From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Komal Bajaj <quic_kbajaj@quicinc.com>
Cc: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, quic_nainmeht@quicinc.com
Subject: Re: [RFC PATCH 2/2] arm64: dts: qcom: qcm6490: Add qcm6490 idp and rb3 board
Date: Sat, 4 Nov 2023 00:22:12 +0200 [thread overview]
Message-ID: <CAA8EJprNyu0r_mV9hbKA1fSvoEvTHuk5umxU8H64Voj_cnZcFQ@mail.gmail.com> (raw)
In-Reply-To: <20231103184655.23555-3-quic_kbajaj@quicinc.com>
On Fri, 3 Nov 2023 at 20:49, Komal Bajaj <quic_kbajaj@quicinc.com> wrote:
>
> Add qcm6490 devicetree file for QCM6490 IDP and QCM6490 RB3
> platform. QCM6490 is derived from SC7280 meant for various
> form factor including IoT.
>
> Supported features are, as of now:
> * Debug UART
> * eMMC (only in IDP)
> * USB
>
> Co-developed-by: Naina Mehta <quic_nainmeht@quicinc.com>
> Signed-off-by: Naina Mehta <quic_nainmeht@quicinc.com>
> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 2 +
> arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 33 ++
> .../boot/dts/qcom/qcm6490-iot-common.dtsi | 291 ++++++++++++++++++
> arch/arm64/boot/dts/qcom/qcm6490-rb3.dts | 26 ++
> 4 files changed, 352 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> create mode 100644 arch/arm64/boot/dts/qcom/qcm6490-iot-common.dtsi
> create mode 100644 arch/arm64/boot/dts/qcom/qcm6490-rb3.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 73c3be0f8872..29cd77000970 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -82,6 +82,8 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcm6490-fairphone-fp5.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += qcm6490-rb3.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb
> diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> new file mode 100644
> index 000000000000..b1d1b8f40bdb
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> @@ -0,0 +1,33 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "qcm6490-iot-common.dtsi"
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. QCM6490 IDP";
> + compatible = "qcom,qcm6490-idp", "qcom,qcm6490";
> +
> + aliases {
> + serial0 = &uart5;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&sdhc_1 {
> + non-removable;
> + no-sd;
> + no-sdio;
> +
> + vmmc-supply = <&vreg_l7b_2p952>;
> + vqmmc-supply = <&vreg_l19b_1p8>;
> +
> + status = "okay";
> +};
> +
> diff --git a/arch/arm64/boot/dts/qcom/qcm6490-iot-common.dtsi b/arch/arm64/boot/dts/qcom/qcm6490-iot-common.dtsi
> new file mode 100644
> index 000000000000..01adc97789d0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qcm6490-iot-common.dtsi
I have mixed feelings towards this file. Usually we add such 'common'
files only for the phone platforms where most of the devices are
common.
Do you expect that IDP and RB3 will have a lot of common code other
than these regulator settings?
> @@ -0,0 +1,291 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include "sc7280.dtsi"
> +#include "pm7325.dtsi"
> +#include "pm8350c.dtsi"
> +#include "pmk8350.dtsi"
> +
> +&apps_rsc {
> + regulators-0 {
> + compatible = "qcom,pm7325-rpmh-regulators";
> + qcom,pmic-id = "b";
> +
> + vreg_s1b_1p872: smps1 {
> + regulator-min-microvolt = <1840000>;
> + regulator-max-microvolt = <2040000>;
> + };
> +
> + vreg_s2b_0p876: smps2 {
> + regulator-min-microvolt = <570070>;
> + regulator-max-microvolt = <1050000>;
> + };
> +
> + vreg_s7b_0p972: smps7 {
> + regulator-min-microvolt = <535000>;
> + regulator-max-microvolt = <1120000>;
> + };
> +
> + vreg_s8b_1p272: smps8 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
> + };
> +
> + vreg_l1b_0p912: ldo1 {
> + regulator-min-microvolt = <825000>;
> + regulator-max-microvolt = <925000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2b_3p072: ldo2 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3b_0p504: ldo3 {
> + regulator-min-microvolt = <312000>;
> + regulator-max-microvolt = <910000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l4b_0p752: ldo4 {
> + regulator-min-microvolt = <752000>;
> + regulator-max-microvolt = <820000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + reg_l5b_0p752: ldo5 {
> + regulator-min-microvolt = <552000>;
> + regulator-max-microvolt = <832000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l6b_1p2: ldo6 {
> + regulator-min-microvolt = <1140000>;
> + regulator-max-microvolt = <1260000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l7b_2p952: ldo7 {
> + regulator-min-microvolt = <2400000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l8b_0p904: ldo8 {
> + regulator-min-microvolt = <870000>;
> + regulator-max-microvolt = <970000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l9b_1p2: ldo9 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l11b_1p504: ldo11 {
> + regulator-min-microvolt = <1504000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l12b_0p751: ldo12 {
> + regulator-min-microvolt = <751000>;
> + regulator-max-microvolt = <824000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l13b_0p53: ldo13 {
> + regulator-min-microvolt = <530000>;
> + regulator-max-microvolt = <824000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l14b_1p08: ldo14 {
> + regulator-min-microvolt = <1080000>;
> + regulator-max-microvolt = <1304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l15b_0p765: ldo15 {
> + regulator-min-microvolt = <765000>;
