From mboxrd@z Thu Jan 1 00:00:00 1970 From: Matthias Brugger Subject: Re: [PATCH v2 4/4] ARM: debug: qcom: add UART addresses to Kconfig help Date: Thu, 29 May 2014 17:26:58 +0200 Message-ID: References: <1400857952-6963-1-git-send-email-gdjakov@mm-sol.com> <1400857952-6963-5-git-send-email-gdjakov@mm-sol.com> <53834578.9090305@mm-sol.com> <53847FA1.60509@mm-sol.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Return-path: In-Reply-To: <53847FA1.60509@mm-sol.com> Sender: linux-arm-msm-owner@vger.kernel.org To: Georgi Djakov Cc: Russell King , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , sboyd@codeaurora.org, rvaswani@codeaurora.org, davidb@codeaurora.org, "devicetree@vger.kernel.org" , "linux-kernel@vger.kernel.org" , "linux-arm-kernel@lists.infradead.org" , linux-arm-msm@vger.kernel.org List-Id: devicetree@vger.kernel.org 2014-05-27 14:05 GMT+02:00 Georgi Djakov : > On 05/26/2014 08:17 PM, Matthias Brugger wrote: >> 2014-05-26 15:45 GMT+02:00 Georgi Djakov : >>> On 23.05.14, 19:39, Matthias Brugger wrote: >>>> >>>> 2014-05-23 17:12 GMT+02:00 Georgi Djakov : >>>>> >>>>> Add information about the APQ8084 debug UART physical and virtual >>>>> addresses in the DEBUG_QCOM_UARTDM Kconfig help section. >>>>> Requires: https://lkml.org/lkml/2014/4/14/312 >>>>> >>>>> Signed-off-by: Georgi Djakov >>>>> --- >>>>> arch/arm/Kconfig.debug | 1 + >>>>> 1 file changed, 1 insertion(+) >>>>> >>>>> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug >>>>> index 40ee328..e71723d 100644 >>>>> --- a/arch/arm/Kconfig.debug >>>>> +++ b/arch/arm/Kconfig.debug >>>>> @@ -376,6 +376,7 @@ choice >>>>> their output to the serial port on Qualcomm devices. >>>>> >>>>> ARCH DEBUG_UART_PHYS DEBUG_UART_BASE >>>>> + APQ8084 0xf995e000 0xfa75e000 >>>>> MSM8X60 0x19c40000 0xf0040000 >>>>> MSM8960 0x16440000 0xf0040000 >>>>> MSM8974 0xf991e000 0xfa71e000 >>>> >>>> >>>> You don't have any uart defined in your dts. You should add them >>>> before any adding low level debug support. >>>> Otherwise there might be problems in booting a multi-platform kernel. >>>> >>> >>> Thanks for the comment! As the uart depends on clocks, i am adding it to the >>> dts as part of my global clock controller patchset [1]. >>> In this patch i am just adding some information to the help section. >>> Do you see any problem with this? >> >> Are the patches for the clock controller applied already? >> If not, I would consider to add this patch to clock controller series. >> > > No, they are not applied yet. The uart dts definition depends on clocks, but the > DEBUG_LL support does not. And the DEBUG_LL support is already there as it is > common with other SoCs. I am sorry, but i don't see dependency between the dts > definition and this patch. Could you explain please? IMHO the dependancy is that DEBUG_LL uses the uart device, and this is added when you add the dts. AFAIK there can arise problems with multi-platform kernels if the uart is not present. > > Thanks, > Georgi > -- motzblog.wordpress.com