From: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Andrew Bresticker <abrestic-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Cc: Ralf Baechle <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>,
Linux-MIPS <linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>,
"devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Kevin Cernekee <cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: Re: [PATCH 1/2] MIPS: Move device-trees into vendor sub-directories
Date: Tue, 23 Dec 2014 08:07:49 -0800 [thread overview]
Message-ID: <CAGVrzcZPODEbQBF8Z+_r-6H3A_S-4Mi=1ALBf87ZmEngWzDpyw@mail.gmail.com> (raw)
In-Reply-To: <1419290863-19788-1-git-send-email-abrestic-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2014-12-22 15:27 GMT-08:00 Andrew Bresticker <abrestic-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>:
> Move the MIPS device-trees into the appropriate vendor sub-directories.
>
> Signed-off-by: Andrew Bresticker <abrestic-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
> ---
> arch/mips/Makefile | 2 +-
> arch/mips/boot/dts/Makefile | 33 ++++++++--------------
> arch/mips/boot/dts/bcm/Makefile | 9 ++++++
> arch/mips/boot/dts/{ => bcm}/bcm3384.dtsi | 0
> arch/mips/boot/dts/{ => bcm}/bcm93384wvg.dts | 0
Let's use brcm here, which is the DT vendor prefix, or go full name
with broadcom, there has been enough debate in the past about this ;)
Thanks!
> arch/mips/boot/dts/cavium-octeon/Makefile | 9 ++++++
> .../boot/dts/{ => cavium-octeon}/octeon_3xxx.dts | 0
> .../boot/dts/{ => cavium-octeon}/octeon_68xx.dts | 0
> arch/mips/boot/dts/lantiq/Makefile | 9 ++++++
> arch/mips/boot/dts/{ => lantiq}/danube.dtsi | 0
> arch/mips/boot/dts/{ => lantiq}/easy50712.dts | 0
> arch/mips/boot/dts/mti/Makefile | 9 ++++++
> arch/mips/boot/dts/{ => mti}/sead3.dts | 0
> arch/mips/boot/dts/netlogic/Makefile | 12 ++++++++
> arch/mips/boot/dts/{ => netlogic}/xlp_evp.dts | 0
> arch/mips/boot/dts/{ => netlogic}/xlp_fvp.dts | 0
> arch/mips/boot/dts/{ => netlogic}/xlp_gvp.dts | 0
> arch/mips/boot/dts/{ => netlogic}/xlp_svp.dts | 0
> arch/mips/boot/dts/ralink/Makefile | 12 ++++++++
> arch/mips/boot/dts/{ => ralink}/mt7620a.dtsi | 0
> arch/mips/boot/dts/{ => ralink}/mt7620a_eval.dts | 0
> arch/mips/boot/dts/{ => ralink}/rt2880.dtsi | 0
> arch/mips/boot/dts/{ => ralink}/rt2880_eval.dts | 0
> arch/mips/boot/dts/{ => ralink}/rt3050.dtsi | 0
> arch/mips/boot/dts/{ => ralink}/rt3052_eval.dts | 0
> arch/mips/boot/dts/{ => ralink}/rt3883.dtsi | 0
> arch/mips/boot/dts/{ => ralink}/rt3883_eval.dts | 0
> 27 files changed, 73 insertions(+), 22 deletions(-)
> create mode 100644 arch/mips/boot/dts/bcm/Makefile
> rename arch/mips/boot/dts/{ => bcm}/bcm3384.dtsi (100%)
> rename arch/mips/boot/dts/{ => bcm}/bcm93384wvg.dts (100%)
