From mboxrd@z Thu Jan 1 00:00:00 1970 From: Li Yang Subject: Re: [PATCH v1] arm64: dts: dwc3: Add description of 'configure-gfladj' Date: Wed, 5 Sep 2018 15:08:32 -0500 Message-ID: References: <20180829073324.36866-1-yinbo.zhu@nxp.com> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Return-path: In-Reply-To: <20180829073324.36866-1-yinbo.zhu@nxp.com> Sender: linux-kernel-owner@vger.kernel.org To: Yinbo Zhu Cc: Shawn Guo , Rob Herring , Mark Rutland , Xiaobo Xie , Ran Wang , Greg Kroah-Hartman , linux-usb@vger.kernel.org, "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" , lkml , Fabio Estevam List-Id: devicetree@vger.kernel.org On Wed, Aug 29, 2018 at 2:38 AM Yinbo Zhu wrote: > > This patch is to add description of 'configure-gfladj' to binding > so that configuring devicetree > > Signed-off-by: Yinbo Zhu This patch should be sent to the DWC3 driver maintainer to review and probably merged through usb tree. You shouldn't use the arm64: dts: prefix for this patch either. > --- > Documentation/devicetree/bindings/usb/dwc3.txt | 1 + > 1 files changed, 1 insertions(+), 0 deletions(-) > > diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt > index 3e4c38b..40c6568 100644 > --- a/Documentation/devicetree/bindings/usb/dwc3.txt > +++ b/Documentation/devicetree/bindings/usb/dwc3.txt > @@ -101,6 +101,7 @@ Optional properties: > When just one value, which means INCRX burst mode enabled. When > more than one value, which means undefined length INCR burst type > enabled. The values can be 1, 4, 8, 16, 32, 64, 128 and 256. > + - configure-gfladj: determine whether frame length adjustment is required or not. > > - in addition all properties from usb-xhci.txt from the current directory are > supported as well > -- > 1.7.1 >