Re: [PATCH v4 2/5] Documentation: bindings: add doc for the Rockchip usb PHY

[Romain Perier <romain.perier-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

Hi,

2014-12-09 3:48 GMT+01:00 Yunzhi Li <lyz-TNX95d0MmH7DzftRWevZcw@public.gmane.org>:
> Document the bindings of the Rockchip usb PHY driver.


Long description is the same than the short one.. So either the long
description is useless
or it can be improved.

>
> +Required properties:
> + - compatible: rockchip,rk3288-usb-phy
> + - rockchip,grf : phandle to the syscon managing the "general
> +   register files"
> + - #phy-cells: should be 1
> + - #address-cells: should be 1
> + - #size-cells: should be 0
> +
> +Sub-nodes:
> +Each PHY should be represented as a sub-node.
> +
> +Sub-nodes
> +required properties:
> +- reg: the PHY number
> +               "0" - PHY connect to OTG controller
> +               "1" - PHY connect to HOST0 controller
> +               "2" - PHY connect to HOST1 controller
> +
> +Optional Properties:
> +- clocks : phandle + clock specifier for the phy clocks
> +
> +Example:
> +
> +usbphy: phy {
> +       #phy-cells = <1>;
> +       #address-cells = <1>;
> +       #size-cells = <0>;
> +       compatible = "rockchip,rk3288-usb-phy";
> +       rockchip,grf = <&grf>;
> +};

Could you reorder these properties to have the same order than in the
"required properties" ? Something like:

usbphy: phy {
       compatible = "rockchip,rk3288-usb-phy";
       rockchip,grf = <&grf>;
       #phy-cells = <1>;
       #address-cells = <1>;
       #size-cells = <0>;
};

Thanks,
Romain
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html