From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.8 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 550ACC3F2CE for ; Wed, 4 Mar 2020 21:03:04 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 16911217F4 for ; Wed, 4 Mar 2020 21:03:04 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="K49C+fYS" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2388355AbgCDVDC (ORCPT ); Wed, 4 Mar 2020 16:03:02 -0500 Received: from mail-vs1-f65.google.com ([209.85.217.65]:36513 "EHLO mail-vs1-f65.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728512AbgCDVDC (ORCPT ); Wed, 4 Mar 2020 16:03:02 -0500 Received: by mail-vs1-f65.google.com with SMTP id n6so2149739vsc.3 for ; Wed, 04 Mar 2020 13:03:00 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=mime-version:references:in-reply-to:from:date:message-id:subject:to :cc; bh=hSWbLAptYGm4youMYgWgnMN5qqb706efy6UOGCdWvcQ=; b=K49C+fYSdfa4qTb8U+6tb88/iuugs66Yo2DVdIczMqBe6W4j84aoX5JMToOwvzKmf3 utiGUUMiOdaBT/cDU6m0uhr5feLj9DrW+eni9RNCkSIU/m00M/eP8rmFlHctEFH0RUJ3 RlaVxwnX0o804N47nONMX28oVdZVBsksp4rg2IEJnotoobcrBNB69JWNxWrI3GO4QY9t PSyBiFAHvL+K1fYKQh8KxkII20W/8mOMjfYWPphz6o/XiAA2O50v7aRGX7P9xa2gBRWJ rU5FNOfZe55zyfYL8Wpr7+7BJiCeqcQEvd2tqqkV40C6nPMyGYEPDVE6ipMH8djlYDEM 78GQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:references:in-reply-to:from:date :message-id:subject:to:cc; bh=hSWbLAptYGm4youMYgWgnMN5qqb706efy6UOGCdWvcQ=; b=rZ/Sz/cp0zdBZhOokgLc6+oc3uX3wQlevuO0J/j6KA+AghFE8zeCVa883l3mARb/xZ F03naIjKYCF0rBm7lLPyS9vstCdIms3Zqt+ry9x1HWinfM49rpmjVlbxEW6qTmSQVhzH Bfa4JU2xkkuRm4FRz+UPtDajGBaUEA9rXGtBO26W9uoRwLJ6XXFtSuHsoAhVumM4uDY9 LwyqV3tK+2atidcUlyZJaxUGo4uryD3gpw9U7Kkedi17c4zriw4n5kHID1zgiN4gl20u OqdXaHb6cR0EM4AC641kRg93DrNWiLRfFj9aT1T4jtWw5vhzm2DYkrNF1kA8L/0Dyqzp rwpw== X-Gm-Message-State: ANhLgQ1NwPRz+N0jOOYJBKnUdUIVZ637a89DhDhWzHtGm205cZVUS28E DUVsjKUDalFNQFgb+4DIjIDAt+/jtrxERfIJrrGJmqF6 X-Google-Smtp-Source: ADFU+vvuIaCJ9RoJIG1WciLy4L7eJyoFJkFSRigHOLZeFlCU/g+PxtzylpEHh1UjrV15fqmxiNhhq3ZwJB6/YQhziJc= X-Received: by 2002:a67:e99a:: with SMTP id b26mr2947573vso.27.1583355779012; Wed, 04 Mar 2020 13:02:59 -0800 (PST) MIME-Version: 1.0 References: <59d24f8ec98e29d119c5cbdb2abe6d4644cc51cf.1582528977.git.amit.kucheria@linaro.org> In-Reply-To: From: Amit Kucheria Date: Thu, 5 Mar 2020 02:32:47 +0530 Message-ID: Subject: Re: [RFC PATCH v1 3/3] dt-bindings: thermal: Add yaml bindings for thermal zones To: Rob Herring Cc: "linux-kernel@vger.kernel.org" , linux-arm-msm , Stephen Boyd , Matthias Kaehlcke , Daniel Lezcano , Zhang Rui , "open list:THERMAL" , "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" Content-Type: text/plain; charset="UTF-8" Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org On Tue, Feb 25, 2020 at 3:24 AM Rob Herring wrote: > > On Mon, Feb 24, 2020 at 1:26 AM Amit Kucheria wrote: > > > > As part of moving the thermal bindings to YAML, split it up into 3 > > bindings: thermal sensors, cooling devices and thermal zones. > > > > The thermal-zone binding is a software abstraction to capture the > > properties of each zone - how often they should be checked, the > > temperature thresholds (trips) at which mitigation actions need to be > > taken and the level of mitigation needed at those thresholds. > > > > Signed-off-by: Amit Kucheria > > --- > > .../bindings/thermal/thermal-zones.yaml | 302 ++++++++++++++++++ > > 1 file changed, 302 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/thermal/thermal-zones.yaml > > > > diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml > > new file mode 100644 > > index 000000000000..bc1ce8e41324 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml > > @@ -0,0 +1,302 @@ > > +# SPDX-License-Identifier: (GPL-2.0 OR MIT) > > Why MIT instead of BSD-2-Clause? And do you have rights to add that? > Any text you copied over from the .txt file was only GPL2. Relicensing > would be nice if you can get permission from the authors. Changed back to GPL2. I will send out a separate email to get permission for relicensing the bindings. > > +# Copyright 2020 Linaro Ltd. > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/thermal/thermal-zones.yaml# > > +$schema: http://devicetree.org/meta-schemas/base.yaml# > > + > > +title: Thermal zone binding > > + > > +maintainers: > > + - Amit Kucheria > > + > > +description: | > > + Thermal management is achieved in devicetree by describing the sensor hardware > > + and the software abstraction of cooling devices and thermal zones required to > > + take appropriate action to mitigate thermal overloads. > > + > > + The following node types are used to completely describe a thermal management > > + system in devicetree: > > + - thermal-sensor: device that measures temperature, has SoC-specific bindings > > + - cooling-device: device used to dissipate heat either passively or artively > > typo Fixed. > > > + - thermal-zones: a container of the following node types used to describe all > > + thermal data for the platform > > + > > + This binding describes the thermal-zones. > > + > > + The polling-delay properties of a thermal-zone are bound to the maximum dT/dt > > + (temperature derivative over time) in two situations for a thermal zone: > > + 1. when passive cooling is activated (polling-delay-passive) > > + 2. when the zone just needs to be monitored (polling-delay) or when > > + active cooling is activated. > > + > > + The maximum dT/dt is highly bound to hardware power consumption and > > + dissipation capability. The delays should be chosen to account for said > > + max dT/dt, such that a device does not cross several trip boundaries > > + unexpectedly between polls. Choosing the right polling delays shall avoid > > + having the device in temperature ranges that may damage the silicon structures > > + and reduce silicon lifetime. > > + > > +properties: > > + thermal-zones: > > + type: object > > + description: > > + A /thermal-zones node is required in order to use the thermal framework to > > + manage input from the various thermal zones in the system in order to > > + mitigate thermal overload conditions. It does not represent a real device > > + in the system, but acts as a container to link thermal sensor devices, > > + platform-data regarding temperature thresholds and the mitigation actions > > + to take when the temperature crosses those thresholds. > > + > > + properties: > > + $nodename: > > + pattern: "^[a-zA-Z][a-zA-Z0-9,\\-]{1,12}-thermal$" > > + type: object > > + description: > > + Each thermal zone node contains information about how frequently it > > + must be checked, the sensor responsible for reporting temperature for > > + this zone, one sub-node containing the various trip points for this > > + zone and one sub-node containing all the zone cooling-maps. > > + > > + properties: > > + polling-delay: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + minimum: 0 > > + description: > > + The maximum number of milliseconds to wait between polls when > > + checking this thermal zone. Setting this to 0 disables the polling > > + timers setup by the thermal framework and assumes that the thermal > > + sensors in this zone support interrupts. > > + > > + polling-delay-passive: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + minimum: 0 > > + description: > > + The maximum number of milliseconds to wait between polls when > > + checking this thermal zone while doing passive cooling. Setting > > + this to 0 disables the polling timers setup by the thermal > > + framework and assumes that the thermal sensors in this zone > > + support interrupts. > > + > > + thermal-sensors: > > + $ref: /schemas/types.yaml#/definitions/phandle-array > > + description: > > + A list of thermal sensor phandles and sensor specifiers used to > > + monitor this thermal zone. > > + > > + trips: > > + type: object > > + description: > > + This node describes a set of points in the temperature domain at > > + which the thermal framework needs to takes action. The actions to > > + be taken are defined in another node called cooling-maps. > > + > > + patternProperties: > > + "^[a-zA-Z][a-zA-Z0-9,+\\._]{0,63}$": > > + type: object > > + > > + properties: > > + temperature: > > + $ref: /schemas/types.yaml#/definitions/int32 > > + description: > > + An integer expressing the trip temperature in millicelsius. > > Wouldn't 200000 mC be a reasonable max? And -273000 mC min. It would indeed. :-) > > + > > + hysteresis: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + description: > > + An unsigned integer expressing the hysteresis delta with > > + respect to the trip temperature property above, also in > > + millicelsius. > > + > > + type: > > + oneOf: > > + - items: > > + - enum: > > Drop oneOf and