> create mode 100644 arch/mips/boot/dts/cavium-octeon/Makefile
> rename arch/mips/boot/dts/{ => cavium-octeon}/octeon_3xxx.dts (100%)
> rename arch/mips/boot/dts/{ => cavium-octeon}/octeon_68xx.dts (100%)
> create mode 100644 arch/mips/boot/dts/lantiq/Makefile
> rename arch/mips/boot/dts/{ => lantiq}/danube.dtsi (100%)
> rename arch/mips/boot/dts/{ => lantiq}/easy50712.dts (100%)
> create mode 100644 arch/mips/boot/dts/mti/Makefile
> rename arch/mips/boot/dts/{ => mti}/sead3.dts (100%)
> create mode 100644 arch/mips/boot/dts/netlogic/Makefile
> rename arch/mips/boot/dts/{ => netlogic}/xlp_evp.dts (100%)
> rename arch/mips/boot/dts/{ => netlogic}/xlp_fvp.dts (100%)
> rename arch/mips/boot/dts/{ => netlogic}/xlp_gvp.dts (100%)
> rename arch/mips/boot/dts/{ => netlogic}/xlp_svp.dts (100%)
> create mode 100644 arch/mips/boot/dts/ralink/Makefile
> rename arch/mips/boot/dts/{ => ralink}/mt7620a.dtsi (100%)
> rename arch/mips/boot/dts/{ => ralink}/mt7620a_eval.dts (100%)
> rename arch/mips/boot/dts/{ => ralink}/rt2880.dtsi (100%)
> rename arch/mips/boot/dts/{ => ralink}/rt2880_eval.dts (100%)
> rename arch/mips/boot/dts/{ => ralink}/rt3050.dtsi (100%)
> rename arch/mips/boot/dts/{ => ralink}/rt3052_eval.dts (100%)
> rename arch/mips/boot/dts/{ => ralink}/rt3883.dtsi (100%)
> rename arch/mips/boot/dts/{ => ralink}/rt3883_eval.dts (100%)
>
> diff --git a/arch/mips/Makefile b/arch/mips/Makefile
> index 37fce70..9c4b9c8 100644
> --- a/arch/mips/Makefile
> +++ b/arch/mips/Makefile
> @@ -354,7 +354,7 @@ core-$(CONFIG_BUILTIN_DTB) += arch/mips/boot/dts/
>
> PHONY += dtbs
> dtbs: scripts
> - $(Q)$(MAKE) $(build)=arch/mips/boot/dts dtbs
> + $(Q)$(MAKE) $(build)=arch/mips/boot/dts
>
> archprepare:
> ifdef CONFIG_MIPS32_N32
> diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
> index 4f49fa4..90d1fbc 100644
> --- a/arch/mips/boot/dts/Makefile
> +++ b/arch/mips/boot/dts/Makefile
> @@ -1,21 +1,12 @@
> -dtb-$(CONFIG_BCM3384) += bcm93384wvg.dtb
> -dtb-$(CONFIG_CAVIUM_OCTEON_SOC) += octeon_3xxx.dtb octeon_68xx.dtb
> -dtb-$(CONFIG_DT_EASY50712) += easy50712.dtb
> -dtb-$(CONFIG_DT_XLP_EVP) += xlp_evp.dtb
> -dtb-$(CONFIG_DT_XLP_SVP) += xlp_svp.dtb
> -dtb-$(CONFIG_DT_XLP_FVP) += xlp_fvp.dtb
> -dtb-$(CONFIG_DT_XLP_GVP) += xlp_gvp.dtb
> -dtb-$(CONFIG_DTB_RT2880_EVAL) += rt2880_eval.dtb
> -dtb-$(CONFIG_DTB_RT305X_EVAL) += rt3052_eval.dtb
> -dtb-$(CONFIG_DTB_RT3883_EVAL) += rt3883_eval.dtb
> -dtb-$(CONFIG_DTB_MT7620A_EVAL) += mt7620a_eval.dtb
> -dtb-$(CONFIG_MIPS_SEAD3) += sead3.dtb
> -
> -obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
> -
> -targets += dtbs
> -targets += $(dtb-y)
> -
> -dtbs: $(addprefix $(obj)/, $(dtb-y))
> -
> -clean-files += *.dtb *.dtb.S
> +dts-dirs += bcm
> +dts-dirs += cavium-octeon
> +dts-dirs += lantiq
> +dts-dirs += mti
