[PATCH V3 0/2] Add DT support for audio clock gating resets for SC7280

[PATCH V3 0/2] Add DT support for audio clock gating resets for SC7280

[Satya Priya]

Satya Priya (1):
  arm64: dts: qcom: sc7280: Cleanup the lpasscc node

Taniya Das (1):
  arm64: dts: qcom: sc7280: Update lpassaudio clock controller for
    resets

 arch/arm64/boot/dts/qcom/sc7280.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

-- 
2.7.4

[PATCH V3 1/2] arm64: dts: qcom: sc7280: Cleanup the lpasscc node

[Satya Priya]

Remove "cc" regmap from lpasscc node which is overlapping
with the lpass_aon regmap.

Fixes: 422a295221bb ("arm64: dts: qcom: sc7280: Add clock controller nodes")
Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
---
Changes since v2:
 - Cleanup the lpasscc node to handle regmap overlap with lpass_aon
   instead of disabling the lpasscc node.
 - This patch is added in v3.

 arch/arm64/boot/dts/qcom/sc7280.dtsi | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 13d7f26..71735bb 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2168,9 +2168,8 @@
 		lpasscc: lpasscc@3000000 {
 			compatible = "qcom,sc7280-lpasscc";
 			reg = <0 0x03000000 0 0x40>,
-			      <0 0x03c04000 0 0x4>,
-			      <0 0x03389000 0 0x24>;
-			reg-names = "qdsp6ss", "top_cc", "cc";
+				  <0 0x03c04000 0 0x4>;
+			reg-names = "qdsp6ss", "top_cc";
 			clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>;
 			clock-names = "iface";
 			#clock-cells = <1>;
-- 
2.7.4

Re: [PATCH V3 1/2] arm64: dts: qcom: sc7280: Cleanup the lpasscc node

[Stephen Boyd]

Quoting Satya Priya (2022-07-20 04:22:23)
> Remove "cc" regmap from lpasscc node which is overlapping
> with the lpass_aon regmap.

Is there a binding update for qcom,sc7280-lpasscc?

[PATCH V3 2/2] arm64: dts: qcom: sc7280: Update lpassaudio clock controller for resets

[Satya Priya]

From: Taniya Das <quic_tdas@quicinc.com>

The lpass audio supports TX/RX/WSA block resets. Also to keep
consistency update lpasscore to lpass_core.

Fixes: 9499240d15f2 ("arm64: dts: qcom: sc7280: Add lpasscore & lpassaudio clock controllers")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
---
Changes since v3:
 - Remove the status="disabled" from lpasscc node.

 arch/arm64/boot/dts/qcom/sc7280.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 71735bb..c641f0b 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2184,6 +2184,7 @@
 			power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
 			#clock-cells = <1>;
 			#power-domain-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		lpass_aon: clock-controller@3380000 {
@@ -2191,13 +2192,13 @@
 			reg = <0 0x03380000 0 0x30000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 			       <&rpmhcc RPMH_CXO_CLK_A>,
-			       <&lpasscore LPASS_CORE_CC_CORE_CLK>;
+			       <&lpass_core LPASS_CORE_CC_CORE_CLK>;
 			clock-names = "bi_tcxo", "bi_tcxo_ao", "iface";
 			#clock-cells = <1>;
 			#power-domain-cells = <1>;
 		};
 
-		lpasscore: clock-controller@3900000 {
+		lpass_core: clock-controller@3900000 {
 			compatible = "qcom,sc7280-lpasscorecc";
 			reg = <0 0x03900000 0 0x50000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
-- 
2.7.4

Re: [PATCH V3 2/2] arm64: dts: qcom: sc7280: Update lpassaudio clock controller for resets

[Stephen Boyd]

Quoting Satya Priya (2022-07-20 04:22:24)
> From: Taniya Das <quic_tdas@quicinc.com>
>
> The lpass audio supports TX/RX/WSA block resets. Also to keep
> consistency update lpasscore to lpass_core.

Consistency with what?

>
> Fixes: 9499240d15f2 ("arm64: dts: qcom: sc7280: Add lpasscore & lpassaudio clock controllers")
> Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
> Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
> ---
> Changes since v3:
>  - Remove the status="disabled" from lpasscc node.
>
>  arch/arm64/boot/dts/qcom/sc7280.dtsi | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 71735bb..c641f0b 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -2184,6 +2184,7 @@
>                         power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
>                         #clock-cells = <1>;
>                         #power-domain-cells = <1>;
> +                       #reset-cells = <1>;

Is there a binding update for qcom,sc7280-lpassaudiocc?

>                 };
>
>                 lpass_aon: clock-controller@3380000 {
> @@ -2191,13 +2192,13 @@
>                         reg = <0 0x03380000 0 0x30000>;
>                         clocks = <&rpmhcc RPMH_CXO_CLK>,
>                                <&rpmhcc RPMH_CXO_CLK_A>,
> -                              <&lpasscore LPASS_CORE_CC_CORE_CLK>;
> +                              <&lpass_core LPASS_CORE_CC_CORE_CLK>;

Is this really necessary?

