* basic linksys ea6500v2 dts @ 2018-10-01 22:07 René Kjellerup 2018-10-04 21:08 ` Adding a Basic DT for the Linksys ea6500 v2 wireless home router René Kjellerup 0 siblings, 1 reply; 8+ messages in thread From: René Kjellerup @ 2018-10-01 22:07 UTC (permalink / raw) To: Hauke Mehrtens, Rafał Miłecki Cc: Rob Herring, Mark Rutland, Jon Mason, bcm-kernel-feedback-list, devicetree, linux-kernel, linux-arm-kernel [-- Attachment #1.1: Type: text/plain, Size: 454 bytes --] Hi Hauke, thank you for suggesting adding the dts patch to mainline kernel, so here it is. I feel Rafal technically still have the copyrights, this is pretty much just a few string updates for the ea6500v2. However with this dts in latest OpenWrt 18.06 loads and installs on my device. I will be available to do more testing should it be required. Regrads Rene Kjellerup -- -- as life grows older, I gain experience. -- http://www.alchemiestick.net/ [-- Attachment #1.2: Type: text/html, Size: 815 bytes --] [-- Attachment #2: 0001-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6500-V2.patch --] [-- Type: text/x-patch, Size: 2263 bytes --] From bdc4429353ee04f497495016c9eebac18860390c Mon Sep 17 00:00:00 2001 From: Rene Kjellerup <rk.katana.steel@gmail.com> Date: Mon, 1 Oct 2018 14:11:56 -0700 Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2 It's wireless home router based on BCM4708A0 with BCM4360 + BCM4331 wireless chipsets. The BCM4331 5GHz chip currently isn't supported only due to missing compatible firmware. Signed-off-by: Rene Kjellerup <rk.katana.steel@gmail.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts | 45 +++++++++++++++++++++++++ 2 files changed, 46 insertions(+) create mode 100644 arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b5bd3de87c33..adf8f28f5e44 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -88,6 +88,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-asus-rt-ac68u.dtb \ bcm4708-buffalo-wzr-1750dhp.dtb \ bcm4708-linksys-ea6300-v1.dtb \ + bcm4708-linksys-ea6500-v2.dtb \ bcm4708-luxul-xap-1510.dtb \ bcm4708-luxul-xwc-1000.dtb \ bcm4708-netgear-r6250.dtb \ diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts new file mode 100644 index 000000000000..babcfec50dde --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl> + * Copyright (C) 2018 Rene Kjellerup <rk.katana.steel@gmail.com> + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "linksys,ea6500-v2", "brcm,bcm4708"; + model = "Linksys EA6500 V2"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb3_phy { + status = "okay"; +}; -- 2.16.4 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Adding a Basic DT for the Linksys ea6500 v2 wireless home router 2018-10-01 22:07 basic linksys ea6500v2 dts René Kjellerup @ 2018-10-04 21:08 ` René Kjellerup 2018-10-07 21:08 ` Hauke Mehrtens 0 siblings, 1 reply; 8+ messages in thread From: René Kjellerup @ 2018-10-04 21:08 UTC (permalink / raw) To: Hauke Mehrtens, Rafał Miłecki Cc: Cc: Rob Herring, Mark Rutland, Jon Mason, bcm-kernel-feedback-list, devicetree, linux-kernel, linux-arm-kernel [-- Attachment #1: Type: text/plain, Size: 453 bytes --] Hi Hauke, thank you for suggesting adding the dts patch to mainline kernel, so here it is. I feel Rafal technically still have the copyrights, this is pretty much just a few string updates for the ea6500v2. However with this dts in latest OpenWrt 18.06 loads and installs on my device. I will be available to do more testing should it be required. Regrads Rene Kjellerup -- -- as life grows older, I gain experience. -- http://www.alchemiestick.net/ [-- Attachment #2: 0001-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6500-V2.patch --] [-- Type: application/x-patch, Size: 2263 bytes --] ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Adding a Basic DT for the Linksys ea6500 v2 wireless home router 2018-10-04 21:08 ` Adding a Basic DT for the Linksys ea6500 v2 wireless home router René Kjellerup @ 2018-10-07 21:08 ` Hauke Mehrtens 2018-10-08 16:34 ` René Kjellerup 0 siblings, 1 reply; 8+ messages in thread From: Hauke Mehrtens @ 2018-10-07 21:08 UTC (permalink / raw) To: René Kjellerup Cc: Rafał Miłecki, Cc: Rob Herring, Mark Rutland, Jon Mason, bcm-kernel-feedback-list, devicetree, linux-kernel, linux-arm-kernel [-- Attachment #1.1: Type: text/plain, Size: 841 bytes --] On 10/04/2018 11:08 PM, René Kjellerup wrote: > Hi Hauke, > > thank you