Re: [PATCH V4] dt-bindings: soc: imx: Add binding doc for spba bus

[Adam Ford <aford173@gmail.com>]

On Wed, Nov 11, 2020 at 2:18 PM Rob Herring <robh@kernel.org> wrote:
>
> On Wed, 11 Nov 2020 09:25:23 -0600, Adam Ford wrote:
> > Add binding doc for fsl,spba-bus.
> >
> > Signed-off-by: Adam Ford <aford173@gmail.com>
> > ---
> > make dt_binding_check showed no errors if I did this right.
> >
> > V4:  Remove an accidental makefile change
> >      Move type:object under additional properties
> >
> > V3:  Rebase sample from aips-bus example
> >      Split off from series adding i.MX8M Nano functions to reduce noise
> >
> > V2:  Attempted to update yaml from feedback
> >
>
>
> My bot found errors running 'make dt_binding_check' on your patch:
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/bus/fsl,spba-bus.example.dt.yaml: bus@30000000: reg: [[805306368, 1048576]] is not of type 'object'
>         From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml
>

Rob,

Can you give me a pointer on what this message is saying?  I don't
undertsand the YAML language, and I cannot get my machine to generate
the same messages you're seeing.
>
> See https://patchwork.ozlabs.org/patch/1398351
>
> The base for the patch is generally the last rc1. Any dependencies
> should be noted.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade

I have installed yamllint, and I have run the above line, but when I
run make dt_binding_check it fails to finish script even before I add
this new binding.  If I revert the Makefile back to before the
implementation of yamllint, it works, but doesn't show the error.
When I restore the Makefile, it runs but it doesn't show the error.
Once I do a make clean, and run the dt_binding_check again, it fails
to finish with the following error

make[1]: *** [Documentation/devicetree/bindings/Makefile:59:
Documentation/devicetree/bindings/processed-schema-examples.json]
Error 123

It appears as if the processed-schema-examples.json is not generated at all.

When I revert back to the older makefile, it appears that file is
generated, but when I restore the makefile to the current version and
run it again, it doesn't show the dtschema warnings/errors you see.
I am guessing it's because the processed-schema-examples.json isn't
being generated correctly after I run make clean.

Do you have any ideas what might be missing from my build machine?

adam

>
> Please check and re-submit.
>