Re: [PATCH V2 1/7] dt-bindings:iio:adc: add sprd,ump9620-adc dtbindings

[Cixi Geng <gengcixi@gmail.com>]

Krzysztof Kozlowski <krzk@kernel.org> 于2022年3月20日周日 22:50写道：
>
> On 11/03/2022 17:46, Cixi Geng wrote:
> > From: Cixi Geng <cixi.geng1@unisoc.com>
> >
> > sprd,ump9620-adc is one variant of sc27xx series, add ump9620 in
> > dtbindings.
> >
> > Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
> > Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
> > ---
> >  .../bindings/iio/adc/sprd,sc2720-adc.yaml     | 30 +++++++++++++++++--
> >  1 file changed, 27 insertions(+), 3 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml b/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
> > index caa3ee0b4b8c..331b08fb1761 100644
> > --- a/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
> > +++ b/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
> > @@ -20,6 +20,7 @@ properties:
> >        - sprd,sc2723-adc
> >        - sprd,sc2730-adc
> >        - sprd,sc2731-adc
> > +      - sprd,ump9620-adc
> >
> >    reg:
> >      maxItems: 1
> > @@ -37,9 +38,32 @@ properties:
> >      maxItems: 2
> >
> >    nvmem-cell-names:
> > -    items:
> > -      - const: big_scale_calib
> > -      - const: small_scale_calib
>
> Please test your changes with dt_binding_check and dtbs_check. Your
> change looks not complete - you have still nvmem-cells = 2.
>
Hi Krzysztof
I test all is PASS on my local.  could you tell how did you test?
my_logs:
cixi.geng1@tj10039pcu:~/upsteatming/linux$ make DT_CHECKER_FLAGS=-m
dt_binding_check &>dt_check.log
cixi.geng1@tj10039pcu:~/upsteatming/linux$ cat dt_check.log |grep sprd,sc2720
  DTEX    Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.example.dts
  DTC     Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.example.dt.yaml
  CHECK   Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.example.dt.yaml
cixi.geng1@tj10039pcu:~/upsteatming/linux$ tuxmake -C ${kernel_src} -b
${topdir}/obj/gcc -o ${topdir}/dist/gcc -a $ARCH -t gcc  -K
CONFIG_ARCH_${PLAT}=y -K CONFIG_MFD_SC27XX_PMIC=y -K
CONFIG_SC27XX_ADC=y

I: config: PASS in 0:00:00.000549
I: default: PASS in 0:10:20.931602
I: kernel: PASS in 0:01:10.643458
I: xipkernel: SKIP in 0:00:00.003244
I: modules: PASS in 0:00:35.658938
I: dtbs: PASS in 0:00:18.696416
I: dtbs-legacy: SKIP in 0:00:00.005625
I: debugkernel: PASS in 0:00:11.541855
I: headers: PASS in 0:00:11.778253
I: build output in /home/cixi.geng1/upsteatming/dist/gcc


>
> Best regards,
> Krzysztof