Devicetree
 help / color / mirror / Atom feed
 messages from 2026-11-12 10:32:59 to 2026-11-12 11:41:00 UTC [more...]

[PATCH v4 0/6] media: iris: add support for kaanapali platform
 2026-11-12 11:40 UTC  (3+ messages)
` [PATCH v4 4/6] media: iris: add platform data for kaanapali

[PATCH v2 0/3] usb: dwc3: qcom: Keep USB 2.0 working in DisplayPort-only modes
 2026-11-12 11:40 UTC  (9+ messages)
` [PATCH v2 2/3] usb: dwc3: qcom: Use the UTMI clock as PIPE clock "
` [PATCH v2 3/3] arm64: dts: qcom: kaanapali: Mark the USB controller as a Type-C mode switch

[PATCH v3] arm64: dts: qcom: kaanapali: Add mode-switch to the USB controller
 2026-11-12 11:39 UTC 

[PATCH v3 0/2] usb: dwc3: qcom: Keep USB 2.0 working in DisplayPort-only modes
 2026-11-12 11:38 UTC  (3+ messages)
` [PATCH v3 1/2] dt-bindings: usb: qcom,snps-dwc3: Add mode-switch
` [PATCH v3 2/2] usb: dwc3: qcom: Use the UTMI clock as PIPE clock in DisplayPort-only modes

[PATCH v3 0/5] Enable DSP device for i.MX8ULP
 2026-11-12 11:36 UTC  (11+ messages)
` [PATCH v3 1/5] dt-bindings: dsp: fsl,dsp: document debug reset control
` [PATCH v3 2/5] dt-bindings: dsp: fsl,dsp: require resets for i.MX8ULP
` [PATCH v3 3/5] remoteproc: imx_dsp_rproc: use reset controller "
` [PATCH v3 4/5] arm64: dts: imx8ulp: add HiFi4 DSP node
` [PATCH v3 5/5] arm64: dts: imx8ulp-evk: Enable HiFi4 DSP

[PATCH 0/2] Input: wacom_w9000 - add support for Wacom WEZ01
 2026-11-12 11:21 UTC  (3+ messages)
` [PATCH 1/2] dt-bindings: input: touchscreen: wacom,w9007a-lt03: Add "

[PATCH 0/4] phy: apple: atc: Add M3 support
 2026-11-12 11:20 UTC  (3+ messages)
` [PATCH 1/4] dt-bindings: phy: atcphy: Add M3 series

[PATCH v5 0/3] Add UFS support for Glymur Qualcomm SoC
 2026-11-12 11:20 UTC  (2+ messages)
` (subset) "

[PATCH v10 0/3] Add ASPEED PCIe PHY support
 2026-11-12 11:20 UTC  (2+ messages)

[PATCH v18 0/2] phy: qcom: add the SGMII SerDes PHY for firmware-managed systems
 2026-11-12 11:20 UTC  (2+ messages)

[PATCH 0/2] power: supply: Add Silicon Mitus SM5714 fuel gauge
 2026-11-12 11:19 UTC  (3+ messages)
` [PATCH 1/2] dt-bindings: "

[PATCH 0/5] Input: s6sy761 - add support for ST FTS1BA90A
 2026-11-12 11:17 UTC  (3+ messages)
` [PATCH 3/5] dt-bindings: input: samsung,s6sy761: Add "

[PATCH 0/2] soc: qcom: Add the SXR2250P SoC ID
 2026-11-12 11:16 UTC  (3+ messages)
` [PATCH 1/2] dt-bindings: arm: qcom,ids: Add SoC ID for SXR2250P

[PATCH] dt-bindings: display: panel: samsung,s6e63m0: Describe ESD interrupt
 2026-11-12 11:15 UTC  (2+ messages)

[PATCH v2 0/6] drm/msm/dpu: Add SM7250 display support
 2026-11-12 11:13 UTC  (5+ messages)
` [PATCH v2 3/6] dt-bindings: display/msm: dp-controller: Add SM7250
` [PATCH v2 4/6] dt-bindings: display/msm: Add SM7250 MDSS

[PATCH v2 0/3] media: i2c: Add Samsung S5K3L6 and Librem 5 rear camera
 2026-11-12 11:10 UTC  (3+ messages)
` [PATCH v2 1/3] dt-bindings: media: i2c: Add Samsung S5K3L6 image sensor

[PATCH v2 0/3] Add support for Variscite VAR-SMARC-MX8M-PLUS and Echo board
 2026-11-12 11:09 UTC  (3+ messages)
` [PATCH v2 1/3] dt-bindings: arm: fsl: Add Variscite VAR-SMARC-MX8M Plus

[PATCH v3 0/8] arm64: Unmap FF-A lent memory from direct map
 2026-11-12 11:08 UTC  (5+ messages)
` [PATCH v3 5/8] dma-mapping: Introduce lendable-dma-pool
` [PATCH v3 8/8] optee: Add support for lendable-dma-pool

