2026-11-06 14:28 UTC  (5+ messages)
` [PATCH v5 1/4] dt-bindings: dma: xlnx,zynqmp-dma: Require resets for Versal Gen2
` [PATCH v5 2/4] dt-bindings: dma: xlnx,zynqmp-dma: Add Versal Net compatible

[PATCH v7 0/5] phy: Add the StarFive JH7110 Innosilicon HDMI PHY
 2026-11-06 14:26 UTC  (8+ messages)
  ` [PATCH v7 1/5] dt-bindings: phy: Add starfive,jh7110-inno-hdmi-phy
  ` [PATCH v7 2/5] phy: Add common Innosilicon HDMI PHY helpers
  ` [PATCH v7 3/5] phy: rockchip: inno-hdmi: Use the common Innosilicon "
  ` [PATCH v7 4/5] phy: starfive: Add jh7110-inno-hdmi-phy driver
  ` [PATCH v7 5/5] MAINTAINERS: Add StarFive JH7110 HDMI PHY entry

[PATCH v5 0/3] ARM: bcm: Enable CFE SMP on BCMBCA
 2026-11-06 14:25 UTC  (3+ messages)
` [PATCH v5 1/3] dt-bindings: arm: cpus: Add brcm,bca-smp enable method

[PATCH] dt-bindings: reset: Remove orphan bt1-ccu.h
 2026-11-06 14:17 UTC  (3+ messages)

[PATCH net-next v4 0/8] net: dsa: Add support for SoC-e Ethernet switch IP cores
 2026-11-06 14:17 UTC  (9+ messages)
` [PATCH net-next v4 3/8] dt-bindings: net: dsa: Add SoC-e SWIP switch function
` [PATCH net-next v4 4/8] dt-bindings: mfd: Add SoC-e SWIP parent
` [PATCH net-next v4 5/8] net: dsa: Add tag handling for SoC-e switches
` [PATCH net-next v4 8/8] net: dsa: soce: Add VLAN membership table support

[PATCH 0/2] arm64: dts: imx8mp-phyboard-pollux: updates
 2026-11-06 14:12 UTC  (4+ messages)
` [PATCH 1/2] arm64: dts: imx8mp-phyboard-pollux: fix i2c3 gpios
` [PATCH 2/2] arm64: dts: imx8mp-phyboard-pollux: update gpio-line-names

[PATCH v6 0/5] regulator: add the Will Semiconductor WL2868C camera PMIC
 2026-11-06 14:10 UTC  (3+ messages)
` [PATCH v6 1/5] regulator: dt-bindings: willsemi,wl2868c: add the "

[PATCH v3 0/2] Add initial device tree support for the Xiaomi Mi Box 4 (MDZ-21-AA), an Amlogic S905L based TV box
 2026-11-06 14:04 UTC  (4+ messages)
` [PATCH v3 2/2] arm64: dts: amlogic: add Xiaomi Mi Box 4 support

[PATCH 0/4] drm/panel: ilitek-ili9488: add the PocketGo S30 panel
 2026-11-06 13:54 UTC  (4+ messages)
` [PATCH 1/4] dt-bindings: vendor-prefixes: add PocketGo

[PATCH v3 00/11] gpio: vf610: fix clocks and misc cleanup
 2026-11-06 13:29 UTC  (7+ messages)
` [PATCH v3 01/11] dt-bindings: gpio: vf610: fix clock requirements per SoC
` [PATCH v3 02/11] gpio: vf610: simplify with irq_set_irq_wake()
` [PATCH v3 03/11] gpio: vf610: use devm_clk_get_optional_enabled() for clock handling

[PATCH v8 0/6] of: teach overlay code to keep /aliases in sync
 2026-11-06 13:24 UTC  (4+ messages)

[PATCH] dt-bindings: arm: omap-l3-noc: Convert to DT schema
 2026-11-06 13:23 UTC  (3+ messages)

[PATCH v2 0/2] firmware: meson: sm: make power-off work on S4
 2026-11-06 13:09 UTC  (3+ messages)
` [PATCH v2 1/2] dt-bindings: firmware: amlogic,meson-gxbb-sm: add amlogic,meson-s4-sm

[PATCH v2 0/2] media: rc: meson-ir: wake the system from the remote
 2026-11-06 13:08 UTC  (3+ messages)
` [PATCH v2 1/2] dt-bindings: media: amlogic,meson6-ir: allow wakeup-source

[PATCH 0/5] clk: qcom: Add NSS clock controller support for IPQ5210 SoC
 2026-11-06 13:08 UTC  (7+ messages)
` [PATCH 2/5] clk: qcom: Add NSS clock controller driver "
` [PATCH 4/5] arm64: dts: qcom: Update IPQ5210 xo_board to use fixed factor clock
` [PATCH 5/5] arm64: dts: qcom: ipq5210: Add NSS clock controller node

