From: Heiko Thiery <heiko.thiery@gmail.com>
To: Michael Walle <michael@walle.cc>
Cc: Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
Shawn Guo <shawnguo@kernel.org>
Subject: Re: [PATCH v2 1/2] arm64: dts: imx8mn-evk: use proper names for PMIC outputs
Date: Thu, 24 Feb 2022 13:10:52 +0100 [thread overview]
Message-ID: <CAEyMn7ZqypVn14dEa8eWWuUthRqwHqXg35X6hhFE9v7vRkCTxA@mail.gmail.com> (raw)
In-Reply-To: <20220224103030.2040048-1-michael@walle.cc>
HI,
Am Do., 24. Feb. 2022 um 11:30 Uhr schrieb Michael Walle <michael@walle.cc>:
>
> Use the power signal names as given in the schematics of the reference
> board.
>
> Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
> ---
> Changes since v1:
> - swap buck1 and buck2
>
> arch/arm64/boot/dts/freescale/imx8mn-evk.dts | 20 ++++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
> index b4225cfcb6d9..2b685c0c7eeb 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
> @@ -41,7 +41,7 @@ pmic: pmic@25 {
>
> regulators {
> buck1: BUCK1{
> - regulator-name = "BUCK1";
> + regulator-name = "VDD_SOC";
> regulator-min-microvolt = <600000>;
> regulator-max-microvolt = <2187500>;
> regulator-boot-on;
> @@ -50,7 +50,7 @@ buck1: BUCK1{
> };
>
> buck2: BUCK2 {
> - regulator-name = "BUCK2";
> + regulator-name = "VDD_ARM_0V9";
> regulator-min-microvolt = <600000>;
> regulator-max-microvolt = <2187500>;
> regulator-boot-on;
> @@ -61,7 +61,7 @@ buck2: BUCK2 {
> };
>
> buck4: BUCK4{
> - regulator-name = "BUCK4";
> + regulator-name = "VDD_3V3";
> regulator-min-microvolt = <600000>;
> regulator-max-microvolt = <3400000>;
> regulator-boot-on;
> @@ -69,7 +69,7 @@ buck4: BUCK4{
> };
>
> buck5: BUCK5{
> - regulator-name = "BUCK5";
> + regulator-name = "VDD_1V8";
> regulator-min-microvolt = <600000>;
> regulator-max-microvolt = <3400000>;
> regulator-boot-on;
> @@ -77,7 +77,7 @@ buck5: BUCK5{
> };
>
> buck6: BUCK6 {
> - regulator-name = "BUCK6";
> + regulator-name = "NVCC_DRAM_1V1";
> regulator-min-microvolt = <600000>;
> regulator-max-microvolt = <3400000>;
> regulator-boot-on;
> @@ -85,7 +85,7 @@ buck6: BUCK6 {
> };
>
> ldo1: LDO1 {
> - regulator-name = "LDO1";
> + regulator-name = "NVCC_SNVS_1V8";
> regulator-min-microvolt = <1600000>;
> regulator-max-microvolt = <3300000>;
> regulator-boot-on;
> @@ -93,7 +93,7 @@ ldo1: LDO1 {
> };
>
> ldo2: LDO2 {
> - regulator-name = "LDO2";
> + regulator-name = "VDD_SNVS_0V8";
> regulator-min-microvolt = <800000>;
> regulator-max-microvolt = <1150000>;
> regulator-boot-on;
> @@ -101,7 +101,7 @@ ldo2: LDO2 {
> };
>
> ldo3: LDO3 {
> - regulator-name = "LDO3";
> + regulator-name = "VDDA_1V8";
> regulator-min-microvolt = <800000>;
> regulator-max-microvolt = <3300000>;
> regulator-boot-on;
> @@ -109,7 +109,7 @@ ldo3: LDO3 {
> };
>
> ldo4: LDO4 {
> - regulator-name = "LDO4";
> + regulator-name = "VDD_PHY_1V2";
> regulator-min-microvolt = <800000>;
> regulator-max-microvolt = <3300000>;
> regulator-boot-on;
> @@ -117,7 +117,7 @@ ldo4: LDO4 {
> };
>
> ldo5: LDO5 {
> - regulator-name = "LDO5";
> + regulator-name = "NVCC_SD2";
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <3300000>;
> regulator-boot-on;
> --
> 2.30.2
>
next prev parent reply other threads:[~2022-02-24 12:11 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-24 10:30 [PATCH v2 1/2] arm64: dts: imx8mn-evk: use proper names for PMIC outputs Michael Walle
2022-02-24 10:30 ` [PATCH v2 2/2] arm64: dts: imx8mn-evk: fix the min/max voltages of the PMIC Michael Walle
2022-02-24 12:09 ` Heiko Thiery
2022-02-24 12:10 ` Heiko Thiery [this message]
2022-02-26 12:58 ` [PATCH v2 1/2] arm64: dts: imx8mn-evk: use proper names for PMIC outputs Fabio Estevam
2022-03-14 7:30 ` Michael Walle
2022-04-06 13:20 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAEyMn7ZqypVn14dEa8eWWuUthRqwHqXg35X6hhFE9v7vRkCTxA@mail.gmail.com \
--to=heiko.thiery@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=michael@walle.cc \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).