devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: Anand Moon <linux.amoon@gmail.com>
Cc: devicetree@vger.kernel.org,
	Neil Armstrong <narmstrong@baylibre.com>,
	Kevin Hilman <khilman@baylibre.com>,
	linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	linux-amlogic@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	Jerome Brunet <jbrunet@baylibre.com>
Subject: Re: [PATCHv1 2/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to VDDIO_AO3V3 regulator
Date: Sun, 1 Sep 2019 13:41:17 +0200	[thread overview]
Message-ID: <CAFBinCBA-sQcshd9iAVn=ZDBKkDN3OgJs-WjKEhVLw===b0AdQ@mail.gmail.com> (raw)
In-Reply-To: <20190828202723.1145-3-linux.amoon@gmail.com>

On Wed, Aug 28, 2019 at 10:27 PM Anand Moon <linux.amoon@gmail.com> wrote:
>
> As per shematics TFLASH_VDD, TF_IO, VCC3V3 fixed regulator output which
typo: "schematics"

> is supplied by VDDIO_AO3V3.
please add a short sentence to the description (since you probably
have to re-send a v2) like:
"While here, move the comment name with the signal name in the
schematics above the gpio property to make it consistent with other
regulators"

> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Cc: Jerome Brunet <jbrunet@baylibre.com>
> Cc: Neil Armstrong <narmstrong@baylibre.com>
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
with the patch rebased (see below) and the two issues from above addressed:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

> ---
>  arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 13 ++++++++++---
>  1 file changed, 10 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> index 98e742bf44c1..a078a1ee5004 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> @@ -67,17 +67,19 @@
>         };
>
>         tflash_vdd: regulator-tflash_vdd {
> -               /*
> -                * signal name from schematics: TFLASH_VDD_EN
> -                */
>                 compatible = "regulator-fixed";
>
>                 regulator-name = "TFLASH_VDD";
>                 regulator-min-microvolt = <3300000>;
>                 regulator-max-microvolt = <3300000>;
>
> +               /*
> +                * signal name from schematics: TFLASH_VDD_EN
> +                */
>                 gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
>                 enable-active-high;
> +               /* U16 RT9179GB */
> +               vin-supply = <&vddio_ao3v3>;
>         };
>
>         tf_io: gpio-regulator-tf_io {
> @@ -95,6 +97,8 @@
>
>                 states = <3300000 0
>                           1800000 1>;
> +               /* U12/U13 RT9179GB */
> +               vin-supply = <&vddio_ao3v3>;
>         };
thank you for the patch but I think it won't apply on top of Neil's
"arm64: dts: meson: fix boards regulators states format" (which was
applied just after you sent this series)


Martin

  reply	other threads:[~2019-09-01 11:41 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-28 20:27 [PATCHv1 0/3] Odroid c2 missing regulator linking Anand Moon
2019-08-28 20:27 ` [PATCHv1 1/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0 regulator Anand Moon
2019-09-01 11:37   ` Martin Blumenstingl
2019-09-01 13:57     ` Anand Moon
2019-09-01 21:53       ` Martin Blumenstingl
2019-09-02  1:18         ` Anand Moon
2019-09-03  6:07   ` kbuild test robot
2019-08-28 20:27 ` [PATCHv1 2/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to VDDIO_AO3V3 regulator Anand Moon
2019-09-01 11:41   ` Martin Blumenstingl [this message]
2019-09-01 13:56     ` Anand Moon
2019-08-28 20:27 ` [PATCHv1 3/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI supply Anand Moon
2019-09-01 11:44   ` Martin Blumenstingl
2019-09-01 13:58     ` Anand Moon
2019-08-29  8:28 ` [PATCHv1 0/3] Odroid c2 missing regulator linking Neil Armstrong
2019-08-29 18:35   ` Anand Moon
2019-08-30  7:31     ` Neil Armstrong
2019-08-30  9:34       ` Anand Moon
2019-08-30  9:50         ` Neil Armstrong
2019-09-03 19:07         ` Martin Blumenstingl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAFBinCBA-sQcshd9iAVn=ZDBKkDN3OgJs-WjKEhVLw===b0AdQ@mail.gmail.com' \
    --to=martin.blumenstingl@googlemail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux.amoon@gmail.com \
    --cc=narmstrong@baylibre.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).