From mboxrd@z Thu Jan 1 00:00:00 1970 From: Code Kipper Subject: Re: Re: [PATCH 5/5] ARM: dts: sun6i: Add dts file for CSQ CS908 board Date: Mon, 15 Dec 2014 11:21:37 +0100 Message-ID: References: <1416747283-13489-1-git-send-email-hdegoede@redhat.com> <1416747283-13489-6-git-send-email-hdegoede@redhat.com> <20141125182147.GD25249@lukather> <5475962A.4090508@redhat.com> Reply-To: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org Mime-Version: 1.0 Content-Type: multipart/alternative; boundary=047d7b3a84c08b8f29050a3e9b1c Return-path: In-Reply-To: <5475962A.4090508-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: linux-sunxi , Hans de Goede Cc: Maxime Ripard , Chen-Yu Tsai , devicetree List-Id: devicetree@vger.kernel.org --047d7b3a84c08b8f29050a3e9b1c Content-Type: text/plain; charset=UTF-8 > > usb0 (otg): usb-a receptacle 1 (labeled 1 on the box, 0 on the print) > usb1 (ehci): routed to internal wifi > usb2 (ehci): usb-a receptacle 2 (labeled 2 on both the box and the print) > > I'm using fel mode with an usb-a <-> usb-a cable connected to usb0 on > the cs908. The cs908 has no fel button, so I've hooked up the serial > console, > and then keep 2 pressed on the serial console while inserting the usb-a > into > the PC (which will also power the board). boot0 from the nand will then > jump > into fel mode when it sees the 2 keypress. > Hi Hans, I'm looking to try this on my vidon box which like the cs908 doesn't have OTG or a fel button. Just would like to confirm the wiring on the usb-a 2 usb-a male cable. Are they connected one to one i.e. 5v <-> 5v, D+ <-> D+ etc or are the data lines twisted. i.e. D+ <-> D- and vice versa?. Good work with the A31 and A23 deliveries. Thanks, CK > > This was an interesting exercise to confirm that everything on the A31s > just > works with A31 code, but now that is confirms A31s devices are not all that > interesting anymore :) > > I wonder wether to put URL in the commit log is the right thing >> though. It's most likely to be dead in a very near future. The cover >> letter would be a better fit for that. >> > > Ok, I'll drop it from the commit message. > > Regards, > > Hans > > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org For more options, visit https://groups.google.com/d/optout. --047d7b3a84c08b8f29050a3e9b1c Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable


usb0 (otg): usb-a receptacle 1 (labeled 1 on the box, 0 on the print)
usb1 (ehci): routed to internal wifi
usb2 (ehci): usb-a receptacle 2 (labeled 2 on both the box and the print)
I'm using fel mode with an usb-a <-> usb-a cable connected to usb= 0 on
the cs908. The cs908 has no fel button, so I've hooked up the serial co= nsole,
and then keep 2 pressed on the serial console while inserting the usb-a int= o
the PC (which will also power the board). boot0 from the nand will then jum= p
into fel mode when it sees the 2 keypress.

Hi Hans= ,

I'm looking to try this on my vidon box which like the cs908 d= oesn't have OTG
or a fel button. Just would like to confirm the wir= ing on the usb-a 2 usb-a male
cable. Are they connected one = to one i.e. 5v <-> 5v, D+ <-> D+ etc or are the
d= ata lines twisted. i.e. D+ <-> D- and vice versa?.

= Good work with the A31 and A23 deliveries.
Thanks,
<= div>CK
=C2=A0

This was an interesting exercise to confirm that everything on the A31s jus= t
works with A31 code, but now that is confirms A31s devices are not all that=
interesting anymore :)

I wonder wether to put URL in the commit log is the right thing
though. It's most likely to be dead in a very near future. The cover letter would be a better fit for that.

 Ok, I'll drop it from the commit message.

Regards,

Hans

--
You received this message because you are subscribed to the Google Groups &= quot;linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an e= mail to linux-s= unxi+unsubscribe-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org.
For more options, visit http= s://groups.google.com/d/optout.
--047d7b3a84c08b8f29050a3e9b1c--