> + regulator-max-microvolt = <1020000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l16b_1p1: ldo16 {
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l17b_1p7: ldo17 {
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <1900000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l18b_1p8: ldo18 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l19b_1p8: ldo19 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-1 {
> + compatible = "qcom,pm8350c-rpmh-regulators";
> + qcom,pmic-id = "c";
> +
> + vreg_s1c_2p19: smps1 {
> + regulator-min-microvolt = <2190000>;
> + regulator-max-microvolt = <2210000>;
> + };
> +
> + vreg_s2c_0p752: smps2 {
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <800000>;
> + };
> +
> + vreg_s5c_0p752: smps5 {
> + regulator-min-microvolt = <465000>;
> + regulator-max-microvolt = <1050000>;
> + };
> +
> + vreg_s7c_0p752: smps7 {
> + regulator-min-microvolt = <465000>;
> + regulator-max-microvolt = <800000>;
> + };
> +
> + vreg_s9c_1p084: smps9 {
> + regulator-min-microvolt = <1010000>;
> + regulator-max-microvolt = <1170000>;
> + };
> +
> + vreg_l1c_1p8: ldo1 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1980000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2c_1p62: ldo2 {
> + regulator-min-microvolt = <1620000>;
> + regulator-max-microvolt = <1980000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3c_2p8: ldo3 {
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <3540000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l4c_1p62: ldo4 {
> + regulator-min-microvolt = <1620000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l5c_1p62: ldo5 {
> + regulator-min-microvolt = <1620000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l6c_2p96: ldo6 {
> + regulator-min-microvolt = <1650000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l7c_3p0: ldo7 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l8c_1p62: ldo8 {
> + regulator-min-microvolt = <1620000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l9c_2p96: ldo9 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <35440000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l10c_0p88: ldo10 {
> + regulator-min-microvolt = <720000>;
> + regulator-max-microvolt = <1050000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l11c_2p8: ldo11 {
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l12c_1p65: ldo12 {
> + regulator-min-microvolt = <1650000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l13c_2p7: ldo13 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_bob_3p296: bob {
> + regulator-min-microvolt = <3008000>;
> + regulator-max-microvolt = <3960000>;
> + };
> + };
> +};
> +
> +&qupv3_id_0 {
> + status = "okay";
> +};
> +
> +&uart5 {
> + compatible = "qcom,geni-debug-uart";
Maybe we should add qcm6490.dtsi, which has this compat string (and
other possible differences between sc7280 and qcm6490).
> + status = "okay";
> +};
> +
> +&usb_1 {
> + status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> + dr_mode = "peripheral";
> +};
> +
> +&usb_1_hsphy {
> + vdda-pll-supply = <&vreg_l10c_0p88>;
> + vdda33-supply = <&vreg_l2b_3p072>;
> + vdda18-supply = <&vreg_l1c_1p8>;
> +
> + status = "okay";
> +};
> +
> +&usb_1_qmpphy {
> + vdda-phy-supply = <&vreg_l6b_1p2>;
> + vdda-pll-supply = <&vreg_l1b_0p912>;
> +
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/qcm6490-rb3.dts b/arch/arm64/boot/dts/qcom/qcm6490-rb3.dts
> new file mode 100644
> index 000000000000..5b4c2826ac5c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qcm6490-rb3.dts
> @@ -0,0 +1,26 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +/* PM7250B is configured to use SID8/9 */
> +#define PM7250B_SID 8
> +#define PM7250B_SID1 9
> +
> +#include "qcm6490-iot-common.dtsi"
> +#include "pm7250b.dtsi"
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. QCM6490 RB3";
Is this a marketing name of the platform?
> + compatible = "qcom,qcm6490-rb3", "qcom,qcm6490";
chassis-type = ?
> +
> + aliases {
> + serial0 = &uart5;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> --
> 2.42.0
>
--
With best wishes
Dmitry
next prev parent reply other threads:[~2023-11-03 22:22 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-03 18:46 [RFC PATCH 0/2] Add support for qcm6490 idp and rb3 board Komal Bajaj
2023-11-03 18:46 ` [RFC PATCH 1/2] dt-bindings: arm: qcom: Add QCM6490 IDP and RB3 board Komal Bajaj
2023-11-05 13:06 ` Krzysztof Kozlowski
2023-11-03 18:46 ` [RFC PATCH 2/2] arm64: dts: qcom: qcm6490: Add qcm6490 idp and rb3 board Komal Bajaj
2023-11-03 22:22 ` Dmitry Baryshkov [this message]
2023-11-05 13:08 ` Krzysztof Kozlowski
2023-11-06 11:41 ` Mukesh Ojha
2023-11-06 11:54 ` Dmitry Baryshkov
2023-11-06 14:45 ` Mukesh Ojha
2023-11-06 22:32 ` Dmitry Baryshkov
2023-11-07 8:10 ` Mukesh Ojha
2023-11-13 15:51 ` Luca Weiss
2023-11-14 12:48 ` Mukesh Ojha
2023-11-14 12:53 ` Dmitry Baryshkov
2023-11-06 13:05 ` Krzysztof Kozlowski
2023-11-06 14:51 ` Mukesh Ojha
[not found] ` <4d8c094f-07b0-2b38-4680-145eb2d7c4f5@quicinc.com>
2023-11-17 9:33 ` Dmitry Baryshkov
2023-11-17 12:43 ` Komal Bajaj
2023-11-04 12:32 ` Konrad Dybcio
2023-11-17 12:49 ` Komal Bajaj
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAA8EJprNyu0r_mV9hbKA1fSvoEvTHuk5umxU8H64Voj_cnZcFQ@mail.gmail.com \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=quic_kbajaj@quicinc.com \
--cc=quic_nainmeht@quicinc.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).