Re: [PATCH v2 2/3] arm64: allwinner: axp803: Add drivevbus regulator

[Jagan Teki <jagannadh.teki-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

On Fri, Dec 8, 2017 at 8:22 AM, Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org> wrote:
> On Fri, Dec 8, 2017 at 3:04 AM, Jagan Teki <jagannadh.teki-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>> Add reg_drivevbus regualtor for boards which are using
>> external regulator to drive the OTG VBus through N_VBUSEN
>> PMIC pin.
>>
>> Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
>> ---
>> Changes for v2:
>> - New patch
>>
>>  arch/arm64/boot/dts/allwinner/axp803.dtsi | 5 +++++
>>  1 file changed, 5 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi
>> index ff8af52..e5eae8b 100644
>> --- a/arch/arm64/boot/dts/allwinner/axp803.dtsi
>> +++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi
>> @@ -146,5 +146,10 @@
>>                         regulator-max-microvolt = <3000000>;
>>                         regulator-name = "rtc-ldo";
>>                 };
>> +
>> +               reg_drivevbus: drivevbus {
>
> Could you keep the nodes in alphabetical order please?

thought the same, but this seems to be different regulator from above
AXP_DESC regulators and even binding documentation follow this order.

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.