From mboxrd@z Thu Jan  1 00:00:00 1970
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Subject: Re: [PATCH v2 4/6] arm64: dts: meson: sei510: Add minimal thermal zone
Date: Sat, 3 Aug 2019 20:29:10 +0200
Message-ID: <CAFBinCD-DUEjPgfUEJmHpPjw1ShZy7nemaFBKANmM5M42XBG4Q@mail.gmail.com>
References: <20190731153529.30159-1-glaroque@baylibre.com> <20190731153529.30159-5-glaroque@baylibre.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="UTF-8"
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <20190731153529.30159-5-glaroque@baylibre.com>
Sender: linux-kernel-owner@vger.kernel.org
To: Guillaume La Roque <glaroque@baylibre.com>
Cc: daniel.lezcano@linaro.org, khilman@baylibre.com, devicetree@vger.kernel.org, linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org
List-Id: devicetree@vger.kernel.org

Hi Guillaume,

On Wed, Jul 31, 2019 at 5:36 PM Guillaume La Roque
<glaroque@baylibre.com> wrote:
>
> Add minimal thermal zone for DDR and CPU sensor
so high DDR (controller?) temperatures will throttle Mali and high PLL
temperatures will throttle the CPU?
to get things started I'm fine with this, but I think it should be
mentioned here

> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
> ---
>  .../boot/dts/amlogic/meson-g12a-sei510.dts    | 56 +++++++++++++++++++
>  1 file changed, 56 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
> index 979449968a5f..2c16a2cba0a3 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
> @@ -10,6 +10,7 @@
>  #include <dt-bindings/input/input.h>
>  #include <dt-bindings/gpio/meson-g12a-gpio.h>
>  #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
> +#include <dt-bindings/thermal/thermal.h>
>
>  / {
>         compatible = "seirobotics,sei510", "amlogic,g12a";
> @@ -33,6 +34,53 @@
>                 ethernet0 = &ethmac;
>         };
>
> +       thermal-zones {
> +               cpu-thermal {
> +                       polling-delay = <1000>;
> +                       polling-delay-passive = <100>;
> +                       thermal-sensors = <&cpu_temp>;
> +
> +                       trips {
> +                               cpu_critical: cpu-critical {
> +                                       temperature = <110000>; /* millicelsius */
> +                                       hysteresis = <2000>; /* millicelsius */
> +                                       type = "critical";
> +                               };
> +                       };
> +
> +                       cooling-maps {
> +                               map {
> +                                       trip = <&cpu_critical>;
> +                                       cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +                                                        <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +                                                        <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +                                                        <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +                               };
> +                       };
> +               };
> +
> +               ddr-thermal {
> +                       polling-delay = <1000>;
> +                       polling-delay-passive = <100>;
> +                       thermal-sensors = <&ddr_temp>;
> +
> +                       trips {
> +                               ddr_critical: ddr-critical {
> +                                       temperature = <110000>; /* millicelsius */
> +                                       hysteresis = <2000>; /* millicelsius */
> +                                       type = "critical";
> +                               };
> +                       };
> +
> +                       cooling-maps {
> +                               map {
> +                                       trip = <&ddr_critical>;
> +                                       cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +                               };
> +                       };
> +               };
> +       };
> +
>         mono_dac: audio-codec-0 {
>                 compatible = "maxim,max98357a";
>                 #sound-dai-cells = <0>;
> @@ -321,6 +369,7 @@
>         operating-points-v2 = <&cpu_opp_table>;
>         clocks = <&clkc CLKID_CPU_CLK>;
>         clock-latency = <50000>;
> +       #cooling-cells = <2>;
>  };
>
>  &cpu1 {
> @@ -328,6 +377,7 @@
>         operating-points-v2 = <&cpu_opp_table>;
>         clocks = <&clkc CLKID_CPU_CLK>;
>         clock-latency = <50000>;
> +       #cooling-cells = <2>;
>  };
>
>  &cpu2 {
> @@ -335,6 +385,7 @@
>         operating-points-v2 = <&cpu_opp_table>;
>         clocks = <&clkc CLKID_CPU_CLK>;
>         clock-latency = <50000>;
> +       #cooling-cells = <2>;
>  };
>
>  &cpu3 {
> @@ -342,6 +393,7 @@
>         operating-points-v2 = <&cpu_opp_table>;
>         clocks = <&clkc CLKID_CPU_CLK>;
>         clock-latency = <50000>;
> +       #cooling-cells = <2>;
>  };
>
>  &cvbs_vdac_port {
> @@ -368,6 +420,10 @@
>         status = "okay";
>  };
>
> +&mali {
> +       #cooling-cells = <2>;
> +};
is there something device-specific in this patch? I'm wondering
whether we can move all of this go g12a.dtsi to simplify maintenance
in the future


Martin