From mboxrd@z Thu Jan 1 00:00:00 1970 From: Linus Walleij Subject: Re: [PATCH 1/2] mfd: stmpe: DT: Enable no-irq mode configuration Date: Fri, 22 Mar 2013 09:14:21 +0100 Message-ID: References: <1362139636-23579-1-git-send-email-linus.walleij@stericsson.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1362139636-23579-1-git-send-email-linus.walleij-0IS4wlFg1OjSUeElwK9/Pw@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: devicetree-discuss-bounces+gldd-devicetree-discuss=m.gmane.org-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org Sender: "devicetree-discuss" To: Samuel Ortiz Cc: Anmar Oueja , Gabriel Fernandez , devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org On Fri, Mar 1, 2013 at 1:07 PM, Linus Walleij wrote: > From: Gabriel Fernandez > > If there is no interrupt property into stmpe node > then activate the no-irq mode by setting the irq > value to -1. > > Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org > Signed-off-by: Gabriel Fernandez > Signed-off-by: Linus Walleij Hi Sam, ping on this! Yours, Linus Walleij