[PATCH v3 0/2] pinctrl: Add Cypress cy8c95x0

[PATCH v3 0/2] pinctrl: Add Cypress cy8c95x0

[Patrick Rudolph]

Add Cypress cy8c95x0 pinctrl support.

v3:
 - Update DT binding
 - Fix direction mask calculation in irq_bus_sync_unlock
 - Set can_sleep to true

v2:
 - Update DT binding
 - Support output pincfg through DT
 - Always expose all GPIOs and ignore ngpios property

Patrick Rudolph (2):
  dt-binding: pinctrl: Add cypress,cy8c95x0
  pinctrl: Add Cypress cy8c95x0 support

 .../bindings/pinctrl/cypress,cy8c95x0.yaml    |  134 ++
 MAINTAINERS                                   |    6 +
 drivers/pinctrl/Kconfig                       |   14 +
 drivers/pinctrl/Makefile                      |    1 +
 drivers/pinctrl/pinctrl-cy8c95x0.c            | 1381 +++++++++++++++++
 5 files changed, 1536 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml
 create mode 100644 drivers/pinctrl/pinctrl-cy8c95x0.c

-- 
2.37.1

[PATCH v3 1/2] dt-binding: pinctrl: Add cypress,cy8c95x0

[Patrick Rudolph]

Added device tree binding documentation for
Cypress CY8C95x0 I2C pin-controller.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
---
 .../bindings/pinctrl/cypress,cy8c95x0.yaml    | 134 ++++++++++++++++++
 1 file changed, 134 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml
new file mode 100644
index 000000000000..915cbbcc3555
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/cypress,cy8c95x0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress CY8C95X0 I2C GPIO expander
+
+maintainers:
+  - Patrick Rudolph <patrick.rudolph@9elements.com>
+
+description: |
+  This supports the 20/40/60 pin Cypress CYC95x0 GPIO I2C expanders.
+  Pin function configuration is performed on a per-pin basis.
+
+properties:
+  compatible:
+    enum:
+      - cypress,cy8c9520
+      - cypress,cy8c9540
+      - cypress,cy8c9560
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      The first cell is the GPIO number and the second cell specifies GPIO
+      flags, as defined in <dt-bindings/gpio/gpio.h>.
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  gpio-line-names: true
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      Optional power supply.
+
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: pincfg-node.yaml#
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: '^gp([0-7][0-7])$'
+        minItems: 1
+        maxItems: 60
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ gpio, pwm ]
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+      drive-push-pull: true
+
+      drive-open-drain: true
+
+      drive-open-source: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pinctrl@20 {
+        compatible = "cypress,cy8c9520";
+        reg = <0x20>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        vdd-supply = <&p3v3>;
+        gpio-reserved-ranges = <5 1>;
+      };
+    };
-- 
2.37.1

Re: [PATCH v3 1/2] dt-binding: pinctrl: Add cypress,cy8c95x0

[Krzysztof Kozlowski]

On 16/08/2022 08:49, Patrick Rudolph wrote:
> Added device tree binding documentation for
> Cypress CY8C95x0 I2C pin-controller.
> 
> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

Re: [PATCH v3 1/2] dt-binding: pinctrl: Add cypress,cy8c95x0

[Linus Walleij]

On Tue, Aug 16, 2022 at 7:49 AM Patrick Rudolph
<patrick.rudolph@9elements.com> wrote:

> Added device tree binding documentation for
> Cypress CY8C95x0 I2C pin-controller.
>
> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>

Patch applied!

Yours,
Linus Walleij