>                         clock-names = "bi_tcxo", "bi_tcxo_ao", "iface";
>                         #clock-cells = <1>;
>                         #power-domain-cells = <1>;
>                 };
>
> -               lpasscore: clock-controller@3900000 {
> +               lpass_core: clock-controller@3900000 {

Is this really necessary?

>                         compatible = "qcom,sc7280-lpasscorecc";
>                         reg = <0 0x03900000 0 0x50000>;
>                         clocks = <&rpmhcc RPMH_CXO_CLK>;

Re: [PATCH V3 2/2] arm64: dts: qcom: sc7280: Update lpassaudio clock controller for resets

[Satya Priya Kakitapalli (Temp)]

On 7/27/2022 6:52 AM, Stephen Boyd wrote:
> Quoting Satya Priya (2022-07-20 04:22:24)
>> From: Taniya Das <quic_tdas@quicinc.com>
>>
>> The lpass audio supports TX/RX/WSA block resets. Also to keep
>> consistency update lpasscore to lpass_core.
> Consistency with what?


Hi Stephen,


We got a comment to change this on previous posts, to keep consistency 
with the other nodes like lpass_aon etc


https://patchwork.kernel.org/project/linux-arm-msm/patch/20220503113246.13857-1-quic_tdas@quicinc.com/#24842497

>> Fixes: 9499240d15f2 ("arm64: dts: qcom: sc7280: Add lpasscore & lpassaudio clock controllers")
>> Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
>> Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
>> ---
>> Changes since v3:
>>   - Remove the status="disabled" from lpasscc node.
>>
>>   arch/arm64/boot/dts/qcom/sc7280.dtsi | 5 +++--
>>   1 file changed, 3 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> index 71735bb..c641f0b 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> @@ -2184,6 +2184,7 @@
>>                          power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
>>                          #clock-cells = <1>;
>>                          #power-domain-cells = <1>;
>> +                       #reset-cells = <1>;
> Is there a binding update for qcom,sc7280-lpassaudiocc?
>
>>                  };
>>
>>                  lpass_aon: clock-controller@3380000 {
>> @@ -2191,13 +2192,13 @@
>>                          reg = <0 0x03380000 0 0x30000>;
>>                          clocks = <&rpmhcc RPMH_CXO_CLK>,
>>                                 <&rpmhcc RPMH_CXO_CLK_A>,
>> -                              <&lpasscore LPASS_CORE_CC_CORE_CLK>;
>> +                              <&lpass_core LPASS_CORE_CC_CORE_CLK>;
> Is this really necessary?
>
>>                          clock-names = "bi_tcxo", "bi_tcxo_ao", "iface";
>>                          #clock-cells = <1>;
>>                          #power-domain-cells = <1>;
>>                  };
>>
>> -               lpasscore: clock-controller@3900000 {
>> +               lpass_core: clock-controller@3900000 {
> Is this really necessary?
>
>>                          compatible = "qcom,sc7280-lpasscorecc";
>>                          reg = <0 0x03900000 0 0x50000>;
>>                          clocks = <&rpmhcc RPMH_CXO_CLK>;

Re: [PATCH V3 2/2] arm64: dts: qcom: sc7280: Update lpassaudio clock controller for resets

[Stephen Boyd]

Quoting Satya Priya Kakitapalli (Temp) (2022-07-26 22:51:08)
>
> On 7/27/2022 6:52 AM, Stephen Boyd wrote:
> > Quoting Satya Priya (2022-07-20 04:22:24)
> >> From: Taniya Das <quic_tdas@quicinc.com>
> >>
> >> The lpass audio supports TX/RX/WSA block resets. Also to keep
> >> consistency update lpasscore to lpass_core.
> > Consistency with what?
>
>
> Hi Stephen,
>
>
> We got a comment to change this on previous posts, to keep consistency
> with the other nodes like lpass_aon etc

Can you make that change in a different patch? Then the focus can be on
what the patch subject is about. You're not changing the same lines,
right?

Re: [PATCH V3 2/2] arm64: dts: qcom: sc7280: Update lpassaudio clock controller for resets

[Satya Priya Kakitapalli (Temp)]

On 8/9/2022 5:43 AM, Stephen Boyd wrote:
> Quoting Satya Priya Kakitapalli (Temp) (2022-07-26 22:51:08)
>> On 7/27/2022 6:52 AM, Stephen Boyd wrote:
>>> Quoting Satya Priya (2022-07-20 04:22:24)
>>>> From: Taniya Das <quic_tdas@quicinc.com>
>>>>
>>>> The lpass audio supports TX/RX/WSA block resets. Also to keep
>>>> consistency update lpasscore to lpass_core.
>>> Consistency with what?
>>
>> Hi Stephen,
>>
>>
>> We got a comment to change this on previous posts, to keep consistency
>> with the other nodes like lpass_aon etc
> Can you make that change in a different patch? Then the focus can be on
> what the patch subject is about. You're not changing the same lines,
> right?


No, I will move this change to separate patch.