From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
To: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Gleixner <tglx@linutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Magnus Damm <magnus.damm@gmail.com>,
linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
Biju Das <biju.das.jz@bp.renesas.com>,
Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: Re: [PATCH 2/5] irqchip/renesas-rzg2l: Add support for RZ/Five SoC
Date: Wed, 31 Jan 2024 18:36:20 +0000 [thread overview]
Message-ID: <CA+V-a8spFYvOo2=9CwM-1EyMA3Xrc_rggUgxDZwZan2ou4SG1A@mail.gmail.com> (raw)
In-Reply-To: <CAMuHMdV7Q4kMv1pFVNBf5oYF=_W_snp=5GKLpr9+OxeqxywhBw@mail.gmail.com>
Hi Geert,
Thank you for the review.
On Tue, Jan 30, 2024 at 11:38 AM Geert Uytterhoeven
<geert@linux-m68k.org> wrote:
>
> Hi Prabhakar,
>
> On Mon, Jan 29, 2024 at 4:16 PM Prabhakar <prabhakar.csengg@gmail.com> wrote:
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> >
> > The IX45 block has additional mask registers (NMSK/IMSK/TMSK) as compared
> > to the RZ/G2L (family) SoC.
> >
> > Introduce masking/unmasking support for IRQ and TINT interrupts in IRQC
> > controller driver. Two new registers, IMSK and TMSK, are defined to
> > handle masking on RZ/Five SoC. The implementation utilizes a new data
> > structure, `struct rzg2l_irqc_data`, to determine mask support for a
> > specific controller instance.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> Thanks for your patch!
>
> > --- a/drivers/irqchip/irq-renesas-rzg2l.c
> > +++ b/drivers/irqchip/irq-renesas-rzg2l.c
> > @@ -66,15 +68,25 @@ struct rzg2l_irqc_reg_cache {
> > u32 titsr[2];
> > };
> >
> > +/**
> > + * struct rzg2l_irqc_data - OF data structure
> > + * @mask_supported: Indicates if mask registers are available
> > + */
> > +struct rzg2l_irqc_data {
>
> This structure has the same name as the single static struct
> rzg2l_irqc_priv instance, which is confusing.
>
Agreed, I will rename it to rzg2l_irqc_of_data
> > + bool mask_supported;
> > +};
> > +
> > /**
> > * struct rzg2l_irqc_priv - IRQ controller private data structure
> > * @base: Controller's base address
> > + * @data: OF data pointer
> > * @fwspec: IRQ firmware specific data
> > * @lock: Lock to serialize access to hardware registers
> > * @cache: Registers cache for suspend/resume
> > */
> > static struct rzg2l_irqc_priv {
> > void __iomem *base;
> > + const struct rzg2l_irqc_data *data;
>
> Replacing this by a bool would avoid a pointer dereference in each user,
> and allows you to make rzg2l_irqc_data etc. __initconst.
>
Do you mean just add "bool mask_supported" here and get rid of struct
rzg2l_irqc_data ? Can you please elaborate here..
> > struct irq_fwspec fwspec[IRQC_NUM_IRQ];
> > raw_spinlock_t lock;
> > struct rzg2l_irqc_reg_cache cache;
>
> > @@ -371,9 +475,23 @@ static int rzg2l_irqc_parse_interrupts(struct rzg2l_irqc_priv *priv,
> > return 0;
> > }
> >
> > +static const struct rzg2l_irqc_data rzfive_irqc_data = {
> > + .mask_supported = true,
> > +};
> > +
> > +static const struct rzg2l_irqc_data rzg2l_irqc_default_data = {
> > + .mask_supported = false,
> > +};
> > +
> > +static const struct of_device_id rzg2l_irqc_matches[] = {
> > + { .compatible = "renesas,r9a07g043f-irqc", .data = &rzfive_irqc_data },
> > + { }
> > +};
> > +
> > static int rzg2l_irqc_init(struct device_node *node, struct device_node *parent)
> > {
> > struct irq_domain *irq_domain, *parent_domain;
> > + const struct of_device_id *match;
> > struct platform_device *pdev;
> > struct reset_control *resetn;
> > int ret;
> > @@ -392,6 +510,12 @@ static int rzg2l_irqc_init(struct device_node *node, struct device_node *parent)
> > if (!rzg2l_irqc_data)
> > return -ENOMEM;
> >
> > + match = of_match_node(rzg2l_irqc_matches, node);
> > + if (match)
> > + rzg2l_irqc_data->data = match->data;
> > + else
> > + rzg2l_irqc_data->data = &rzg2l_irqc_default_data;
>
> Instead of matching a second time, I'd rather add a second
> IRQCHIP_MATCH() entry with a different init function, passing the
> actual rzg2l_irqc_data pointer.
>
OK, or rather just pass true/false instead of rzg2l_irqc_of_data pointer.?
Cheers,
Prabhakar
next prev parent reply other threads:[~2024-01-31 18:36 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-29 15:16 [PATCH 0/5] Add IAX45 support for RZ/Five SoC Prabhakar
2024-01-29 15:16 ` [PATCH 1/5] dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document " Prabhakar
2024-01-29 17:30 ` Conor Dooley
2024-01-30 11:13 ` Geert Uytterhoeven
2024-01-30 12:59 ` Lad, Prabhakar
2024-01-30 13:05 ` Geert Uytterhoeven
2024-01-30 16:00 ` Lad, Prabhakar
2024-02-02 9:22 ` Lad, Prabhakar
2024-01-29 15:16 ` [PATCH 2/5] irqchip/renesas-rzg2l: Add support for " Prabhakar
2024-01-30 11:38 ` Geert Uytterhoeven
2024-01-31 18:36 ` Lad, Prabhakar [this message]
2024-02-01 8:34 ` Geert Uytterhoeven
2024-02-01 13:05 ` Lad, Prabhakar
2024-01-29 15:16 ` [PATCH 3/5] riscv: dts: renesas: r9a07g043f: Add IRQC node to RZ/Five SoC DTSI Prabhakar
2024-01-30 11:25 ` Geert Uytterhoeven
2024-02-01 13:09 ` Lad, Prabhakar
2024-01-29 15:16 ` [PATCH 4/5] arm64: dts: renesas: r9a07g043: Move interrupt-parent property to common DTSI Prabhakar
2024-01-30 11:28 ` Geert Uytterhoeven
2024-01-29 15:16 ` [PATCH 5/5] riscv: dts: renesas: rzfive-smarc-som: Drop deleting interrupt properties from ETH0/1 nodes Prabhakar
2024-01-30 11:30 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CA+V-a8spFYvOo2=9CwM-1EyMA3Xrc_rggUgxDZwZan2ou4SG1A@mail.gmail.com' \
--to=prabhakar.csengg@gmail.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=claudiu.beznea.uj@bp.renesas.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert@linux-m68k.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=magnus.damm@gmail.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).