From: Shengjiu Wang <shengjiu.wang@gmail.com>
To: Marco Felsch <m.felsch@pengutronix.de>
Cc: Shengjiu Wang <shengjiu.wang@nxp.com>,
p.zabel@pengutronix.de, abelvesa@kernel.org, peng.fan@nxp.com,
mturquette@baylibre.com, sboyd@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, shawnguo@kernel.org,
s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, marex@denx.de, linux-clk@vger.kernel.org,
imx@lists.linux.dev, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v6 2/5] clk: imx: clk-audiomix: Add reset controller
Date: Tue, 11 Jun 2024 10:34:50 +0800 [thread overview]
Message-ID: <CAA+D8AP++bNzE4cccKP_NaxDK-MWN3jtkcB_P5jj0tNiZYYFSg@mail.gmail.com> (raw)
In-Reply-To: <20240530085115.ttmzx4dve4x6nep2@pengutronix.de>
On Thu, May 30, 2024 at 4:51 PM Marco Felsch <m.felsch@pengutronix.de> wrote:
>
> On 24-05-30, Shengjiu Wang wrote:
> > Audiomix block control can be a reset controller for
> > Enhanced Audio Return Channel (EARC), which is one of
> > modules in this audiomix subsystem.
> >
> > The reset controller is supported by the auxiliary device
> > framework.
> >
> > Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> > Reviewed-by: Frank Li <Frank.Li@nxp.com>
> > ---
> > drivers/clk/imx/Kconfig | 1 +
> > drivers/clk/imx/clk-imx8mp-audiomix.c | 60 +++++++++++++++++++++++++++
> > 2 files changed, 61 insertions(+)
> >
> > diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig
> > index 6da0fba68225..9edfb030bea9 100644
> > --- a/drivers/clk/imx/Kconfig
> > +++ b/drivers/clk/imx/Kconfig
> > @@ -81,6 +81,7 @@ config CLK_IMX8MP
> > tristate "IMX8MP CCM Clock Driver"
> > depends on ARCH_MXC || COMPILE_TEST
> > select MXC_CLK
> > + select AUXILIARY_BUS
> > help
> > Build the driver for i.MX8MP CCM Clock Driver
> >
> > diff --git a/drivers/clk/imx/clk-imx8mp-audiomix.c b/drivers/clk/imx/clk-imx8mp-audiomix.c
> > index b381d6f784c8..a3dc2f3606ee 100644
> > --- a/drivers/clk/imx/clk-imx8mp-audiomix.c
> > +++ b/drivers/clk/imx/clk-imx8mp-audiomix.c
> > @@ -5,6 +5,7 @@
> > * Copyright (C) 2022 Marek Vasut <marex@denx.de>
> > */
> >
> > +#include <linux/auxiliary_bus.h>
> > #include <linux/clk-provider.h>
> > #include <linux/device.h>
> > #include <linux/io.h>
> > @@ -13,6 +14,7 @@
> > #include <linux/of.h>
> > #include <linux/platform_device.h>
> > #include <linux/pm_runtime.h>
> > +#include <linux/slab.h>
> >
> > #include <dt-bindings/clock/imx8mp-clock.h>
> >
> > @@ -217,6 +219,60 @@ struct clk_imx8mp_audiomix_priv {
> > struct clk_hw_onecell_data clk_data;
> > };
> >
> > +#if IS_ENABLED(CONFIG_RESET_CONTROLLER)
> > +
> > +static void clk_imx8mp_audiomix_reset_unregister_adev(void *_adev)
> > +{
> > + struct auxiliary_device *adev = _adev;
> > +
> > + auxiliary_device_delete(adev);
> > + auxiliary_device_uninit(adev);
> > +}
> > +
> > +static void clk_imx8mp_audiomix_reset_adev_release(struct device *dev)
> > +{
> > + struct auxiliary_device *adev = to_auxiliary_dev(dev);
> > +
> > + kfree(adev);
> > +}
> > +
> > +static int clk_imx8mp_audiomix_reset_controller_register(struct device *dev,
> > + struct clk_imx8mp_audiomix_priv *priv)
> > +{
> > + struct auxiliary_device *adev __free(kfree) = NULL;
> > + int ret;
>
> Since the reset-controller is optional you need to check the existence
> of the '#reset-cells' property before you register it.