[PATCH] dt-bindings: serial: 8250: Allow unconnected interrupts
 2026-11-06 13:04 UTC  (2+ messages)

[PATCH 0/2] gpio: realtek-otto: Add RTL9311B support
 2026-11-06 13:04 UTC  (3+ messages)
` [PATCH 2/2] "

[PATCH] dt-bindings: thermal: Use signed integers for coefficients
 2026-11-06 13:03 UTC  (2+ messages)

[PATCH 0/3] Add initial GPU support for CIX Sky1
 2026-11-06 13:02 UTC  (4+ messages)
` [PATCH 2/3] drm/panthor: Add initial "

[PATCH v6 0/9] ASoC: qcom: Add shikra and Hawi LPASS macro support
 2026-11-06 13:00 UTC  (14+ messages)
` [PATCH v6 v6 1/9] ASoC: dt-bindings: qcom: Add Shikra RX and VA macro codecs
` [PATCH v6 v6 2/9] ASoC: qcom: lpass-macro-common: Add missing v2.9 version string
` [PATCH v6 v6 3/9] ASoC: qcom: lpass-rx-macro: Add shikra compatible
` [PATCH v6 v6 4/9] ASoC: qcom: lpass-va-macro: "
` [PATCH v6 v6 5/9] ASoC: qcom: lpass-va-macro: Add SoundWire microphone support
` [PATCH v6 v6 6/9] ASoC: dt-bindings: qcom: Add Hawi LPASS macro codecs
` [PATCH v6 v6 7/9] ASoC: dt-bindings: qcom: Add Maili "
` [PATCH v6 v6 8/9] ASoC: qcom: lpass-tx-macro: Add support for Bolero v4.0
` [PATCH v6 v6 9/9] ASoC: qcom: lpass: Add support for LPASS codec v4.0

[PATCH] arm64: dts: imx93-11x11-frdm: add HDMI support
 2026-11-06 12:59 UTC 

[PATCH 0/2] Add rockchip-timer for RK356X
 2026-11-06 12:59 UTC  (3+ messages)
` [PATCH 1/2] dt-bindings: timer: rockchip: Add rk3568 compatible

[PATCH v3 0/7] BCMBCA PMB power, clock, reset and hardware monitoring support
 2026-11-06 12:57 UTC  (5+ messages)
` [PATCH v3 1/7] dt-bindings: mfd: Describe the BCM6846 PMC complex
` [PATCH v3 5/7] reset: Add BCMBCA block resets through the PMB

[PATCH 00/13] drivers/perf: apple_m1: Add M3/M4/A18 Pro Support
 2026-11-06 12:55 UTC  (3+ messages)
` [PATCH 01/13] dt-bindings: arm: pmu: Add Apple M3/M4/A18 Pro SoC CPU PMU compatibles

[PATCH 0/2] media: pwm-ir-tx: regulator support
 2026-11-06 12:54 UTC  (3+ messages)
` [PATCH 1/2] dt-bindings: leds: irled: pwm-ir-tx: add power supply support

[PATCH v2 0/2] usb: host: remove Xilinx XPS USB host controller
 2026-11-06 12:53 UTC  (3+ messages)
` [PATCH v2 2/2] dt-bindings: xilinx: Remove description for "

[PATCH v2 0/4] Enable DSP device for i.MX8ULP
 2026-11-06 12:52 UTC  (3+ messages)
` [PATCH v2 1/4] dt-bindings: dsp: fsl,dsp: document debug reset control

[PATCH v2 0/8] Update BSH SystemMaster device trees and add SMM-M2B support
 2026-11-06 12:51 UTC  (3+ messages)
` [PATCH v2 1/8] dt-bindings: arm: fsl: Add BSH SMM-M2B board

[PATCH v2 0/2] arm64: dts: qcom: sm8150: Add standalone ICE node for UFS
 2026-11-06 12:50 UTC  (3+ messages)
` [PATCH v2 1/2] dt-bindings: crypto: ice: Document sm8150 inline crypto engine

[PATCH v2 0/9] Initial Apple Silicon M5 device trees and dt-bindings
 2026-11-06 12:46 UTC  (3+ messages)
` [PATCH v2 6/9] dt-bindings: pinctrl: apple,pinctrl: Add t8142 compatible

[PATCH v2] dt-bindings: arm: vexpress-config: Drop ineffective label limits
 2026-11-06 12:45 UTC  (2+ messages)

[PATCH v10 0/3] Add support for the Sony IMX681 camera sensor
 2026-11-06 12:45 UTC  (4+ messages)
` [PATCH v10 1/3] dt-bindings: media: Add Sony IMX681
` [PATCH v10 2/3] media: i2c: Add Sony IMX681 sensor driver
` [PATCH v10 3/3] media: ipu-bridge: Add Sony IMX681

