Re: [PATCH v4 1/4] dt-bindings: gpio: Add bindings for Toshiba Visconti GPIO Controller

[Linus Walleij <linus.walleij@linaro.org>]

Looping in Marc here:

On Fri, Dec 11, 2020 at 1:43 AM Nobuhiro Iwamatsu
<nobuhiro1.iwamatsu@toshiba.co.jp> wrote:

> Add bindings for the Toshiba Visconti GPIO Controller.
>
> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp>
(...)
> +          interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
> +              <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
> +              <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
> +              <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
> +              <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
> +              <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
> +              <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
> +              <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
> +              <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
> +              <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
> +              <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
> +              <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
> +              <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
> +              <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
> +              <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
> +              <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;

This is an hierarchical IRQ controller. (These IRQs are mapped 1-to-1
to IRQ lines.)
I was under the impression that we don't encode interrupts into the GPIO
controller like this when we have that.

Instead, hardcode these into the driver. The compatible string gives
away how the
local offsets map to the GIC IRQs.

Add no interrupts to the node but make sure that the GIC is the parent.
(Should be default.)

Compare e.g.
Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt

Which has a similar "some hierarchical IRQs" setup.

Yours,
Linus Walleij