> +dts-dirs += netlogic
> +dts-dirs += ralink
> +
> +obj-y := $(addsuffix /, $(dts-dirs))
> +
> +always := $(dtb-y)
> +subdir-y := $(dts-dirs)
> +clean-files := *.dtb *.dtb.S
> diff --git a/arch/mips/boot/dts/bcm/Makefile b/arch/mips/boot/dts/bcm/Makefile
> new file mode 100644
> index 0000000..a353d4e
> --- /dev/null
> +++ b/arch/mips/boot/dts/bcm/Makefile
> @@ -0,0 +1,9 @@
> +dtb-$(CONFIG_BCM3384) += bcm93384wvg.dtb
> +
> +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
> +
> +# Force kbuild to make empty built-in.o if necessary
> +obj- += dummy.o
> +
> +always := $(dtb-y)
> +clean-files := *.dtb *.dtb.S
> diff --git a/arch/mips/boot/dts/bcm3384.dtsi b/arch/mips/boot/dts/bcm/bcm3384.dtsi
> similarity index 100%
> rename from arch/mips/boot/dts/bcm3384.dtsi
> rename to arch/mips/boot/dts/bcm/bcm3384.dtsi
> diff --git a/arch/mips/boot/dts/bcm93384wvg.dts b/arch/mips/boot/dts/bcm/bcm93384wvg.dts
> similarity index 100%
> rename from arch/mips/boot/dts/bcm93384wvg.dts
> rename to arch/mips/boot/dts/bcm/bcm93384wvg.dts
> diff --git a/arch/mips/boot/dts/cavium-octeon/Makefile b/arch/mips/boot/dts/cavium-octeon/Makefile
> new file mode 100644
> index 0000000..5b99c40
> --- /dev/null
> +++ b/arch/mips/boot/dts/cavium-octeon/Makefile
> @@ -0,0 +1,9 @@
> +dtb-$(CONFIG_CAVIUM_OCTEON_SOC) += octeon_3xxx.dtb octeon_68xx.dtb
> +
> +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
> +
> +# Force kbuild to make empty built-in.o if necessary
> +obj- += dummy.o
> +
> +always := $(dtb-y)
> +clean-files := *.dtb *.dtb.S
> diff --git a/arch/mips/boot/dts/octeon_3xxx.dts b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts
> similarity index 100%
> rename from arch/mips/boot/dts/octeon_3xxx.dts
> rename to arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts
> diff --git a/arch/mips/boot/dts/octeon_68xx.dts b/arch/mips/boot/dts/cavium-octeon/octeon_68xx.dts
> similarity index 100%
> rename from arch/mips/boot/dts/octeon_68xx.dts
> rename to arch/mips/boot/dts/cavium-octeon/octeon_68xx.dts
> diff --git a/arch/mips/boot/dts/lantiq/Makefile b/arch/mips/boot/dts/lantiq/Makefile
> new file mode 100644
> index 0000000..0906c62
> --- /dev/null
> +++ b/arch/mips/boot/dts/lantiq/Makefile
> @@ -0,0 +1,9 @@
> +dtb-$(CONFIG_DT_EASY50712) += easy50712.dtb
> +
> +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
> +
> +# Force kbuild to make empty built-in.o if necessary
> +obj- += dummy.o
> +
> +always := $(dtb-y)
> +clean-files := *.dtb *.dtb.S
> diff --git a/arch/mips/boot/dts/danube.dtsi b/arch/mips/boot/dts/lantiq/danube.dtsi
> similarity index 100%
> rename from arch/mips/boot/dts/danube.dtsi
> rename to arch/mips/boot/dts/lantiq/danube.dtsi
> diff --git a/arch/mips/boot/dts/easy50712.dts b/arch/mips/boot/dts/lantiq/easy50712.dts
> similarity index 100%
> rename from arch/mips/boot/dts/easy50712.dts
> rename to arch/mips/boot/dts/lantiq/easy50712.dts
> diff --git a/arch/mips/boot/dts/mti/Makefile b/arch/mips/boot/dts/mti/Makefile
> new file mode 100644
> index 0000000..ef1f3db
> --- /dev/null
> +++ b/arch/mips/boot/dts/mti/Makefile
> @@ -0,0 +1,9 @@
> +dtb-$(CONFIG_MIPS_SEAD3) += sead3.dtb
> +
> +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
> +
> +# Force kbuild to make empty built-in.o if necessary
> +obj- += dummy.o
> +
> +always := $(dtb-y)
> +clean-files := *.dtb *.dtb.S
> diff --git a/arch/mips/boot/dts/sead3.dts b/arch/mips/boot/dts/mti/sead3.dts
> similarity index 100%
> rename from arch/mips/boot/dts/sead3.dts
> rename to arch/mips/boot/dts/mti/sead3.dts
> diff --git a/arch/mips/boot/dts/netlogic/Makefile b/arch/mips/boot/dts/netlogic/Makefile
> new file mode 100644
> index 0000000..e126cd3
> --- /dev/null
> +++ b/arch/mips/boot/dts/netlogic/Makefile
> @@ -0,0 +1,12 @@
> +dtb-$(CONFIG_DT_XLP_EVP) += xlp_evp.dtb
> +dtb-$(CONFIG_DT_XLP_SVP) += xlp_svp.dtb
> +dtb-$(CONFIG_DT_XLP_FVP) += xlp_fvp.dtb
> +dtb-$(CONFIG_DT_XLP_GVP) += xlp_gvp.dtb
> +
> +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
> +
> +# Force kbuild to make empty built-in.o if necessary
> +obj- += dummy.o
> +
> +always := $(dtb-y)
> +clean-files := *.dtb *.dtb.S
> diff --git a/arch/mips/boot/dts/xlp_evp.dts b/arch/mips/boot/dts/netlogic/xlp_evp.dts
> similarity index 100%
> rename from arch/mips/boot/dts/xlp_evp.dts
> rename to arch/mips/boot/dts/netlogic/xlp_evp.dts
> diff --git a/arch/mips/boot/dts/xlp_fvp.dts b/arch/mips/boot/dts/netlogic/xlp_fvp.dts
> similarity index 100%
> rename from arch/mips/boot/dts/xlp_fvp.dts
> rename to arch/mips/boot/dts/netlogic/xlp_fvp.dts
> diff --git a/arch/mips/boot/dts/xlp_gvp.dts b/arch/mips/boot/dts/netlogic/xlp_gvp.dts
> similarity index 100%
> rename from arch/mips/boot/dts/xlp_gvp.dts
> rename to arch/mips/boot/dts/netlogic/xlp_gvp.dts
> diff --git a/arch/mips/boot/dts/xlp_svp.dts b/arch/mips/boot/dts/netlogic/xlp_svp.dts
> similarity index 100%
> rename from arch/mips/boot/dts/xlp_svp.dts
> rename to arch/mips/boot/dts/netlogic/xlp_svp.dts
> diff --git a/arch/mips/boot/dts/ralink/Makefile b/arch/mips/boot/dts/ralink/Makefile
> new file mode 100644
> index 0000000..2a72259
> --- /dev/null
> +++ b/arch/mips/boot/dts/ralink/Makefile
> @@ -0,0 +1,12 @@
> +dtb-$(CONFIG_DTB_RT2880_EVAL) += rt2880_eval.dtb
> +dtb-$(CONFIG_DTB_RT305X_EVAL) += rt3052_eval.dtb
> +dtb-$(CONFIG_DTB_RT3883_EVAL) += rt3883_eval.dtb
> +dtb-$(CONFIG_DTB_MT7620A_EVAL) += mt7620a_eval.dtb
> +
> +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
> +
> +# Force kbuild to make empty built-in.o if necessary
> +obj- += dummy.o
> +
> +always := $(dtb-y)
> +clean-files := *.dtb *.dtb.S