[PATCH v2 0/2] ARM: dts: zynq: Add ALINX AX7Z020B development board
 2026-11-12 11:08 UTC  (5+ messages)
` [PATCH v2 1/2] dt-bindings: soc: xilinx: Add ALINX AX7Z020B board
` [PATCH v2 2/2] ARM: dts: zynq: Add ALINX AX7Z020B development board

[PATCH 0/2] Add Exynos5515 USB PHY support
 2026-11-12 11:08 UTC  (3+ messages)
` [PATCH 2/2] phy: exynos5-usbdrd: Add support for the Exynos5515 usbdrd phy

[PATCH v14 0/9] media: qcom: camss: CAMSS Offline Processing Engine support
 2026-11-12 11:05 UTC  (3+ messages)
` [PATCH v14 4/9] media: uapi: Add CAMSS ISP configuration definition

[PATCH v2 0/2] backlight: lm3630a: Add a per-bank full-scale current limit
 2026-11-12 11:05 UTC  (3+ messages)
` [PATCH v2 1/2] dt-bindings: backlight: lm3630a: Add led-max-microamp

[PATCH v2 0/4] arm64: dts: qcom: Add Samsung Galaxy M52 5G
 2026-11-12 11:05 UTC  (7+ messages)
` [PATCH v2 1/4] dt-bindings: arm: "
` [PATCH v2 2/4] dt-bindings: net: nfc: samsung,s3fwrn5: Add pvdd-supply
` [PATCH v2 3/4] nfc: s3fwrn5: i2c: Enable the pvdd supply

[PATCH v2 0/2] Add Samsung Galaxy Tab S7 FE LTE (gts7xllite)
 2026-11-12 10:58 UTC  (3+ messages)
` [PATCH v2 1/2] dt-bindings: arm: qcom: Add Samsung Galaxy Tab S7 FE LTE

[PATCH v2] dt-bindings: phy: qcom: Relax required supplies
 2026-11-12 10:57 UTC  (2+ messages)

[PATCH v2 0/3] clk: qcom: Add NSS clock controller support for IPQ5210 SoC
 2026-11-12 10:57 UTC  (3+ messages)
` [PATCH v2 1/3] dt-bindings: clock: qcom: Add NSS clock controller "

[PATCH v2 0/2] Add support for Samsung Galaxy Tab A 10.1 (2019, 4G)
 2026-11-12 10:54 UTC  (2+ messages)

[PATCH v2 0/3] Supporting LTC4284 which is a negative voltage hotswap controller
 2026-11-12 10:51 UTC  (3+ messages)
` [PATCH v2 1/3] dt-bindings: hwmon: ltc4283: add ltc4284

[PATCH v3 0/7] clk: add a driver for the ath79 PLL controller
 2026-11-12 10:48 UTC  (5+ messages)
` [PATCH v3 4/7] dt-bindings: clock: ath79: drop ATH79_CLK_END
` [PATCH v3 5/7] dt-bindings: clock: ath79: add the UART1 and PCIe PLL clocks

[PATCH v2 0/6] PCI: qcom-ep: Add PCIe Endpoint support for Monaco
 2026-11-12 10:47 UTC  (3+ messages)
` [PATCH v2 1/6] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Add qcs8300 16 GT/s PHY

[PATCH v3 0/5] arm64: dts: freescale: Add support for bytesatwork byteDEVKIT i.MX93
 2026-11-12 10:41 UTC  (5+ messages)
` [PATCH v3 1/5] dt-bindings: display: panel: ilitek,ili9806e: Add Youritech et050fw01-kt
` [PATCH v3 4/5] dt-bindings: arm: fsl: Add byteENGINE i.MX93 platforms

[PATCH v3 0/2] usb: typec: add CIX Type-C PD controller driver
 2026-11-12 10:37 UTC  (3+ messages)
` [PATCH v3 1/2] dt-bindings: usb: add Realtek RTS5453H Type-C port controller

[PATCH v4 0/3] arm64: dts: qcom: sm8150: Add standalone ICE node for UFS
 2026-11-12 10:35 UTC  (5+ messages)
` [PATCH v4 2/3] dt-bindings: ufs: qcom: classify sm8150-ufshc as standalone ICE
` [PATCH v4 3/3] arm64: dts: qcom: sm8150: use standalone ICE for UFS

[PATCH net-next v4 0/8] net: dsa: Add support for SoC-e Ethernet switch IP cores
 2026-11-12 10:33 UTC  (3+ messages)
` [PATCH net-next v4 3/8] dt-bindings: net: dsa: Add SoC-e SWIP switch function

[PATCH v7 0/8] arm64: dts: monaco-arduino-monza: Add support for LGA WiFi/BT module
 2026-11-12 10:32 UTC  (6+ messages)
` [PATCH v7 5/8] Bluetooth: hci_qca: Support QCA2066 on M.2 connector via pwrseq


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox