From: Tomeu Vizoso <tomeu.vizoso@collabora.com>
To: "Clément Péron" <peron.clem@gmail.com>
Cc: linux-kernel <linux-kernel@vger.kernel.org>,
Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
"moderated list:ARM/Allwinner sunXi SoC support"
<linux-arm-kernel@lists.infradead.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>
Subject: Re: [PATCH] arm64: dts: allwinner: Add GPU operating points for H6
Date: Wed, 29 May 2019 17:42:12 +0200 [thread overview]
Message-ID: <CAAObsKCWJmx-TKyiHFvUaDtGOpz8SXNOBFK3AbmUWW7KprD2Rw@mail.gmail.com> (raw)
In-Reply-To: <CAJiuCccFG1SATp7QuSOi11MmbjmgX0ZHsTv=4zuXqXMG+=-7Dw@mail.gmail.com>
On Wed, 29 May 2019 at 17:37, Clément Péron <peron.clem@gmail.com> wrote:
>
> Hi Tomeu,
>
> On Wed, 29 May 2019 at 17:33, Tomeu Vizoso <tomeu.vizoso@collabora.com> wrote:
> >
> > The GPU driver needs them to change the clock frequency and regulator
> > voltage depending on the load.
>
> As requested by Maxime, I have dropped these OPP table as It's taken
> from vendor and untested with Panfrost.
>
> https://lore.kernel.org/patchwork/patch/1060374/
Ok, guess this series should wait then until we can run Panfrost on it
and check how DVFS is working.
Thanks,
Tomeu
> Regards,
> Clément
>
> >
> > Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
> > Cc: Clément Péron <peron.clem@gmail.com>
> >
> > ---
> >
> > Feel free to pick up this patch if you are going to keep pushing this
> > series forward.
> >
> > Thanks,
> >
> > Tomeu
> > ---
> > arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 66 ++++++++++++++++++++
> > 1 file changed, 66 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> > index 6aad06095c40..decf7b56e2df 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> > @@ -157,6 +157,71 @@
> > allwinner,sram = <&ve_sram 1>;
> > };
> >
> > + gpu_opp_table: opp-table2 {
> > + compatible = "operating-points-v2";
> > +
> > + opp00 {
> > + opp-hz = /bits/ 64 <756000000>;
> > + opp-microvolt = <1040000>;
> > + };
> > + opp01 {
> > + opp-hz = /bits/ 64 <624000000>;
> > + opp-microvolt = <950000>;
> > + };
> > + opp02 {
> > + opp-hz = /bits/ 64 <576000000>;
> > + opp-microvolt = <930000>;
> > + };
> > + opp03 {
> > + opp-hz = /bits/ 64 <540000000>;
> > + opp-microvolt = <910000>;
> > + };
> > + opp04 {
> > + opp-hz = /bits/ 64 <504000000>;
> > + opp-microvolt = <890000>;
> > + };
> > + opp05 {
> > + opp-hz = /bits/ 64 <456000000>;
> > + opp-microvolt = <870000>;
> > + };
> > + opp06 {
> > + opp-hz = /bits/ 64 <432000000>;
> > + opp-microvolt = <860000>;
> > + };
> > + opp07 {
> > + opp-hz = /bits/ 64 <420000000>;
> > + opp-microvolt = <850000>;
> > + };
> > + opp08 {
> > + opp-hz = /bits/ 64 <408000000>;
> > + opp-microvolt = <840000>;
> > + };
> > + opp09 {
> > + opp-hz = /bits/ 64 <384000000>;
> > + opp-microvolt = <830000>;
> > + };
> > + opp10 {
> > + opp-hz = /bits/ 64 <360000000>;
> > + opp-microvolt = <820000>;
> > + };
> > + opp11 {
> > + opp-hz = /bits/ 64 <336000000>;
> > + opp-microvolt = <810000>;
> > + };
> > + opp12 {
> > + opp-hz = /bits/ 64 <312000000>;
> > + opp-microvolt = <810000>;
> > + };
> > + opp13 {
> > + opp-hz = /bits/ 64 <264000000>;
> > + opp-microvolt = <810000>;
> > + };
> > + opp14 {
> > + opp-hz = /bits/ 64 <216000000>;
> > + opp-microvolt = <810000>;
> > + };
> > + };
> > +
> > gpu: gpu@1800000 {
> > compatible = "allwinner,sun50i-h6-mali",
> > "arm,mali-t720";
> > @@ -168,6 +233,7 @@
> > clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>;
> > clock-names = "core", "bus";
> > resets = <&ccu RST_BUS_GPU>;
> > + operating-points-v2 = <&gpu_opp_table>;
> > status = "disabled";
> > };
> >
> > --
> > 2.20.1
> >
prev parent reply other threads:[~2019-05-29 15:42 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-21 16:10 [PATCH v6 0/6] Allwinner H6 Mali GPU support Clément Péron
2019-05-21 16:10 ` [PATCH v6 2/6] iommu: io-pgtable: fix sanity check for non 48-bit mali iommu Clément Péron
2019-05-21 16:11 ` [PATCH v6 4/6] dt-bindings: gpu: mali-midgard: Add H6 mali gpu compatible Clément Péron
2019-05-21 16:11 ` [PATCH v6 5/6] arm64: dts: allwinner: Add ARM Mali GPU node for H6 Clément Péron
2019-05-21 16:11 ` [PATCH v6 6/6] arm64: dts: allwinner: Add mali GPU supply for H6 boards Clément Péron
[not found] ` <20190521161102.29620-1-peron.clem-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2019-05-21 16:10 ` [PATCH v6 1/6] drm: panfrost: add optional bus_clock Clément Péron
2019-05-21 16:10 ` [PATCH v6 3/6] dt-bindings: gpu: add bus clock for Mali Midgard GPUs Clément Péron
2019-05-22 19:27 ` [PATCH v6 0/6] Allwinner H6 Mali GPU support Rob Herring
2019-05-22 19:41 ` Clément Péron
2019-05-22 20:51 ` Rob Herring
2019-06-03 17:27 ` Clément Péron
2019-05-24 17:25 ` Robin Murphy
2019-05-29 15:09 ` Tomeu Vizoso
2019-05-29 17:38 ` Robin Murphy
2019-05-31 12:04 ` Tomeu Vizoso
2019-05-31 13:47 ` Robin Murphy
2019-08-28 11:28 ` Neil Armstrong
2019-08-28 11:49 ` Robin Murphy
2019-08-28 11:51 ` Neil Armstrong
2019-06-10 13:30 ` Tomeu Vizoso
2019-05-29 15:32 ` [PATCH] arm64: dts: allwinner: Add GPU operating points for H6 Tomeu Vizoso
2019-05-29 15:37 ` Clément Péron
2019-05-29 15:42 ` Tomeu Vizoso [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAAObsKCWJmx-TKyiHFvUaDtGOpz8SXNOBFK3AbmUWW7KprD2Rw@mail.gmail.com \
--to=tomeu.vizoso@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@bootlin.com \
--cc=peron.clem@gmail.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).