>
ok, will add it.
best regards
Shengjiu Wang
> Regards,
> Marco
>
> > +
> > + adev = kzalloc(sizeof(*adev), GFP_KERNEL);
> > + if (!adev)
> > + return -ENOMEM;
> > +
> > + adev->name = "reset";
> > + adev->dev.parent = dev;
> > + adev->dev.release = clk_imx8mp_audiomix_reset_adev_release;
> > +
> > + ret = auxiliary_device_init(adev);
> > + if (ret)
> > + return ret;
> > +
> > + ret = auxiliary_device_add(adev);
> > + if (ret) {
> > + auxiliary_device_uninit(adev);
> > + return ret;
> > + }
> > +
> > + return devm_add_action_or_reset(dev, clk_imx8mp_audiomix_reset_unregister_adev,
> > + no_free_ptr(adev));
> > +}
> > +
> > +#else /* !CONFIG_RESET_CONTROLLER */
> > +
> > +static int clk_imx8mp_audiomix_reset_controller_register(struct clk_imx8mp_audiomix_priv *priv)
> > +{
> > + return 0;
> > +}
> > +
> > +#endif /* !CONFIG_RESET_CONTROLLER */
> > +
> > static void clk_imx8mp_audiomix_save_restore(struct device *dev, bool save)
> > {
> > struct clk_imx8mp_audiomix_priv *priv = dev_get_drvdata(dev);
> > @@ -337,6 +393,10 @@ static int clk_imx8mp_audiomix_probe(struct platform_device *pdev)
> > if (ret)
> > goto err_clk_register;
> >
> > + ret = clk_imx8mp_audiomix_reset_controller_register(dev, priv);
> > + if (ret)
> > + goto err_clk_register;
> > +
> > pm_runtime_put_sync(dev);
> > return 0;
> >
> > --
> > 2.34.1
> >
> >
> >
next prev parent reply other threads:[~2024-06-11 2:35 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-30 2:31 [PATCH v6 0/5] clk: imx: clk-audiomix: Improvement for audiomix Shengjiu Wang
2024-05-30 2:31 ` [PATCH v6 1/5] dt-bindings: clock: imx8mp: Add #reset-cells property Shengjiu Wang
2024-05-30 2:31 ` [PATCH v6 2/5] clk: imx: clk-audiomix: Add reset controller Shengjiu Wang
2024-05-30 8:51 ` Marco Felsch
2024-06-11 2:34 ` Shengjiu Wang [this message]
2024-05-30 2:31 ` [PATCH v6 3/5] reset: imx-aux: Add i.MX auxiliary reset driver Shengjiu Wang
2024-05-30 9:05 ` Marco Felsch
2024-05-30 15:53 ` Frank Li
2024-05-30 16:45 ` Marco Felsch
2024-05-30 18:33 ` Frank Li
2024-06-11 6:55 ` Shengjiu Wang
2024-06-04 3:57 ` Shengjiu Wang
2024-05-30 2:31 ` [PATCH v6 4/5] clk: imx: clk-audiomix: Add CLK_SET_RATE_PARENT flags for clocks Shengjiu Wang
2024-05-30 2:31 ` [PATCH v6 5/5] clk: imx: clk-audiomix: Correct parent clock for earc_phy and audpll Shengjiu Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAA+D8AP++bNzE4cccKP_NaxDK-MWN3jtkcB_P5jj0tNiZYYFSg@mail.gmail.com \
--to=shengjiu.wang@gmail.com \
--cc=abelvesa@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=m.felsch@pengutronix.de \
--cc=marex@denx.de \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=peng.fan@nxp.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
--cc=shengjiu.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).