> diff --git a/arch/mips/boot/dts/mt7620a.dtsi b/arch/mips/boot/dts/ralink/mt7620a.dtsi
> similarity index 100%
> rename from arch/mips/boot/dts/mt7620a.dtsi
> rename to arch/mips/boot/dts/ralink/mt7620a.dtsi
> diff --git a/arch/mips/boot/dts/mt7620a_eval.dts b/arch/mips/boot/dts/ralink/mt7620a_eval.dts
> similarity index 100%
> rename from arch/mips/boot/dts/mt7620a_eval.dts
> rename to arch/mips/boot/dts/ralink/mt7620a_eval.dts
> diff --git a/arch/mips/boot/dts/rt2880.dtsi b/arch/mips/boot/dts/ralink/rt2880.dtsi
> similarity index 100%
> rename from arch/mips/boot/dts/rt2880.dtsi
> rename to arch/mips/boot/dts/ralink/rt2880.dtsi
> diff --git a/arch/mips/boot/dts/rt2880_eval.dts b/arch/mips/boot/dts/ralink/rt2880_eval.dts
> similarity index 100%
> rename from arch/mips/boot/dts/rt2880_eval.dts
> rename to arch/mips/boot/dts/ralink/rt2880_eval.dts
> diff --git a/arch/mips/boot/dts/rt3050.dtsi b/arch/mips/boot/dts/ralink/rt3050.dtsi
> similarity index 100%
> rename from arch/mips/boot/dts/rt3050.dtsi
> rename to arch/mips/boot/dts/ralink/rt3050.dtsi
> diff --git a/arch/mips/boot/dts/rt3052_eval.dts b/arch/mips/boot/dts/ralink/rt3052_eval.dts
> similarity index 100%
> rename from arch/mips/boot/dts/rt3052_eval.dts
> rename to arch/mips/boot/dts/ralink/rt3052_eval.dts
> diff --git a/arch/mips/boot/dts/rt3883.dtsi b/arch/mips/boot/dts/ralink/rt3883.dtsi
> similarity index 100%
> rename from arch/mips/boot/dts/rt3883.dtsi
> rename to arch/mips/boot/dts/ralink/rt3883.dtsi
> diff --git a/arch/mips/boot/dts/rt3883_eval.dts b/arch/mips/boot/dts/ralink/rt3883_eval.dts
> similarity index 100%
> rename from arch/mips/boot/dts/rt3883_eval.dts
> rename to arch/mips/boot/dts/ralink/rt3883_eval.dts
> --
> 2.2.0.rc0.207.ga3a616c
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-12-23 16:07 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-22 23:27 [PATCH 1/2] MIPS: Move device-trees into vendor sub-directories Andrew Bresticker
2014-12-22 23:27 ` [PATCH 2/2] MIPS: Add dtbs_install target Andrew Bresticker
[not found] ` <1419290863-19788-1-git-send-email-abrestic-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2014-12-23 16:07 ` Florian Fainelli [this message]
[not found] ` <CAGVrzcZPODEbQBF8Z+_r-6H3A_S-4Mi=1ALBf87ZmEngWzDpyw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-12-23 16:20 ` [PATCH 1/2] MIPS: Move device-trees into vendor sub-directories Kevin Cernekee
2014-12-23 16:41 ` Andrew Bresticker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAGVrzcZPODEbQBF8Z+_r-6H3A_S-4Mi=1ALBf87ZmEngWzDpyw@mail.gmail.com' \
--to=f.fainelli-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=abrestic-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org \
--cc=ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).