Re: [PATCH v2] ARM: CSR: Adding CSR SiRFprimaII board support

[Barry Song <21cnbao@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 8924 bytes --]

2011/6/30 Arnd Bergmann <arnd@arndb.de>:
> On Thursday 30 June 2011, Barry Song wrote:
>
>> > Is this really just one bus with a huge address space, or rather some
>> > nested buses? I'd prefer to have the device tree representation as
>> > close as possible to the actual layout.
>>
>> there are two AXI buses in prima2. AXI-1 connect to memory, AXI-2 is
>> transferred to CSR self-defined IOBUS by CPUIF, then 1 intterupt
>> controller and 9 IO bridges are connected to the IOBUS .
>> The 9 IO bridges are SYSIOBG, PERIIOBG,CPURTCIOBG, UUSIOBG, GRAPHIOBG,
>> MEDIAIOBG, DSPIOBG, DISPIOBG, MEMIOBG. Every iobrg connect to a group
>> of controllers.
>> For example, DISPIOBG connect to VPP and LCD, SYSIOBG connect to CLKC,
>> RSTC, RSC and CPHIFBG, DSPIOBG connect to DSPIF, GPS and DSP.
>> PERIIOBG connect to TIMER, NAND, AUDIO, UART0, UART1, UART2, USP0,
>> USP1, USP2, SPI0, I2C0, I2C1, GPIO, *SYS2PCI* and so on. Then
>> *SYS2PCI* connect to SD.
>>
>> The indendation descible the device hierarchy
>> AXI-1
>>          Memory
>> AXI-2
>>          interrupt controller
>>          IOBG...
>>                   xxxx
>>          IOBG...
>>                   xxxx
>>          IOBG...
>>                   xxxx
>>          IOBG...
>>                   xxxx
>>          IOBG...
>>                   xxxx
>>          IOBG...
>>                   SYS2PCI
>>                             SD
>>
>> i have get the IC guy Weizeng involved, maybe he can explain better than me :-)
>
> I think it would be good to represent the IOBG devices in the device tree then.
> You don't need to represent AXI-1 because memory is special anyway, and I would
> not bother to list SYS2PCI if the intention of that block was to hide the fact
> that it's PCI behind it. Properly instantiating it as a PCI bridge would be
> a lot of work that is probably not worth it.
>
> My usual plea to hardware developers: Please make the registers
> autodiscoverable from software! On an AMBA bus, please use the PrimeCell
> register layout. If you always have an IOBG device behind, they should
> all have the same identifier for that kind of bus bridge.
>
> For the IOBG, it would be ideal to have a similar way of finding and
> configuring the connected hardware, including:
>
> * unique identifier for each distinct IP block
> * revision of that block
> * MMIO ranges and sizes, relative to the bus
> * interrupt numbers, relative to a local interrupt controller
> * location identifier (like PCI bus/device/fn number) that can be
>  referred to by other devices
> * clock management for that device
> * power management for that device
>
> If your IODB infrastructure already has this, you should create a new
> bus-type for this in Linux, which will let you detect all devices
> in a consistent manner without having to list them in the device tree.
>
>> > I think the namespace for the compatible values is supposed to start with
>> > the stock ticker name of the company making the device as a unique
>> > identifier. This means you'd have to use
>> > "csrxf,sirf-intc", "csrxf,sirf-prima2-intc" as the value, instead
>> > of starting with the product name. I don't know exactly how strictly
>> > we apply that rule, but I've taken the devicetree-discuss@lists.ozlabs.org
>> > mailing list on Cc, maybe someone can clarify.
>>
>> in fact, SiRF is a company name. it was merged into CSR 4 years ago.
>> Due to history reason, now the SoC names are still headed by sirf.
>> the logo in SiRFprimaII chip is CSR.
>> So the "SiRF" of SiRFprimaII should mean two things: old company name,
>>  heritable CPU production-line. Anyway, "csr, sirf-intc" seems to make
>> more senses than "sirf, intc".
>>
>> could we change "csrxf,sirf-intc", "csrxf,sirf-prima2-intc" to
>> "csr,sirf-intc", "csr,sirf-prima2-intc"?
>
> Not sure how strict we interpret the rules about stock ticker symbols.
> 'CSR' on wallstreet is 'China Security & Surveillance Tech. Inc'. If they
> ever decide to produce embedded Linux machines, we'd get a conflict, unless
> they also use "csst" (their .com domain name) as a prefix.

