From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gabriel Fernandez Subject: Re: [PATCH 3/7] ARM: stih416: Add DT nodes for PWM Date: Wed, 18 Jun 2014 17:08:07 +0200 Message-ID: References: <1403103172-19856-1-git-send-email-lee.jones@linaro.org> <1403103172-19856-3-git-send-email-lee.jones@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Return-path: In-Reply-To: <1403103172-19856-3-git-send-email-lee.jones@linaro.org> Sender: linux-kernel-owner@vger.kernel.org To: Lee Jones Cc: "linux-arm-kernel@lists.infradead.org" , "linux-kernel@vger.kernel.org" , linux-pwm@vger.kernel.org, "kernel@stlinux.com" , "devicetree@vger.kernel.org" , Srinivas Kandagatla , Patrice Chotard , ajitpal.singh@st.com, thierry.reding@gmail.com, Maxime Coquelin List-Id: devicetree@vger.kernel.org Hi Lee, minor remark below.. On 18 June 2014 16:52, Lee Jones wrote: > Supply top level nodes for the STiH416 based development boards. > The Pinctrl configuration has already been applied, so the only > missing piece of the DT puzzle is for a board's DTB to enable > the nodes. > > Signed-off-by: Lee Jones > --- > arch/arm/boot/dts/stih416.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 40 insertions(+) > > diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi > index 06473c5..8af159e 100644 > --- a/arch/arm/boot/dts/stih416.dtsi > +++ b/arch/arm/boot/dts/stih416.dtsi > @@ -236,5 +236,45 @@ > resets = <&powerdown STIH416_KEYSCAN_POWERDOWN>, > <&softreset STIH416_KEYSCAN_SOFTRESET>; > }; > + > + /* SAS PWM Module */ > + pwm0: pwm@fed10000 { > + compatible = "st,sti-pwm"; > + status = "disabled"; > + #pwm-cells = <2>; > + reg = <0xfed10000 0x68>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm0_chan0_default del space > + &pinctrl_pwm0_chan1_default > + &pinctrl_pwm0_chan2_default > + &pinctrl_pwm0_chan3_default>; > + > + clock-names = "pwm"; > + clocks = <&clk_sysin>; > + }; > + > + /* SBC PWM Module */ > + pwm1: pwm@fe510000 { > + compatible = "st,sti-pwm"; > + status = "disabled"; > + #pwm-cells = <2>; > + reg = <0xfe510000 0x68>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm1_chan0_default > + /* > + * Shared with SBC_OBS_NOTRST. Don't > + * enable unless you really know what > + * you're doing. > + * > + * &pinctrl_pwm1_chan1_default > + */ > + &pinctrl_pwm1_chan2_default > + &pinctrl_pwm1_chan3_default>; > + > + clock-names = "pwm"; > + clocks = <&clk_sysin>; > + }; > }; > }; > -- > 1.8.3.2 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel