devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Adam Ford <aford173@gmail.com>
To: Paul Elder <paul.elder@ideasonboard.com>
Cc: linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
	 devicetree@vger.kernel.org, kieran.bingham@ideasonboard.com,
	 tomi.valkeinen@ideasonboard.com, umang.jain@ideasonboard.com
Subject: Re: [PATCH v4 00/11] media: rkisp1: Add support for i.MX8MP
Date: Sat, 9 Dec 2023 17:59:44 -0600	[thread overview]
Message-ID: <CAHCN7x+_pow1_3yODH4BMCrUfCQDhrZK4AQMtt6df_7PC92kPg@mail.gmail.com> (raw)
In-Reply-To: <ZWhZzNQ6VWcfvWZy@pyrite.rasen.tech>

On Thu, Nov 30, 2023 at 3:45 AM Paul Elder <paul.elder@ideasonboard.com> wrote:
>
> On Wed, Nov 29, 2023 at 05:36:25AM -0600, Adam Ford wrote:
> > On Wed, Nov 29, 2023 at 3:28 AM Paul Elder <paul.elder@ideasonboard.com> wrote:
> > >
> > > This series extends the rkisp1 driver to support the ISP found in the
> > > NXP i.MX8MP SoC.
> > >
> > > The ISP IP cores in the Rockchip RK3399 (known as the "Rockchip ISP1")
> > > and in the NXP i.MX8MP have the same origin, and have slightly diverged
> > > over time as they are now independently developed (afaik) by Rockchip
> > > and VeriSilicon. The latter is marketed under the name "ISP8000Nano",
> > > and is close enough to the RK3399 ISP that it can easily be supported by
> > > the same driver.
> > >
> > > The last two patches add support for UYVY output format, which can be
> > > implemented on the ISP version in the i.MX8MP but not in the one in the
> > > RK3399.
> > >
> > > This version of the series specifically has been tested on a Polyhex
> > > Debix model A with an imx219 (Raspberry Pi cam v2).
> >
> > I have tested previous versions with a imx219 camera running in 4-lane
> > mode with great success.  Should I apply this series against
> > linux-next, or do I need to apply it against something in the media
> > tree to test?  I hope to test it tonight or tomorrow.
>
> I have it applied on 6.7-rc1.
>

For the series,

Tested-by:  Adam Ford <aford173@gmail.com> #imx8mp-beacon

>
> Thanks,
>
> Paul
>
> > >
> > > Laurent Pinchart (2):
> > >   media: rkisp1: Add and use rkisp1_has_feature() macro
> > >   media: rkisp1: Configure gasket on i.MX8MP
> > >
> > > Paul Elder (9):
> > >   media: rkisp1: Support setting memory stride for main path
> > >   media: rkisp1: Support devices lacking self path
> > >   media: rkisp1: Support devices lacking dual crop
> > >   media: rkisp1: Fix RSZ_CTRL bits for i.MX8MP
> > >   dt-bindings: media: rkisp1: Add i.MX8MP ISP to compatible
> > >   media: rkisp1: Add match data for i.MX8MP ISP
> > >   media: rkisp1: Shift DMA buffer addresses on i.MX8MP
> > >   media: rkisp1: Add YC swap capability
> > >   media: rkisp1: Add UYVY as an output format
> > >
> > >  .../bindings/media/rockchip-isp1.yaml         |  37 ++++-
> > >  .../platform/rockchip/rkisp1/rkisp1-capture.c | 128 ++++++++++++-----
> > >  .../platform/rockchip/rkisp1/rkisp1-common.h  |  35 ++++-
> > >  .../platform/rockchip/rkisp1/rkisp1-dev.c     |  66 +++++++--
> > >  .../platform/rockchip/rkisp1/rkisp1-isp.c     | 131 +++++++++++++++++-
> > >  .../platform/rockchip/rkisp1/rkisp1-regs.h    |  32 +++++
> > >  .../platform/rockchip/rkisp1/rkisp1-resizer.c |  27 ++--
> > >  include/uapi/linux/rkisp1-config.h            |   2 +
> > >  8 files changed, 398 insertions(+), 60 deletions(-)
> > >
> > > --
> > > 2.39.2
> > >

      reply	other threads:[~2023-12-09 23:59 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-29  9:27 [PATCH v4 00/11] media: rkisp1: Add support for i.MX8MP Paul Elder
2023-11-29  9:27 ` [PATCH v4 01/11] media: rkisp1: Add and use rkisp1_has_feature() macro Paul Elder
2023-11-29  9:27 ` [PATCH v4 02/11] media: rkisp1: Support setting memory stride for main path Paul Elder
2023-11-29  9:27 ` [PATCH v4 03/11] media: rkisp1: Support devices lacking self path Paul Elder
2023-11-29  9:27 ` [PATCH v4 04/11] media: rkisp1: Support devices lacking dual crop Paul Elder
2023-11-29  9:27 ` [PATCH v4 05/11] media: rkisp1: Fix RSZ_CTRL bits for i.MX8MP Paul Elder
2023-12-18 15:31   ` Tomi Valkeinen
2023-12-18 15:48     ` Laurent Pinchart
2023-11-29  9:27 ` [PATCH v4 06/11] dt-bindings: media: rkisp1: Add i.MX8MP ISP to compatible Paul Elder
2023-11-29  9:27 ` [PATCH v4 07/11] media: rkisp1: Add match data for i.MX8MP ISP Paul Elder
2023-11-29  9:27 ` [PATCH v4 08/11] media: rkisp1: Configure gasket on i.MX8MP Paul Elder
2023-11-29  9:27 ` [PATCH v4 09/11] media: rkisp1: Shift DMA buffer addresses " Paul Elder
2023-11-29  9:27 ` [PATCH v4 10/11] media: rkisp1: Add YC swap capability Paul Elder
2023-11-29  9:27 ` [PATCH v4 11/11] media: rkisp1: Add UYVY as an output format Paul Elder
2023-12-03 21:32   ` Adam Ford
2023-12-03 22:15     ` Adam Ford
2023-11-29 10:58 ` [PATCH v4 00/11] media: rkisp1: Add support for i.MX8MP Alexander Stein
2023-12-11  7:49   ` Alexander Stein
2023-11-29 11:36 ` Adam Ford
2023-11-30  9:45   ` Paul Elder
2023-12-09 23:59     ` Adam Ford [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAHCN7x+_pow1_3yODH4BMCrUfCQDhrZK4AQMtt6df_7PC92kPg@mail.gmail.com \
    --to=aford173@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kieran.bingham@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=paul.elder@ideasonboard.com \
    --cc=tomi.valkeinen@ideasonboard.com \
    --cc=umang.jain@ideasonboard.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).