devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jason Hui <jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Cc: grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
	linaro-dev-cunTk1MwBs8s++Sfvej+rw@public.gmane.org,
	patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Subject: Re: [PATCH V4 5/5] net/fec: add device tree matching support
Date: Wed, 16 Mar 2011 11:36:56 +0800	[thread overview]
Message-ID: <AANLkTingmW29g1SCpXPUDLXGDnHeAgx_ZL1np5ffJnuF@mail.gmail.com> (raw)
In-Reply-To: <20110315071404.GE23050-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>

Hi, Grant,

On Tue, Mar 15, 2011 at 3:14 PM, Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org> wrote:
> On Thu, Mar 10, 2011 at 12:59:45PM +0800, Jason Liu wrote:
>> Signed-off-by: Jason Liu <jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>> Signed-off-by: Jason Liu <r64343-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
>> ---
>>  drivers/net/fec.c |   13 +++++++++++++
>>  1 files changed, 13 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/net/fec.c b/drivers/net/fec.c
>> index 02cdd71..fcb9768 100644
>> --- a/drivers/net/fec.c
>> +++ b/drivers/net/fec.c
>> @@ -45,6 +45,9 @@
>>  #include <linux/phy.h>
>>  #include <linux/fec.h>
>>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +
>
> Should be mixed in with the rest of the linux/*.h includes (don't put
> a blank line between them.

OK,

>
>>  #include <asm/cacheflush.h>
>>
>>  #ifndef CONFIG_ARM
>> @@ -1523,6 +1526,13 @@ static const struct dev_pm_ops fec_pm_ops = {
>>  };
>>  #endif
>>
>> +#ifdef CONFIG_OF
>> +static struct of_device_id fec_matches[] = {
>> +     { .compatible = "fsl,imx-fec" },
>
> Must have documentation for this binding in
> Documentation/devicetree/bindings before I can pick this up.  Same
> goes for the uart driver patch.

OK, I will write one documentation for it and the same with uart.

>
> Also, I recommend being more specific on the compatible property.
> fsl,imx51-fec would be better.  Newer parts can claim compatibility
> with this one if you're concerned about supporting multiple parts.
>
> ie. for imx 53, this would be appropriate:
>
>        compatible = "fsl,imx53-fec", "fsl,imx51-fec";

OK,

>
>> +     {},
>> +};
>> +#endif
>> +
>>  static struct platform_driver fec_driver = {
>>       .driver = {
>>               .name   = DRIVER_NAME,
>> @@ -1530,6 +1540,9 @@ static struct platform_driver fec_driver = {
>>  #ifdef CONFIG_PM
>>               .pm     = &fec_pm_ops,
>>  #endif
>> +#ifdef CONFIG_OF
>> +             .of_match_table = fec_matches,
>> +#endif
>>       },
>>       .id_table = fec_devtype,
>>       .probe  = fec_probe,
>> --
>> 1.7.1
>>
>>
>> _______________________________________________
>> linaro-dev mailing list
>> linaro-dev-cunTk1MwBs8s++Sfvej+rw@public.gmane.org
>> http://lists.linaro.org/mailman/listinfo/linaro-dev
>

      parent reply	other threads:[~2011-03-16  3:36 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-03-10  4:59 [PATCH V4 0/5] Add MX51 basic DT support Jason Liu
     [not found] ` <1299733185-2172-1-git-send-email-jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-03-10  4:59   ` [PATCH V4 1/5] arm/dt: add basic mx51 device tree support Jason Liu
     [not found]     ` <1299733185-2172-2-git-send-email-jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-03-15  7:03       ` Grant Likely
     [not found]         ` <20110315070342.GB23050-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2011-03-16  3:34           ` Jason Hui
2011-03-16  5:03             ` Grant Likely
     [not found]               ` <AANLkTimE7iWuCf8BMVMjNYxxosnrzSbRg7P1mULAe=5W-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-03-16  8:45                 ` Paul E. McKenney
2011-03-17  1:54           ` Shawn Guo
     [not found]             ` <20110317015435.GF11658-+NayF8gZjK2ctlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2011-03-17 17:17               ` Grant Likely
2011-03-10  4:59   ` [PATCH V4 2/5] arm/dt: add very basic dts file for babbage board Jason Liu
     [not found]     ` <1299733185-2172-3-git-send-email-jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-03-11  6:56       ` Shawn Guo
     [not found]         ` <20110311065655.GA2827-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2011-03-11  7:33           ` Jason Hui
     [not found]             ` <AANLkTinRtj1WpAgyPzD2+eHeESMVLZL=ziQvAfZDXb87-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-03-11  8:36               ` Shawn Guo
     [not found]                 ` <20110311083502.GB2827-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2011-03-11  9:10                   ` Jason Hui
2011-03-10  4:59   ` [PATCH V4 3/5] serial/imx: parse from device tree support Jason Liu
     [not found]     ` <1299733185-2172-4-git-send-email-jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-03-15  7:07       ` Grant Likely
     [not found]         ` <20110315070709.GC23050-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2011-03-16  3:35           ` Jason Hui
2011-03-10  4:59   ` [PATCH V4 4/5] net/fec: check id_entry pointer before using it Jason Liu
     [not found]     ` <1299733185-2172-5-git-send-email-jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-03-15  7:09       ` Grant Likely
2011-03-10  4:59   ` [PATCH V4 5/5] net/fec: add device tree matching support Jason Liu
     [not found]     ` <1299733185-2172-6-git-send-email-jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-03-15  7:14       ` Grant Likely
     [not found]         ` <20110315071404.GE23050-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2011-03-16  3:36           ` Jason Hui [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=AANLkTingmW29g1SCpXPUDLXGDnHeAgx_ZL1np5ffJnuF@mail.gmail.com \
    --to=jason.hui-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
    --cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
    --cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
    --cc=linaro-dev-cunTk1MwBs8s++Sfvej+rw@public.gmane.org \
    --cc=patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).