for suggesting adding the dts patch to mainline kernel, > so here it is. > I feel Rafal technically still have the copyrights, this is pretty > much just a few string updates for the ea6500v2. However with this > dts in latest OpenWrt 18.06 loads and installs on my device. > > I will be available to do more testing should it be required. > > Regrads > Rene Kjellerup > -- > -- as life grows older, I gain experience. > -- http://www.alchemiestick.net/ > Hi Rene, Please send you patch inline in the mail and not as an attachment, I would suggest to use "git send-email" for sending the patch. Adding Rafal as copyright owner is ok, like you did it now. You could mention in the file header on which dts file this is based. Hauke [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Adding a Basic DT for the Linksys ea6500 v2 wireless home router 2018-10-07 21:08 ` Hauke Mehrtens @ 2018-10-08 16:34 ` René Kjellerup 2018-11-27 0:49 ` René Kjellerup 0 siblings, 1 reply; 8+ messages in thread From: René Kjellerup @ 2018-10-08 16:34 UTC (permalink / raw) To: Hauke Mehrtens Cc: Rafał Miłecki, Rob Herring, Mark Rutland, Jon Mason, bcm-kernel-feedback-list, devicetree, linux-kernel, linux-arm-kernel Hi Hauke, Updated the file header per your suggestion. >From e97c15ef78d2535c23f32ebbec43bced72b5eaf7 Mon Sep 17 00:00:00 2001 From: Rene Kjellerup <rk.katana.steel@gmail.com> Date: Mon, 1 Oct 2018 14:11:56 -0700 Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2 It's wireless home router based on BCM4708A0 with BCM4360 + BCM4331 wireless chipsets. The 5GHz chip currently isn't supported only due to missing compatible firmware. the DTS here was based on the Linksys EA6300 V1 DTS, only changing the model strings Signed-off-by: Rene Kjellerup <rk.katana.steel@gmail.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts | 47 +++++++++++++++++++++++++ 2 files changed, 48 insertions(+) create mode 100644 arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b5bd3de87c33..adf8f28f5e44 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -88,6 +88,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-asus-rt-ac68u.dtb \ bcm4708-buffalo-wzr-1750dhp.dtb \ bcm4708-linksys-ea6300-v1.dtb \ + bcm4708-linksys-ea6500-v2.dtb \ bcm4708-luxul-xap-1510.dtb \ bcm4708-luxul-xwc-1000.dtb \ bcm4708-netgear-r6250.dtb \ diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts new file mode 100644 index 000000000000..8a434d2a4b72 --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl> + * Copyright (C) 2018 Rene Kjellerup <rk.katana.steel@gmail.com> + * + * this DTS was originally based on bcm4708-linksys-ea6300-v1.dts + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "linksys,ea6500-v2", "brcm,bcm4708"; + model = "Linksys EA6500 V2"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb3_phy { + status = "okay"; +}; -- 2.16.4 On Sun, Oct 7, 2018 at 2:08 PM Hauke Mehrtens <hauke@hauke-m.de> wrote: > > On 10/04/2018 11:08 PM, René Kjellerup wrote: > > Hi Hauke, > > > > thank you for suggesting adding the dts patch to mainline kernel, > > so here it is. > > I feel Rafal technically still have the copyrights, this is pretty > > much just a few string updates for the ea6500v2. However with this > > dts in latest OpenWrt 18.06 loads and installs on my device. > > > > I will be available to do more testing should it be required. > > > > Regrads > > Rene Kjellerup > > -- > > -- as life grows older, I gain experience. > > -- http://www.alchemiestick.net/ > > > > Hi Rene, > > Please send you patch inline in the mail and not as an attachment, I > would suggest to use "git send-email" for sending the patch. > > Adding Rafal as copyright owner is ok, like you did it now. You could > mention in the file header on which dts file this is based. > > Hauke > -- -- as life grows older, I gain experience. -- http://www.alchemiestick.net/apps/ ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: Adding a Basic DT for the Linksys ea6500 v2 wireless home router 2018-10-08 16:34 ` René Kjellerup @ 2018-11-27 0:49 ` René Kjellerup 2018-11-28 0:23 ` Florian Fainelli 0 siblings, 1 reply; 8+ messages in thread From: René Kjellerup @ 2018-11-27 0:49 UTC (permalink / raw) To: Hauke Mehrtens Cc: Rafał Miłecki, Rob Herring, Mark Rutland, bcm-kernel-feedback-list, devicetree, linux-kernel, linux-arm-kernel To the broadcom kernel maintainers, (for BCM4708 CPUs) I just