Re: [PATCH 3/3] ARM: dts: qcom: pma8084: add pon node

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

On Tue, 23 Jul 2024 at 14:39, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>
> On 23.07.2024 1:35 PM, Dmitry Baryshkov wrote:
> > On Mon, Jul 22, 2024 at 12:47:57PM GMT, Rayyan Ansari wrote:
> >> Wrap existing pwrkey node inside a pon node, to conform to dt schema.
> >>
> >> Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
> >> ---
> >>  arch/arm/boot/dts/qcom/pma8084.dtsi | 14 +++++++++-----
> >>  1 file changed, 9 insertions(+), 5 deletions(-)
> >>
> >> diff --git a/arch/arm/boot/dts/qcom/pma8084.dtsi b/arch/arm/boot/dts/qcom/pma8084.dtsi
> >> index 2985f4805b93..dbf7afcbfd8b 100644
> >> --- a/arch/arm/boot/dts/qcom/pma8084.dtsi
> >> +++ b/arch/arm/boot/dts/qcom/pma8084.dtsi
> >> @@ -19,12 +19,16 @@ rtc@6000 {
> >>                      interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
> >>              };
> >>
> >> -            pwrkey@800 {
> >> -                    compatible = "qcom,pm8941-pwrkey";
> >> +            pon@800 {
> >> +                    compatible = "qcom,pm8941-pon";
> >>                      reg = <0x800>;
> >> -                    interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
> >> -                    debounce = <15625>;
> >> -                    bias-pull-up;
> >> +
> >> +                    pwrkey {
> >> +                            compatible = "qcom,pm8941-pwrkey";
> >> +                            interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
> >> +                            debounce = <15625>;
> >> +                            bias-pull-up;
> >> +                    };
> >
> > It might be worth adding the resin node too, see pm8941.dtsi
>
> This is a cleanup series, adding features is another thing and it
> would be nice if somebody could test it

Agreed.


-- 
With best wishes
Dmitry