From mboxrd@z Thu Jan 1 00:00:00 1970 From: Evan Green Subject: Re: [PATCH 05/13] memory: mtk-smi: Add device-link between smi-larb and smi-common Date: Mon, 25 Feb 2019 15:54:50 -0800 Message-ID: References: <1546318276-18993-1-git-send-email-yong.wu@mediatek.com> <1546318276-18993-6-git-send-email-yong.wu@mediatek.com> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Return-path: In-Reply-To: <1546318276-18993-6-git-send-email-yong.wu@mediatek.com> Sender: linux-kernel-owner@vger.kernel.org To: Yong Wu Cc: Joerg Roedel , Greg Kroah-Hartman , Matthias Brugger , Rob Herring , Robin Murphy , Tomasz Figa , Will Deacon , linux-mediatek@lists.infradead.org, srv_heupstream@mediatek.com, "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" , LKML , linux-arm-kernel@lists.infradead.org, iommu@lists.linux-foundation.org, Arnd Bergmann , yingjoe.chen@mediatek.com, youlin.pei@mediatek.com, Nicolas Boichat List-Id: devicetree@vger.kernel.org On Mon, Dec 31, 2018 at 8:52 PM Yong Wu wrote: > > Normally, If the smi-larb HW need work, we should enable the smi-common > HW power and clock firstly. > This patch adds device-link between the smi-larb dev and the smi-common > dev. then If pm_runtime_get_sync(smi-larb-dev), the pm_runtime_get_sync > (smi-common-dev) will be called automatically. > > Since smi is built-in driver like IOMMU and never unbound, > DL_FLAG_AUTOREMOVE_* is not needed. > > CC: Matthias Brugger > Suggested-by: Tomasz Figa > Signed-off-by: Yong Wu > --- > drivers/memory/mtk-smi.c | 16 +++++++--------- > 1 file changed, 7 insertions(+), 9 deletions(-) > > diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c > index 9688341..30930e4 100644 > --- a/drivers/memory/mtk-smi.c > +++ b/drivers/memory/mtk-smi.c > @@ -271,6 +271,7 @@ static int mtk_smi_larb_probe(struct platform_device *pdev) > struct device *dev = &pdev->dev; > struct device_node *smi_node; > struct platform_device *smi_pdev; > + struct device_link *link; > > larb = devm_kzalloc(dev, sizeof(*larb), GFP_KERNEL); > if (!larb) > @@ -310,6 +311,12 @@ static int mtk_smi_larb_probe(struct platform_device *pdev) > if (!platform_get_drvdata(smi_pdev)) > return -EPROBE_DEFER; > larb->smi_common_dev = &smi_pdev->dev; > + link = device_link_add(dev, larb->smi_common_dev, > + DL_FLAG_PM_RUNTIME); Doesn't this need to be torn down in remove()? You mention that it's built-in and never removed, but it does seem to have a remove() function that tears down everything else, so it seemed a shame to start leaking now. Maybe the AUTOREMOVE flag would do it.