want to add a little attention to this patch again... let me know if there's any concerns and I will try to address highlighted issues as soon as possible. I've been running the development builds of OpenWrt kernels, where this patch has been included, on my Linksys EA6500v2 router for the past months, updating as new builds are available. With only the on board BCM4360 chip (5GHz WiFi) is being disabled, has so far been stable for my use case. thank you for the consideration Rene (aka Katana_Steel) On Mon, Oct 8, 2018 at 9:34 AM René Kjellerup <rk.katana.steel@gmail.com> wrote: > > Hi Hauke, > > Updated the file header per your suggestion. > > From e97c15ef78d2535c23f32ebbec43bced72b5eaf7 Mon Sep 17 00:00:00 2001 > From: Rene Kjellerup <rk.katana.steel@gmail.com> > Date: Mon, 1 Oct 2018 14:11:56 -0700 > Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2 > > It's wireless home router based on BCM4708A0 with BCM4360 + BCM4331 > wireless chipsets. The 5GHz chip currently isn't supported only due > to missing compatible firmware. > > the DTS here was based on the Linksys EA6300 V1 DTS, only changing > the model strings > > Signed-off-by: Rene Kjellerup <rk.katana.steel@gmail.com> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts | 47 +++++++++++++++++++++++++ > 2 files changed, 48 insertions(+) > create mode 100644 arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index b5bd3de87c33..adf8f28f5e44 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -88,6 +88,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ > bcm4708-asus-rt-ac68u.dtb \ > bcm4708-buffalo-wzr-1750dhp.dtb \ > bcm4708-linksys-ea6300-v1.dtb \ > + bcm4708-linksys-ea6500-v2.dtb \ > bcm4708-luxul-xap-1510.dtb \ > bcm4708-luxul-xwc-1000.dtb \ > bcm4708-netgear-r6250.dtb \ > diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts > b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts > new file mode 100644 > index 000000000000..8a434d2a4b72 > --- /dev/null > +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts > @@ -0,0 +1,47 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT > +/* > + * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl> > + * Copyright (C) 2018 Rene Kjellerup <rk.katana.steel@gmail.com> > + * > + * this DTS was originally based on bcm4708-linksys-ea6300-v1.dts > + */ > + > +/dts-v1/; > + > +#include "bcm4708.dtsi" > +#include "bcm5301x-nand-cs0-bch8.dtsi" > + > +/ { > + compatible = "linksys,ea6500-v2", "brcm,bcm4708"; > + model = "Linksys EA6500 V2"; > + > + chosen { > + bootargs = "console=ttyS0,115200"; > + }; > + > + memory { > + reg = <0x00000000 0x08000000>; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + wps { > + label = "WPS"; > + linux,code = <KEY_WPS_BUTTON>; > + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; > + }; > + > + restart { > + label = "Reset"; > + linux,code = <KEY_RESTART>; > + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; > + }; > + }; > +}; > + > +&usb3_phy { > + status = "okay"; > +}; > -- > 2.16.4 > > On Sun, Oct 7, 2018 at 2:08 PM Hauke Mehrtens <hauke@hauke-m.de> wrote: > > > > On 10/04/2018 11:08 PM, René Kjellerup wrote: > > > Hi Hauke, > > > > > > thank you for suggesting adding the dts patch to mainline kernel, > > > so here it is. > > > I feel Rafal technically still have the copyrights, this is pretty > > > much just a few string updates for the ea6500v2. However with this > > > dts in latest OpenWrt 18.06 loads and installs on my device. > > > > > > I will be available to do more testing should it be required. > > > > > > Regrads > > > Rene Kjellerup > > > -- > > > -- as life grows older, I gain experience. > > > -- http://www.alchemiestick.net/ > > > > > > > Hi Rene, > > > > Please send you patch inline in the mail and not as an attachment, I > > would suggest to use "git send-email" for sending the patch. > > > > Adding Rafal as copyright owner is ok, like you did it now. You could > > mention in the file header on which dts file this is based. > > > > Hauke > > > > > -- > -- as life grows older, I gain experience. > -- http://www.alchemiestick.net/apps/ ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Adding a Basic DT for the Linksys ea6500 v2 wireless home router 2018-11-27 0:49 ` René Kjellerup @ 2018-11-28 0:23 ` Florian Fainelli 2018-11-28 2:09 ` René Kjellerup 0 siblings, 1 reply; 8+ messages in thread From: Florian Fainelli @ 2018-11-28 0:23 UTC (permalink / raw) To: René Kjellerup, Hauke Mehrtens Cc: Rafał Miłecki, Rob Herring, Mark Rutland, bcm-kernel-feedback-list, devicetree, linux-kernel, linux-arm-kernel On 11/26/18 4:49 PM, René Kjellerup wrote: > To the broadcom kernel maintainers, (for BCM4708 CPUs) > > I just want to add a little attention to this patch again... > let me know if there's any concerns and I will try to address highlighted issues > as soon as possible. > > I've been running the development builds of OpenWrt kernels, where > this patch has > been included, on my Linksys EA6500v2 router for the past months, > updating as new > builds are available. With only the on board BCM4360 chip (5GHz WiFi) is being > disabled, has so far been stable for my use case. (Please no top posting). Your submission did make it through patchwork and looks okay, I will run build tests and queue it up for 4.21 if everything looks good. Thanks. > > thank you for the consideration > Rene (aka Katana_Steel) > > On Mon, Oct 8, 2018 at 9:34 AM René Kjellerup <rk.katana.steel@gmail.com> wrote: >> >> Hi Hauke, >> >> Updated the file header per your suggestion. >> >> From e97c15ef78d2535c23f32ebbec43bced72b5eaf7 Mon Sep 17 00:00:00 2001 >> From: Rene Kjellerup <rk.katana.steel@gmail.com> >> Date: Mon, 1 Oct 2018 14:11:56 -0700 >> Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2 >> >> It's wireless home router based on BCM4708A0 with BCM4360 + BCM4331 >> wireless chipsets. The 5GHz chip currently isn't supported only due >> to missing compatible firmware. >> >> the DTS here was based on the Linksys EA6300 V1 DTS, only changing >> the model strings >> >> Signed-off-by: Rene Kjellerup <rk.katana.steel@gmail.com> >> --- >> arch/arm/boot/dts/Makefile | 1 + >> arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts | 47 +++++++++++++++++++++++++ >> 2 files changed, 48 insertions(+) >> create mode 100644 arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts >> >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> index b5bd3de87c33..adf8f28f5e44 100644 >> --- a/arch/arm/boot/dts/Makefile >> +++ b/arch/arm/boot/dts/Makefile >> @@ -88,6 +88,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ >> bcm4708-asus-rt-ac68u.dtb \ >> bcm4708-buffalo-wzr-1750dhp.dtb \ >> bcm4708-linksys-ea6300-v1.dtb \ >> + bcm4708-linksys-ea6500-v2.dtb \ >> bcm4708-luxul-xap-1510.dtb \ >> bcm4708-luxul-xwc-1000.dtb \ >> bcm4708-netgear-r6250.dtb \ >> diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts >> b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts >> new file mode 100644 >> index 000000000000..8a434d2a4b72 >> --- /dev/null >> +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts >> @@ -0,0 +1,47 @@ >> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT >> +/* >> + * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl> >> + * Copyright (C) 2018 Rene Kjellerup <rk.katana.steel@gmail.com> >> + * >> + * this DTS was originally based on bcm4708-linksys-ea6300-v1.dts >> + */ >> + >> +/dts-v1/; >> + >> +#include "bcm4708.dtsi" >> +#include "bcm5301x-nand-cs0-bch8.dtsi" >> + >> +/ { >> + compatible = "linksys,ea6500-v2", "brcm,bcm4708"; >> + model = "Linksys EA6500 V2"; >> + >> + chosen { >> + bootargs = "console=ttyS0,115200"; >> + }; >> + >> + memory { >> + reg = <0x00000000 0x08000000>; >> + }; >> + >> + gpio-keys { >> + compatible = "gpio-keys"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + wps { >> + label = "WPS"; >> + linux,code = <KEY_WPS_BUTTON>; >> + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; >> + }; >> + >> + restart { >> + label = "Reset"; >> + linux,code = <KEY_RESTART>; >> + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; >> + }; >> + }; >> +}; >> + >> +&usb3_phy { >> + status = "okay"; >> +}; >> -- >> 2.16.4 >> >> On Sun, Oct 7, 2018 at 2:08 PM Hauke Mehrtens <hauke@hauke-m.de> wrote: >>> >>> On 10/04/2018 11:08 PM, René Kjellerup wrote: >>>> Hi Hauke, >>>> >>>> thank you for suggesting adding the dts patch to mainline kernel, >>>> so here it is. >>>> I feel Rafal technically still have the copyrights, this is pretty >>>> much just a few string updates for the ea6500v2. However with this >>>> dts in latest OpenWrt 18.06 loads and installs on my device. >>>> >>>> I will be available to do more testing should it be required. >>>> >>>> Regrads >>>> Rene Kjellerup >>>> -- >>>> -- as life grows