[PATCH v2 0/5] lx2160a: change the pad muxes through the RCW override
 2026-11-06 12:43 UTC  (3+ messages)
` [PATCH v2 2/5] dt-bindings: soc: fsl: layerscape-dcfg: add the LX2160A pad-mux child

[PATCH v3 0/4] mmc: sdhci-cadence: SD6HC DDR50/DDR52 read-path tuning and fixes
 2026-11-06 12:40 UTC  (3+ messages)
` [PATCH v3 3/4] dt-bindings: mmc: cdns,sd6hc: add SD6HC DDR50 read-path tuning

[PATCH] arm64: dts: qcom: sm8150-microsoft-surface-duo: fix da7280 pinctrl state name
 2026-11-06 12:29 UTC  (2+ messages)

[PATCH v6 00/15] Support 10-bit YUV422 and 8/10-bit YUV420 color format on DW HDMI QP
 2026-11-06 12:28 UTC  (3+ messages)
` (subset) "

[PATCH v5 0/3] Add TI LM51772 buck-boost voltage regulator
 2026-11-06 12:22 UTC  (4+ messages)
` [PATCH v5 3/3] regulator: Add TI LM51772 support

[PATCH 0/3] Add read-only SpacemiT K3 eFuse support
 2026-11-06 12:15 UTC  (3+ messages)
` [PATCH 2/3] nvmem: "

[PATCH v2 0/5] media: qcom: camss: Add SM8150 CAMSS support
 2026-11-06 12:15 UTC  (5+ messages)
` [PATCH v2 1/5] dt-bindings: i2c: qcom-cci: Document SM8150 compatible
` [PATCH v2 2/5] dt-bindings: media: qcom,sm8150-camss: Add SM8150 CAMSS

[PATCH v11 0/5] clk: add support for Airoha AN7583 clock
 2026-11-06 12:13 UTC  (9+ messages)
` [PATCH v11 1/5] dt-bindings: clock: airoha: Document support for "
` [PATCH v11 2/5] clk: en7523: use devm variant for clk_hw_register and fixed clock
` [PATCH v11 3/5] clk: en7523: protect concurrent access to reset and PCI register
` [PATCH v11 4/5] clk: en7523: generalize register clocks function
` [PATCH v11 5/5] clk: en7523: add support for Airoha AN7583 clock

[PATCH net-next 0/5] net: ethernet: adi: adin1110: Add OPEN Alliance TC6 support
 2026-11-06 12:12 UTC  (5+ messages)
` [PATCH net-next 4/5] net: ethernet: adi: adin1110: Add OA TC6 protocol support for ADIN1110

[PATCH v2 2/5] dt-bindings: display: Add the Ingenic X1600 LCD controller
 2026-11-06 12:07 UTC  (4+ messages)

[PATCH v3 0/4] phy: qcom-mipi-csi2: Add D-PHY support for sa8775p, qcs8300 and sc7280
 2026-11-06 12:07 UTC  (3+ messages)
` [PATCH v3 1/4] dt-bindings: phy: qcom: Add common qcom,csi2-phy

[PATCH 0/3] arm64: tegra: Fix missing regulator for Jetson AGX Thor
 2026-11-06 12:03 UTC  (4+ messages)
` [PATCH 1/3] arm64: tegra: Add regulator for Jetson AGX Thor thermal sensor
` [PATCH 2/3] arm64: tegra: Add regulator for Jetson AGX Thor system EEPROM
` [PATCH 3/3] arm64: tegra: Add regulator for Jetson AGX Thor module EEPROM

[PATCH v10 0/5] clk: add support for Airoha AN7583 clock
 2026-11-06 11:56 UTC  (4+ messages)
` [PATCH v10 5/5] clk: en7523: "

[PATCH 00/25] riscv: add support for the Metanoia MT2824 SoC and MT5824 EVB
 2026-11-06 11:54 UTC  (12+ messages)
` [PATCH 01/25] dt-bindings: vendor-prefixes: add Metanoia Communications
` [PATCH 11/25] dt-bindings: spi: andestech,ae350-spi: make DMA and interrupts optional
` [PATCH 13/25] dt-bindings: usb: dwc2: add Metanoia MT2824
` [PATCH 23/25] usb: dwc2: add support for "

[PATCH v3 5/6] arm64: dts: rockchip: fix USB OTG power on Photonicat in battery mode
 2026-11-06 11:50 UTC  (2+ messages)

[PATCH v7 0/3] usb: dwc3: two Type-C connectors sharing one HS data bus
 2026-11-06 11:49 UTC  (3+ messages)
` [PATCH 1/3] dt-bindings: usb: snps,dwc3: describe two connectors sharing one HS bus


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox