From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vinay Simha Subject: Re: [PATCH v2 2/4] dt-bindings: Add jdi lt070me05000 panel bindings Date: Fri, 22 Apr 2016 12:25:52 +0530 Message-ID: References: <20160414171500.GA11505@rob-hp-laptop> <1461144755-10633-1-git-send-email-simhavcs@gmail.com> <1461144755-10633-2-git-send-email-simhavcs@gmail.com> <20160421154546.GA20028@rob-hp-laptop> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Return-path: In-Reply-To: <20160421154546.GA20028@rob-hp-laptop> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Rob Herring Cc: Thierry Reding , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , "open list:DRM PANEL DRIVERS" , "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" , open list , "Sumit.semwal" , John Stultz , Archit Taneja List-Id: devicetree@vger.kernel.org On Thu, Apr 21, 2016 at 9:15 PM, Rob Herring wrote: > On Wed, Apr 20, 2016 at 03:02:31PM +0530, Vinay Simha BN wrote: >> Add documentation for lt070me05000 panel >> >> Signed-off-by: Vinay Simha BN >> --- >> .../bindings/display/panel/jdi,lt070me05000.txt | 43 ++++++++++++++++++++++ >> 1 file changed, 43 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt >> >> diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt >> new file mode 100644 >> index 0000000..ffe0550 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt >> @@ -0,0 +1,43 @@ >> +JDI model LT070ME05000 1200x1920 7" DSI Panel >> + >> +Required properties: >> +- compatible: should be "jdi,lt070me05000" >> +- power-supply: phandle of the regulator that provides the supply voltage >> + IOVCC , power supply for LCM (1.8V) >> +- vddp-supply: phandle of the regulator that provides the supply voltage >> + Power IC supply (3-5V) >> +- dcdc_en-supply: phandle of the regulator that provides the supply voltage >> + Power IC supply enable, High active >> +- reset-gpio: phandle of gpio for reset line >> + This should be 8mA, gpio can be configured using mux and pinctrl. >> + XRES, Reset, Low active >> +- enable-gpio: phandle of gpio for enable line >> + LED_EN, LED backlight enable, High active > > These should all be -gpios instead. will implement in v3 > >> +- vcc-gpio: phandle of regulator/gpio that provides the supply voltage >> + VDD, LED power supply (3-5V) > > Is it a regulator or gpio? > VDD is LED power supply, but in nexus 7 2nd gen they are using gpio 23 instead of regulator. if we use vcc-supply, not sure we can give the gpio device tree entry to it in nexus 7 dts. Any inputs ? >> + >> +Optional properties: >> +- pwm-gpio: phandle of gpio/pwm > > This should use the PWM binding. It may not be a GPIO on some hosts. pwm-gpio will go to the backlight (pwm). right now it is not used since pwm pm8921 upstream driver is not yet implemented. Shall i remove this pwm-gpio now and the backlight property when pwm pm8921 is implemented? > >> + pwm backlight control, this should be mapped to the backlight level >> + display brightness (0x51) >> + >> +Example: >> + >> + dsi0: qcom,mdss_dsi@4700000 { >> + panel@0 { >> + compatible = "jdi,lt070me05000"; >> + reg = <0>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&dsi_panel_pinctrl>; >> + >> + power-supply = <&pm8921_lvs5>; >> + vddp-supply = <&pm8921_l17>; >> + dcdc_en-supply = <&pm8921_lvs7>; >> + >> + reset-gpio = <&tlmm_pinmux 54 0>; >> + enable-gpio = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>; >> + vcc-gpio = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>; >> + >> + pwm-gpio = <&pm8921_gpio 26 GPIO_ACTIVE_HIGH>; >> + }; >> + }; >> -- >> 2.1.2 >> -- Regards, Vinay Simha.B.N. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html