older, I gain experience. >>>> -- http://www.alchemiestick.net/ >>>> >>> >>> Hi Rene, >>> >>> Please send you patch inline in the mail and not as an attachment, I >>> would suggest to use "git send-email" for sending the patch. >>> >>> Adding Rafal as copyright owner is ok, like you did it now. You could >>> mention in the file header on which dts file this is based. >>> >>> Hauke >>> >> >> >> -- >> -- as life grows older, I gain experience. >> -- http://www.alchemiestick.net/apps/ -- Florian ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Adding a Basic DT for the Linksys ea6500 v2 wireless home router 2018-11-28 0:23 ` Florian Fainelli @ 2018-11-28 2:09 ` René Kjellerup 2018-11-30 18:36 ` Florian Fainelli 0 siblings, 1 reply; 8+ messages in thread From: René Kjellerup @ 2018-11-28 2:09 UTC (permalink / raw) To: Florian Fainelli Cc: Hauke Mehrtens, Rafał Miłecki, Rob Herring, Mark Rutland, bcm-kernel-feedback-list, devicetree, linux-kernel, linux-arm-kernel [-- Attachment #1: Type: text/plain, Size: 1073 bytes --] On Tue, Nov 27, 2018 at 4:23 PM Florian Fainelli <f.fainelli@gmail.com> wrote: > > > > On 11/26/18 4:49 PM, René Kjellerup wrote: > > To the broadcom kernel maintainers, (for BCM4708 CPUs) > > > > I just want to add a little attention to this patch again... > > let me know if there's any concerns and I will try to address highlighted issues > > as soon as possible. > > > > I've been running the development builds of OpenWrt kernels, where > > this patch has > > been included, on my Linksys EA6500v2 router for the past months, > > updating as new > > builds are available. With only the on board BCM4360 chip (5GHz WiFi) is being > > disabled, has so far been stable for my use case. > > (Please no top posting). Your submission did make it through patchwork > and looks okay, I will run build tests and queue it up for 4.21 if > everything looks good. Thanks. > ... > > -- > Florian thank you Florian for the update I appreciate the feedback Rene -- -- as life grows older, I gain experience. -- http://www.alchemiestick.net/ [-- Attachment #2: Type: text/html, Size: 1519 bytes --] ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Adding a Basic DT for the Linksys ea6500 v2 wireless home router 2018-11-28 2:09 ` René Kjellerup @ 2018-11-30 18:36 ` Florian Fainelli 0 siblings, 0 replies; 8+ messages in thread From: Florian Fainelli @ 2018-11-30 18:36 UTC (permalink / raw) To: René Kjellerup, Florian Fainelli Cc: Hauke Mehrtens, Rafał Miłecki, Rob Herring, Mark Rutland, bcm-kernel-feedback-list, devicetree, linux-kernel, linux-arm-kernel On 11/27/18 6:09 PM, René Kjellerup wrote: > > On Tue, Nov 27, 2018 at 4:23 PM Florian Fainelli <f.fainelli@gmail.com > <mailto:f.fainelli@gmail.com>> wrote: >> >> >> >> On 11/26/18 4:49 PM, René Kjellerup wrote: >> > To the broadcom kernel maintainers, (for BCM4708 CPUs) >> > >> > I just want to add a little attention to this patch again... >> > let me know if there's any concerns and I will try to address > highlighted issues >> > as soon as possible. >> > >> > I've been running the development builds of OpenWrt kernels, where >> > this patch has >> > been included, on my Linksys EA6500v2 router for the past months, >> > updating as new >> > builds are available. With only the on board BCM4360 chip (5GHz > WiFi) is being >> > disabled, has so far been stable for my use case. >> >> (Please no top posting). Your submission did make it through patchwork >> and looks okay, I will run build tests and queue it up for 4.21 if >> everything looks good. Thanks. >> > ... >> >> -- >> Florian > > thank you Florian for the update > I appreciate the feedback Now applied to devicetree/next, thanks. Please use git format-patch/send-email in the future, as the patch was mangled a little bit by being sent within the message body. Thank you -- Florian ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2018-11-30 18:36 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2018-10-01 22:07 basic linksys ea6500v2 dts René Kjellerup 2018-10-04 21:08 ` Adding a Basic DT for the Linksys ea6500 v2 wireless home router René Kjellerup 2018-10-07 21:08 ` Hauke Mehrtens 2018-10-08 16:34 ` René Kjellerup 2018-11-27 0:49 ` René Kjellerup 2018-11-28 0:23 ` Florian Fainelli 2018-11-28 2:09 ` René Kjellerup 2018-11-30 18:36 ` Florian Fainelli
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).