Re: [RFC PATCH v2 2/4] media: dt-bindings: media: Document RZ/G2L CRU

["Lad, Prabhakar" <prabhakar.csengg@gmail.com>]

Hi Jacopo,

Thank you for the review.

On Tue, Feb 15, 2022 at 1:05 PM Jacopo Mondi <jacopo@jmondi.org> wrote:
>
> Hi Prabhakar,
>
> On Fri, Jan 21, 2022 at 01:05:41AM +0000, Lad Prabhakar wrote:
> > Document the CRU block found on Renesas RZ/G2L SoC's.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> > v1->v2
> > * Dropped CSI
> > ---
> >  .../bindings/media/renesas,rzg2l-cru.yaml     | 152 ++++++++++++++++++
> >  1 file changed, 152 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> > new file mode 100644
> > index 000000000000..a03fc6ef0117
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> > @@ -0,0 +1,152 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +# Copyright (C) 2022 Renesas Electronics Corp.
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Renesas RZ/G2L Camera Data Receiving Unit (CRU)
> > +
> > +maintainers:
> > +  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > +
> > +description:
> > +  The RZ/G2L Camera Data Receiving Unit (CRU) device provides video input
> > +  capabilities for the Renesas RZ/G2L family of devices.
> > +
> > +  Depending on the instance the Image Processing input is connected to
> > +  external SoC pins or to a CSI-2 receiver.
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
> > +      - items:
> > +          - enum:
> > +              - renesas,r9a07g044-cru     # RZ/G2{L,LC}
> > +          - const: renesas,rzg2l-cru
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 3
> > +
> > +  interrupt-names:
> > +    items:
> > +      - const: image_conv
> > +      - const: image_conv_err
> > +      - const: axi_mst_err
> > +
> > +  clocks:
> > +    items:
> > +      - description: CRU Main clock
> > +      - description: CPU Register access clock
> > +      - description: CRU image transfer clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: vclk
> > +      - const: pclk
> > +      - const: aclk
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  resets:
> > +    items:
> > +      - description: CRU_PRESETN reset terminal
> > +      - description: CRU_ARESETN reset terminal
> > +
> > +  reset-names:
> > +    items:
> > +      - const: presetn
> > +      - const: aresetn
> > +
> > +  ports:
> > +    $ref: /schemas/graph.yaml#/properties/ports
> > +
> > +    properties:
> > +      port@0:
> > +        $ref: /schemas/graph.yaml#/$defs/port-base
> > +        unevaluatedProperties: false
> > +        description:
> > +          Input port node, single endpoint describing a parallel input source.
> > +
> > +        properties:
> > +          endpoint:
> > +            $ref: video-interfaces.yaml#
> > +            unevaluatedProperties: false
> > +
> > +            properties:
> > +              hsync-active: true
> > +              vsync-active: true
> > +              bus-width: true
> > +              data-shift: true
> > +
> > +      port@1:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description:
> > +          Output port node, describing the RZ/G2L Image Processing module
> > +          connected the CSI-2 receiver
>
> Isn't this the port dedicated to the CSI-2 receiver input ?
>
Agreed.

> > +
> > +        properties:
> > +          endpoint@0:
> > +            $ref: /schemas/graph.yaml#/properties/endpoint
> > +            description: Endpoint connected to CSI2.
>
> And the andpoint should describe the connection between the CRU and
> the CSI-2 receiver ? (ie it should not contain CSI-2 specific
> properties, as those are specified by the CSI-2 receiver device node?)
>
Ok will drop the properties.

Cheers,
Prabhakar

> Thanks
>   j
> > +
> > +        anyOf:
> > +          - required:
> > +              - endpoint@0
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - interrupt-names
> > +  - clocks
> > +  - clock-names
> > +  - resets
> > +  - reset-names
> > +  - power-domains
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  # Device node example with CSI-2
> > +  - |
> > +    #include <dt-bindings/clock/r9a07g044-cpg.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +    cru: video@10830000 {
> > +            compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru";
> > +            reg = <0x10830000 0x400>;
> > +            interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> > +            interrupt-names = "image_conv", "image_conv_err", "axi_mst_err";
> > +            clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
> > +                     <&cpg CPG_MOD R9A07G044_CRU_PCLK>,
> > +                     <&cpg CPG_MOD R9A07G044_CRU_ACLK>;
> > +            clock-names = "vclk", "pclk", "aclk";
> > +            power-domains = <&cpg>;
> > +            resets = <&cpg R9A07G044_CRU_PRESETN>,
> > +                     <&cpg R9A07G044_CRU_ARESETN>;
> > +            reset-names = "presetn", "aresetn";
> > +
> > +            ports {
> > +                    #address-cells = <1>;
> > +                    #size-cells = <0>;
> > +
> > +                    port@1 {
> > +                            #address-cells = <1>;
> > +                            #size-cells = <0>;
> > +
> > +                            reg = <1>;
> > +
> > +                            crucsi2: endpoint@0 {
> > +                                    reg = <0>;
> > +                                    remote-endpoint= <&csi2cru>;
> > +                            };
> > +                    };
> > +            };
> > +    };
> > --
> > 2.17.1
> >