From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?UTF-8?B?UmFmYcWCIE1pxYJlY2tp?= Subject: Re: [PATCH 1/2] dt-bindings: document common IEEE 802.11 frequency properties Date: Wed, 4 Jan 2017 15:53:38 +0100 Message-ID: References: <20161228155955.25518-1-zajec5@gmail.com> <20170103195514.vf4psb6qw2bd2lcw@rob-hp-laptop> <874m1ej3oz.fsf@kamboji.qca.qualcomm.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Return-path: In-Reply-To: <874m1ej3oz.fsf-HodKDYzPHsUD5k0oWYwrnHL1okKdlPRT@public.gmane.org> Sender: linux-wireless-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Kalle Valo Cc: Rob Herring , "linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" , Martin Blumenstingl , Felix Fietkau , Arnd Bergmann , "devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" , =?UTF-8?B?UmFmYcWCIE1pxYJlY2tp?= List-Id: devicetree@vger.kernel.org On 4 January 2017 at 15:32, Kalle Valo wrote: > Rafa=C5=82 Mi=C5=82ecki writes: > >> On 3 January 2017 at 20:55, Rob Herring wrote: >>> On Wed, Dec 28, 2016 at 04:59:54PM +0100, Rafa=C5=82 Mi=C5=82ecki wrote= : >>>> From: Rafa=C5=82 Mi=C5=82ecki >>>> >>>> This new file should be used for properties handled at higher level an= d >>>> so usable with all drivers. >>> >>> Why is this needed? Where would this data normally come from? >> >> Vendors limit choice of channels at their web user interface level. I >> want to do better and report proper channels directly at kernel level >> instead of masking them in every possible configuration tool. > > Why do vendors limit the channels? Is it because of a hardware > limitation (antenna does not support, or not calibrated, for a certain > band etc) or something else? Please review & comment on the latest version, currently V5: https://patchwork.kernel.org/patch/9495795/ "This can be used to specify extra hardware limitations caused by e.g. used antennas or power amplifiers." --=20 Rafa=C5=82