Re: [PATCH v3 0/5] Add support to LIS2DW12 accel sensor

[Lorenzo Bianconi <lorenzo.bianconi83-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

> On Sun, 1 Oct 2017 15:15:26 +0200
> Lorenzo Bianconi <lorenzo.bianconi83-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>
>> > On Wed, 30 Aug 2017 13:50:38 +0200
>> > Lorenzo Bianconi <lorenzo.bianconi83-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>> >
>> >> Modify management of drdy line and status register in order to support
>> >> LIS2DW12 device
>> >>
>> >> Changes since v2:
>> >> - swap status register patch (3rd in v2) with irq{1,2} definition one
>> >>   (1st in v2)
>> >> - patchset rebased onto 'fix drdy line configuration for LIS3MDL' patch
>> >> Changes since v1:
>> >> - remove drdy_irq parameter from LPS001WP settings since the sensor
>> >> does not support data-ready interrupts
>> >>
>> >> Lorenzo Bianconi (5):
>> >>   iio: st_sensors: add register mask for status register
>> >>   iio: st_sensors: decouple irq1 configuration parameters from the irq2
>> >>     ones
>> >>   iio: st_sensors: do not always write enable_axis register
>> >>   iio: accel: add support to LIS2DW12
>> >>   dt-bindings: iio: accel: add LIS2DW12 sensor device binding
>> >>
>> >>  .../devicetree/bindings/iio/st-sensors.txt         |   1 +
>> >>  drivers/iio/accel/st_accel.h                       |   2 +
>> >>  drivers/iio/accel/st_accel_core.c                  | 180 +++++++++++++++++----
>> >>  drivers/iio/accel/st_accel_i2c.c                   |   5 +
>> >>  drivers/iio/accel/st_accel_spi.c                   |   5 +
>> >>  drivers/iio/common/st_sensors/st_sensors_core.c    |  35 ++--
>> >>  drivers/iio/common/st_sensors/st_sensors_trigger.c |  16 +-
>> >>  drivers/iio/gyro/st_gyro_core.c                    |  33 ++--
>> >>  drivers/iio/magnetometer/st_magn_core.c            |  16 +-
>> >>  drivers/iio/pressure/st_pressure_core.c            |  46 ++++--
>> >>  include/linux/iio/common/st_sensors.h              |  23 ++-
>> >>  11 files changed, 270 insertions(+), 92 deletions(-)
>> >>
>> >
>> > I'm happy with the whole series, however it doesn't currently apply
>> > due to various fixes working their way through the fixes branches
>> > of the iio git tree.  I'll try to pick it up once those have unwound.
>> > There is too much going on with this code at the moment to do this
>> > cleanly now.
>> >
>> > Give me a bump if I look like I have forgotten it once it will
>> > apply cleanly to the togreg branch of iio.git.
>> >
>> > If I was being really fussy  this should have had a dependency list
>> > for everything it was dependant on that wasn't currently in mainline.
>> >
>> > Jonathan
>>
>> Hi Jonathan,
>>
>> what about that patchset?
>> Regards,
>>
>> Lorenzo
>>
>
> I think I'm still waiting for the fixes to get back round via mainline
> to our upstream tree...   Will check again later this week.
>
> Jonathan

Fine, thanks. A couple of series queued waiting for that one :)

Regards,
Lorenzo


-- 
UNIX is Sexy: who | grep -i blonde | talk; cd ~; wine; talk; touch;
unzip; touch; strip; gasp; finger; gasp; mount; fsck; more; yes; gasp;
umount; make clean; sleep