Hi Arnd,

ha-ha.

except Wall St and stock, i really didn't realize CSR is something
related with 'China Security & Surveillance Tech. Inc' . it seems CSR
is much more extensively known as a company in Wireless Technology,
Audio, Connectivity and GPS.
if we lost this name, people might not know it came from *that* CSR
focusing on Wireless/Audio/Connectivity/GPS. people will ask, what is
CSRXF? if we really use stock sticker symbols, CSR.L is the more
normal symbol in UK market. if we move to stock sticker symbol, could
we use CSR.L?

if 'China Security & Surveillance Tech. Inc' begin to move to Linux,
it seems CSST make more senses to them than CSR too :-)  as we check
the attached logo of 'China Security & Surveillance Tech. Inc' , CSST
is the abbreviation of the name of this China Company.

-barry

>
>> > better put these in a list with one file per line, like
>> >
>> > obj-y   += timer.o
>> > obj-y   += irq.o
>> >
>> > That makes the list more consistent when you add conditional files.
>>
>> Then it could be:
>> obj-y += timer.o
>> obj-y += irq.o
>> obj-y += clock.o
>> obj-y += common.o
>> obj-$(CONFIG_CACHE_L2X0) := l2x0.o
>
>
> Right. Note that you have a := in there, which needs to be +=.
>
>
>> > It probably makes sense to pick a new name for the combined file, too, but I
>> > can't think of a good one. Maybe one of platform.c, prima2.c or core.c.
>>
>> i am not sure the original purpose of board_dt.c. and i am guessing
>> whether Grant created that single board file to contain multiple
>> boards. For example:
>>
>> MACHINE_START(PRIMA2_XXX, "prima2xxx")
>>        .boot_params    = SIRFSOC_SDRAM_PA + 0x100,
>>        .init_early     = sirfsoc_init_clk,
>>        .map_io         = sirfsoc_map_io,
>>        .init_irq       = sirfsoc_of_init_irq,
>>        .timer          = &sirfsoc_timer,
>>        .init_machine   = sirfsoc_mach_init,
>>        .dt_compat      = prima2xxx_dt_match,
>> MACHINE_END
>>
>> MACHINE_START(PRIMA2_YYY, "prima2yyy")
>>        .boot_params    = SIRFSOC_SDRAM_PA + 0x100,
>>        .init_early     = sirfsoc_init_clk,
>>        .map_io         = sirfsoc_map_io,
>>        .init_irq       = sirfsoc_of_init_irq,
>>        .timer          = &sirfsoc_timer,
>>        .init_machine   = sirfsoc_mach_init,
>>        .dt_compat      = prima2yyy_dt_match,
>> MACHINE_END
>
> No, this wouldn't make any sense when the only difference is the dt_compat
> field: At that point you would just list all the possible boards in the
> global dt_match table.
>
>> after creating a new file named mach-prima2/l2x0.c,  it seems we only
>> need to change Makefile to:
>> obj-$(CONFIG_CACHE_L2X0) := l2x0.o
>> the head file is not needed.
>>
>> Currently, rob's OF-based L2 cache is not merged yet. then i only
>> write the following:
>>
>> static int __init sirfsoc_of_l2x_init(void)
>> {
>>         struct device_node *np;
>>         void __iomem *sirfsoc_l2x_base;
>>
>>         np = of_find_matching_node(NULL, l2x_ids);
>>         if (!np)
>>                 panic("unable to find compatible intc node in dtb\n");
>>
>>         sirfsoc_l2x_base = of_iomap(np, 0);
>>         if (!sirfsoc_l2x_base)
>>                 panic("unable to map l2x cpu registers\n");
>>
>>         of_node_put(np);
>>
>>         if (!(readl_relaxed(sirfsoc_l2x_base + L2X0_CTRL) & 1)) {
>>                 /*
>>                  * set the physical memory windows L2 cache will cover
>>                  */
>>                 writel_relaxed(PLAT_PHYS_OFFSET + 1024 * 1024 * 1024,
>>                         sirfsoc_l2x_base + L2X0_ADDR_FILTERING_END);
>>                 writel_relaxed(PLAT_PHYS_OFFSET | 0x1,
>>                         sirfsoc_l2x_base + L2X0_ADDR_FILTERING_START);
>>
>>                 writel_relaxed(0,
>>                         sirfsoc_l2x_base + L2X0_TAG_LATENCY_CTRL);
>>                 writel_relaxed(0,
>>                         sirfsoc_l2x_base + L2X0_DATA_LATENCY_CTRL);
>>         }
>>         l2x0_init((void __iomem *)sirfsoc_l2x_base, 0x00040000,
>>                 0x00000000);
>>
>>         return 0;
>> }
>> early_initcall(sirfsoc_of_l2x_init);
>>
>> After Rob's patch is merged, i think sirfsoc_of_l2x_init can be much simpler.
>>
> Yes. Rob/Olof, what's the status of that patch?
>
>        Arnd

[-- Attachment #2: CSST.PNG --]
[-- Type: image/png, Size: 32704 bytes --]

[-- Attachment #3: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel