From: Bjorn Helgaas <bhelgaas-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
To: Murali Karicheri <m-karicheri2-l0cyMroinI0@public.gmane.org>
Cc: "devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>,
"linux-pci-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-pci-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>,
"linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"open list:INTEL IOMMU (VT-d)"
<iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Grant Likely
<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
linux-arm
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Subject: Re: [PATCH v4 4/6] of/pci: add of_pci_dma_configure() update dma configuration
Date: Mon, 26 Jan 2015 17:59:58 -0600 [thread overview]
Message-ID: <CAErSpo4w0zVCmXk2D2Qk5W3kceS9Wk+=jqHBDwk6HUXWwXdq_Q@mail.gmail.com> (raw)
In-Reply-To: <54C6CCF3.7080308-l0cyMroinI0@public.gmane.org>
On Mon, Jan 26, 2015 at 5:25 PM, Murali Karicheri <m-karicheri2-l0cyMroinI0@public.gmane.org> wrote:
> On 01/23/2015 06:41 PM, Bjorn Helgaas wrote:
>>
>> On Fri, Jan 23, 2015 at 05:32:37PM -0500, Murali Karicheri wrote:
>>>
>>> Add of_pci_dma_configure() to allow updating the dma configuration
>>> of the pci device using the configuration from DT of the parent of
>>> the root bridge device.
>>>
>>> Cc: Joerg Roedel<joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
>>> Cc: Grant Likely<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>>> Cc: Rob Herring<robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
>>> Cc: Bjorn Helgaas<bhelgaas-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
>>> Cc: Will Deacon<will.deacon-5wv7dgnIgG8@public.gmane.org>
>>> Cc: Russell King<linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>
>>> Cc: Arnd Bergmann<arnd-r2nGTMty4D4@public.gmane.org>
>>> Cc: Suravee Suthikulpanit<Suravee.Suthikulpanit-5C7GfCeVMHo@public.gmane.org>
>>>
>>> Signed-off-by: Murali Karicheri<m-karicheri2-l0cyMroinI0@public.gmane.org>
>>> ---
>>> drivers/of/of_pci.c | 39 +++++++++++++++++++++++++++++++++++++++
>>> include/linux/of_pci.h | 12 ++++++++++++
>>> 2 files changed, 51 insertions(+)
>>>
>>> diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
>>> index 88471d3..34878c9 100644
>>> --- a/drivers/of/of_pci.c
>>> +++ b/drivers/of/of_pci.c
>>> @@ -2,6 +2,7 @@
>>> #include<linux/export.h>
>>> #include<linux/of.h>
>>> #include<linux/of_address.h>
>>> +#include<linux/of_device.h>
>>> #include<linux/of_pci.h>
>>> #include<linux/slab.h>
>>>
>>> @@ -229,6 +230,44 @@ parse_failed:
>>> return err;
>>> }
>>> EXPORT_SYMBOL_GPL(of_pci_get_host_bridge_resources);
>>> +
>>> +/**
>>> + * of_get_pci_root_bridge_parent - get the OF node of the root bridge's
>>> parent
>>> + * @dev: ptr to pci_dev struct of the pci device
>>> + *
>>> + * This function will traverse the bus up to the root bus starting with
>>> + * the child and return the OF node ptr to root bridge device's parent
>>> device.
>>> + */
>>> +struct device_node *of_get_pci_root_bridge_parent(struct pci_dev *dev)
>>
>>
>> I'm not an OF person, but this interface seems like it might be too
>> special-purpose. Maybe it would be enough to add
>> "of_get_pci_root_bridge()", and the caller could do this:
>>
>> struct device *bridge = of_get_pci_root_bridge(dev);
>> struct device_node *parent_np = bridge->parent->of_node;
>>
>> Also, the name "of_get_..." suggests that it increments a refcount, as
>> of_get_parent() does. But you aren't doing anything with the refcount.
>>
>> But I guess an "of_get_pci_root_bridge()" isn't doing anything OF-related,
>> so maybe we should just add a "pci_get_host_bridge(struct pci_dev *)"
>> to PCI instead.
>
>
> Bjorn,
>
> Thanks for the comment.
>
> I think adding pci_get_host_bridge() is a good idea. There is already
> similar function in host-bridge.c. I have added this function re-using
> existing function find_pci_root_bus(). See the incremental diff below after
> this change. Does this look good?
I like the implementation, but I think either we need to take a
reference on the host bridge, or change the name to something like
"pci_find_host_bridge()", because using "_get_" is conventional for
functions that acquire a reference.
Since host bridges are hot-pluggable, at least in theory, I vote for
taking a reference. Then of course, you'd have to add code to drop
the reference when you're finished with it.
Bjorn
> diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
> index 34878c9..77b15b5 100644
> --- a/drivers/of/of_pci.c
> +++ b/drivers/of/of_pci.c
> @@ -232,26 +232,6 @@ parse_failed:
> EXPORT_SYMBOL_GPL(of_pci_get_host_bridge_resources);
>
> /**
> - * of_get_pci_root_bridge_parent - get the OF node of the root bridge's
> parent
> - * @dev: ptr to pci_dev struct of the pci device
> - *
> - * This function will traverse the bus up to the root bus starting with
> - * the child and return the OF node ptr to root bridge device's parent
> device.
> - */
> -struct device_node *of_get_pci_root_bridge_parent(struct pci_dev *dev)
> -{
> - struct pci_bus *bus = dev->bus;
> - struct device *bridge;
> -
> - while (!pci_is_root_bus(bus))
> - bus = bus->parent;
> - bridge = bus->bridge;
> -
> - return bridge->parent->of_node;
> -}
> -EXPORT_SYMBOL_GPL(of_get_pci_root_bridge_parent);
> -
> -/**
> * of_pci_dma_configure - Setup DMA configuration
> * @dev: ptr to pci_dev struct of the pci device
> *
> @@ -261,10 +241,9 @@ EXPORT_SYMBOL_GPL(of_get_pci_root_bridge_parent);
> void of_pci_dma_configure(struct pci_dev *pci_dev)
> {
> struct device *dev = &pci_dev->dev;
> - struct device_node *parent_np;
> + struct device *bridge = pci_get_host_bridge(pci_dev);
>
> - parent_np = of_get_pci_root_bridge_parent(pci_dev);
> - of_dma_configure(dev, parent_np);
> + of_dma_configure(dev, bridge->parent->of_node);
> }
> EXPORT_SYMBOL_GPL(of_pci_dma_configure);
>
> diff --git a/drivers/pci/host-bridge.c b/drivers/pci/host-bridge.c
> index 0e5f3c9..9803aa6 100644
> --- a/drivers/pci/host-bridge.c
> +++ b/drivers/pci/host-bridge.c
> @@ -23,6 +23,13 @@ static struct pci_host_bridge
> *find_pci_host_bridge(struct pci_bus *bus)
> return to_pci_host_bridge(root_bus->bridge);
> }
>
> +struct device *pci_get_host_bridge(struct pci_dev *dev)
> +{
> + struct pci_bus *root_bus = find_pci_root_bus(dev->bus);
> +
> + return root_bus->bridge;
> +}
> +
> void pci_set_host_bridge_release(struct pci_host_bridge *bridge,
> void (*release_fn)(struct pci_host_bridge
> *),
> void *release_data)
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 9603094..5bcdfa6 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -513,6 +513,8 @@ static inline struct pci_dev *pci_upstream_bridge(struct
> pci_dev *dev)
> return dev->bus->self;
> }
>
> +struct device *pci_get_host_bridge(struct pci_dev *dev);
> +
> #ifdef CONFIG_PCI_MSI
> static inline bool pci_dev_msi_enabled(struct pci_dev *pci_dev)
> {
> @@ -1823,6 +1825,7 @@ int pci_vpd_find_tag(const u8 *buf, unsigned int off,
> unsigned int len, u8 rdt);
> int pci_vpd_find_info_keyword(const u8 *buf, unsigned int off,
> unsigned int len, const char *kw);
>
> /* PCI <-> OF binding helpers */
> #ifdef CONFIG_OF
> struct device_node;
>
>
>>
>> Bjorn
>>
>>> +{
>>> + struct pci_bus *bus = dev->bus;
>>> + struct device *bridge;
>>> +
>>> + while (!pci_is_root_bus(bus))
>>> + bus = bus->parent;
>>> + bridge = bus->bridge;
>>> +
>>> + return bridge->parent->of_node;
>>> +}
>>> +EXPORT_SYMBOL_GPL(of_get_pci_root_bridge_parent);
>>> +
>>> +/**
>>> + * of_pci_dma_configure - Setup DMA configuration
>>> + * @dev: ptr to pci_dev struct of the pci device
>>> + *
>>> + * Function to update PCI devices's DMA configuration using the same
>>> + * info from the OF node of root host bridge's parent.
>>> + */
>>> +void of_pci_dma_configure(struct pci_dev *pci_dev)
>>> +{
>>> + struct device *dev =&pci_dev->dev;
>>>
>>> + struct device_node *parent_np;
>>> +
>>> + parent_np = of_get_pci_root_bridge_parent(pci_dev);
>>> + of_dma_configure(dev, parent_np);
>>> +}
>>> +EXPORT_SYMBOL_GPL(of_pci_dma_configure);
>>> +
>>> #endif /* CONFIG_OF_ADDRESS */
>>>
>>> #ifdef CONFIG_PCI_MSI
>>> diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h
>>> index ce0e5ab..0465a2a 100644
>>> --- a/include/linux/of_pci.h
>>> +++ b/include/linux/of_pci.h
>>> @@ -16,6 +16,8 @@ int of_pci_get_devfn(struct device_node *np);
>>> int of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8
>>> pin);
>>> int of_pci_parse_bus_range(struct device_node *node, struct resource
>>> *res);
>>> int of_get_pci_domain_nr(struct device_node *node);
>>> +struct device_node *of_get_pci_root_bridge_parent(struct pci_dev *dev);
>>> +void of_pci_dma_configure(struct pci_dev *pci_dev);
>>> #else
>>> static inline int of_irq_parse_pci(const struct pci_dev *pdev, struct
>>> of_phandle_args *out_irq)
>>> {
>>> @@ -50,6 +52,16 @@ of_get_pci_domain_nr(struct device_node *node)
>>> {
>>> return -1;
>>> }
>>> +
>>> +static inline struct device_node
>>> +*of_get_pci_root_bridge_parent(struct pci_dev *dev)
>>> +{
>>> + return NULL;
>>> +}
>>> +
>>> +static inline void of_pci_dma_configure(struct pci_dev *pci_dev)
>>> +{
>>> +}
>>> #endif
>>>
>>> #if defined(CONFIG_OF_ADDRESS)
>>> --
>>> 1.7.9.5
>>>
>
>
> --
> Murali Karicheri
> Linux Kernel, Texas Instruments
next prev parent reply other threads:[~2015-01-26 23:59 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-23 22:32 [PATCH v4 0/6] PCI: get DMA configuration from parent device Murali Karicheri
[not found] ` <1422052359-12384-1-git-send-email-m-karicheri2-l0cyMroinI0@public.gmane.org>
2015-01-23 22:32 ` [PATCH v4 1/6] of: iommu: add ptr to OF node arg to of_iommu_configure() Murali Karicheri
[not found] ` <1422052359-12384-2-git-send-email-m-karicheri2-l0cyMroinI0@public.gmane.org>
2015-01-25 13:32 ` Laurent Pinchart
2015-01-26 18:49 ` Murali Karicheri
[not found] ` <54C68C1D.5030605-l0cyMroinI0@public.gmane.org>
2015-01-28 11:33 ` Will Deacon
[not found] ` <20150128113300.GF1569-5wv7dgnIgG8@public.gmane.org>
2015-01-28 12:23 ` Laurent Pinchart
2015-01-28 12:29 ` Will Deacon
[not found] ` <20150128122941.GK1569-5wv7dgnIgG8@public.gmane.org>
2015-01-28 13:15 ` Laurent Pinchart
2015-01-28 13:32 ` Will Deacon
[not found] ` <20150128133219.GM1569-5wv7dgnIgG8@public.gmane.org>
2015-01-28 15:21 ` Murali Karicheri
2015-01-28 23:32 ` Laurent Pinchart
2015-01-29 14:59 ` Murali Karicheri
2015-01-29 16:49 ` Rob Herring
[not found] ` <CAL_Jsq+rzwk0Rw5RRKf9oLqXNFFgnJb4UQ_AzpJLxN1Z0rJWMQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-01-30 0:24 ` Laurent Pinchart
2015-01-30 15:23 ` Murali Karicheri
2015-01-23 22:32 ` [PATCH v4 2/6] of: move of_dma_configure() to device.c to help re-use Murali Karicheri
2015-01-23 22:32 ` [PATCH v4 4/6] of/pci: add of_pci_dma_configure() update dma configuration Murali Karicheri
[not found] ` <1422052359-12384-5-git-send-email-m-karicheri2-l0cyMroinI0@public.gmane.org>
2015-01-23 23:41 ` Bjorn Helgaas
[not found] ` <20150123234124.GW29776-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
2015-01-26 23:25 ` Murali Karicheri
[not found] ` <54C6CCF3.7080308-l0cyMroinI0@public.gmane.org>
2015-01-26 23:59 ` Bjorn Helgaas [this message]
[not found] ` <CAErSpo4w0zVCmXk2D2Qk5W3kceS9Wk+=jqHBDwk6HUXWwXdq_Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-01-27 18:14 ` Murali Karicheri
[not found] ` <54C7D576.6030502-l0cyMroinI0@public.gmane.org>
2015-01-27 18:42 ` Bjorn Helgaas
[not found] ` <CAErSpo4Awgqu0ZtoMm0XSZzhnYtXh3xxH2OJMkyth5YDR9GUiA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-01-27 18:45 ` Murali Karicheri
2015-01-23 22:32 ` [PATCH v4 5/6] PCI: update dma configuration from DT Murali Karicheri
[not found] ` <1422052359-12384-6-git-send-email-m-karicheri2-l0cyMroinI0@public.gmane.org>
2015-01-23 23:27 ` Bjorn Helgaas
[not found] ` <20150123232725.GV29776-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
2015-01-26 23:28 ` Murali Karicheri
2015-01-23 22:32 ` [PATCH v4 3/6] of: fix size when dma-range is not used Murali Karicheri
2015-01-27 11:27 ` Robin Murphy
2015-01-27 15:44 ` Murali Karicheri
[not found] ` <54C77616.80301-5wv7dgnIgG8@public.gmane.org>
2015-01-27 18:55 ` Murali Karicheri
[not found] ` <54C7DF13.20402-l0cyMroinI0@public.gmane.org>
2015-01-28 11:05 ` Catalin Marinas
[not found] ` <20150128110523.GC6646-M2fw3Uu6cmfZROr8t4l/smS4ubULX0JqMm0uRHvK7Nw@public.gmane.org>
2015-01-28 15:45 ` Rob Herring
[not found] ` <CAL_JsqJiCKW0ny=_ueq=A7RH3octpEhN+KZuLZhbNEHusyjcig-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-01-28 17:23 ` Catalin Marinas
2015-01-28 17:34 ` Murali Karicheri
2015-01-28 15:55 ` Robin Murphy
[not found] ` <54C9068D.8050701-5wv7dgnIgG8@public.gmane.org>
2015-01-28 17:30 ` Catalin Marinas
2015-01-30 18:06 ` Murali Karicheri
[not found] ` <54CBC823.3020905-l0cyMroinI0@public.gmane.org>
2015-02-02 12:18 ` Catalin Marinas
[not found] ` <20150202121843.GD22661-M2fw3Uu6cmfZROr8t4l/smS4ubULX0JqMm0uRHvK7Nw@public.gmane.org>
2015-02-02 16:10 ` Murali Karicheri
2015-02-05 21:42 ` Murali Karicheri
[not found] ` <54D3E3C3.1040104-l0cyMroinI0@public.gmane.org>
2015-02-05 22:44 ` Catalin Marinas
2015-01-23 22:32 ` [PATCH v4 6/6] arm: dma-mapping: updates to limit dma_mask and iommu mapping size Murali Karicheri
[not found] ` <1422052359-12384-7-git-send-email-m-karicheri2-l0cyMroinI0@public.gmane.org>
2015-01-27 11:12 ` Robin Murphy
[not found] ` <54C772A0.2000203-5wv7dgnIgG8@public.gmane.org>
2015-01-27 11:34 ` Catalin Marinas
[not found] ` <20150127113416.GB3226-M2fw3Uu6cmfZROr8t4l/smS4ubULX0JqMm0uRHvK7Nw@public.gmane.org>
2015-01-27 15:19 ` Murali Karicheri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAErSpo4w0zVCmXk2D2Qk5W3kceS9Wk+=jqHBDwk6HUXWwXdq_Q@mail.gmail.com' \
--to=bhelgaas-hpiqsd4aklfqt0dzr+alfa@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=linux-pci-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=m-karicheri2-l0cyMroinI0@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).