From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
To: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
Rob Herring <robh+dt@kernel.org>,
Magnus Damm <magnus.damm@gmail.com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Linux-Renesas <linux-renesas-soc@vger.kernel.org>,
Biju Das <biju.das.jz@bp.renesas.com>
Subject: Re: [PATCH v2 1/3] dt-bindings: power: renesas,rzg2l-sysc: Add DT binding documentation for SYSC controller
Date: Thu, 10 Jun 2021 15:30:27 +0100 [thread overview]
Message-ID: <CA+V-a8sOOs4FK5UpoqMwXTMbuVQJRG4oZvmycGzmQajjs_a=Bg@mail.gmail.com> (raw)
In-Reply-To: <CAMuHMdVL-6dykmxb9PozWap3iTJEwuNQBgvvJwxHNGEu=r2WOg@mail.gmail.com>
Hi Geert,
Thank you for the review.
On Thu, Jun 10, 2021 at 1:22 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>
> Hi Prabhakar,
>
> On Wed, Jun 9, 2021 at 6:37 PM Lad Prabhakar
> <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> > Add DT binding documentation for SYSC controller found on
> > RZ/G2{L,LC,UL} SoC's.
> >
> > SYSC block contains the LSI_DEVID register which is used to retrieve
> > SoC product information.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> Thanks for the update!
>
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml
> > @@ -0,0 +1,63 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/power/renesas,rzg2l-sysc.yaml#"
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > +
> > +title: Renesas RZ/G2L System Controller (SYSC)
> > +
> > +maintainers:
> > + - Geert Uytterhoeven <geert+renesas@glider.be>
> > +
> > +description:
> > + The RZ/G2L System Controller (SYSC) performs system control of the LSI and
> > + supports following functions,
> > + - External terminal state capture function
> > + - 34-bit address space access function
> > + - Low power consumption control
> > + - WDT stop control
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - renesas,r9a07g044-sysc # RZ/G2{L,LC}
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + items:
> > + - description: CA55/CM33 Sleep/Software Standby Mode request interrupt
> > + - description: CA55 Software Standby Mode release request interrupt
> > + - description: CM33 Software Standby Mode release request interrupt
> > + - description: CA55 ACE Asynchronous Bridge Master/Slave interface deny request interrupt
> > +
> > + interrupt-names:
> > + items:
> > + - const: sys_lpm_int
> > + - const: sys_ca55stbydone_int
> > + - const: sys_cm33stbyr_int
> > + - const: sys_ca55_deny
>
> The "sys_" prefixes feel superfluous to me.
> If you don't mind, I can remove them while applying (also from example
> and .dtsi).
>
Fine with me, thank you for taking care of that.
Cheers,
Prabhakar
next prev parent reply other threads:[~2021-06-10 14:30 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-09 16:37 [PATCH v2 0/3] SoC identification support for RZ/G2L Lad Prabhakar
2021-06-09 16:37 ` [PATCH v2 1/3] dt-bindings: power: renesas,rzg2l-sysc: Add DT binding documentation for SYSC controller Lad Prabhakar
2021-06-10 12:22 ` Geert Uytterhoeven
2021-06-10 14:30 ` Lad, Prabhakar [this message]
2021-06-09 16:37 ` [PATCH v2 2/3] soc: renesas: Add support to read LSI DEVID register of RZ/G2{L,LC} SoC's Lad Prabhakar
2021-06-10 12:26 ` Geert Uytterhoeven
2021-06-09 16:37 ` [PATCH v2 3/3] arm64: dts: renesas: r9a07g044: Add SYSC node to RZ/G2L SoC DTSI Lad Prabhakar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CA+V-a8sOOs4FK5UpoqMwXTMbuVQJRG4oZvmycGzmQajjs_a=Bg@mail.gmail.com' \
--to=prabhakar.csengg@gmail.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=geert@linux-m68k.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).