items. Just enum is enough. Fixed. > > > + - active > > + - passive > > + - hot > > + - critical > > + description: | > > + There are four valid trip types, > > + - active - enable active cooling e.g. fans > > + - passive - enable passive cooling e.g. throttling cpu > > + - hot - send notification to driver if .notify > > + callback registered > > + - critical - send notification to driver if .notify > > + callback registered and trigger a shutdown > > Perhaps make these comments on each enum entry. I've moved the one-line descriptions to comments before each enum entry. However, I ended up adding more detailed descriptions in the description sections because I felt these are not well-defined in documentation. Let me know what you think. > > + > > + required: > > + - temperature > > + - hysteresis > > + - type > > 'additionalProperties: false'? Or can the node have other properties? Added. > > + > > + cooling-maps: > > + type: object > > + description: > > + This node describes the action to be taken when a thermal zone > > + crosses one of the temperature thresholds described in the trips > > + node. The action takes the form of a mapping relation between a > > + trip and the target cooling device state. > > + > > + patternProperties: > > + "^map[0-9][-a-zA-Z0-9]*$": > > + type: object > > + > > + properties: > > + trip: > > + $ref: /schemas/types.yaml#/definitions/phandle > > + description: > > + A phandle of a trip point node within this thermal zone. > > + > > + cooling-device: > > + $ref: /schemas/types.yaml#/definitions/phandle-array > > + description: > > + A list of cooling device phandles along with the minimum > > + and maximum cooling state specifiers for each cooling > > + device. Using the THERMAL_NO_LIMIT (-1UL) constant in the > > + cooling-device phandle limit specifier lets the framework > > + use the minimum and maximum cooling state for that cooling > > + device automatically. > > + > > + contribution: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + minimum: 0 > > + maximum: 100 > > + description: > > + The contribution of the cooling devices at the trip > > + temperature, both referenced in this map, to this thermal > > + zone as a percentage. > > + > > + required: > > + - trip > > + - cooling-device > > 'additionalProperties: false'? Added Thanks for the review. > > > + > > +examples: > > + - | > > + #include > > + #include > > + > > + // Example 1: SDM845 TSENS > > + soc: soc@0 { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + > > + /* ... */ > > + > > + tsens0: thermal-sensor@c263000 { > > + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; > > + reg = <0 0x0c263000 0 0x1ff>, /* TM */ > > + <0 0x0c222000 0 0x1ff>; /* SROT */ > > + #qcom,sensors = <13>; > > + interrupts = ; > > + interrupt-names = "uplow"; > > + #thermal-sensor-cells = <1>; > > + }; > > + > > + tsens1: thermal-sensor@c265000 { > > + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; > > + reg = <0 0x0c265000 0 0x1ff>, /* TM */ > > + <0 0x0c223000 0 0x1ff>; /* SROT */ > > + #qcom,sensors = <8>; > > + interrupts = ; > > + interrupt-names = "uplow"; > > + #thermal-sensor-cells = <1>; > > + }; > > + }; > > + > > + /* ... */ > > + > > + thermal-zones { > > + cpu0-thermal { > > + polling-delay-passive = <250>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = <&tsens0 1>; > > + > > + trips { > > + cpu0_alert0: trip-point0 { > > + temperature = <90000>; > > + hysteresis = <2000>; > > + type = "passive"; > > + }; > > + > > + cpu0_alert1: trip-point1 { > > + temperature = <95000>; > > + hysteresis = <2000>; > > + type = "passive"; > > + }; > > + > > + cpu0_crit: cpu_crit { > > + temperature = <110000>; > > + hysteresis = <1000>; > > + type = "critical"; > > + }; > > + }; > > + > > + cooling-maps { > > + map0 { > > + trip = <&cpu0_alert0>; > > + cooling-device = <&CPU0 THERMAL_NO_LIMIT > > + THERMAL_NO_LIMIT>, > > + <&CPU1 THERMAL_NO_LIMIT > > + THERMAL_NO_LIMIT>, > > + <&CPU2 THERMAL_NO_LIMIT > > + THERMAL_NO_LIMIT>, > > + <&CPU3 THERMAL_NO_LIMIT > > + THERMAL_NO_LIMIT>; > > + }; > > + > > + map1 { > > + trip = <&cpu0_alert1>; > > + cooling-device = <&CPU0 THERMAL_NO_LIMIT > > + THERMAL_NO_LIMIT>, > > + <&CPU1 THERMAL_NO_LIMIT > > + THERMAL_NO_LIMIT>, > > + <&CPU2 THERMAL_NO_LIMIT > > + THERMAL_NO_LIMIT>, > > + <&CPU3 THERMAL_NO_LIMIT > > + THERMAL_NO_LIMIT>; > > + }; > > + }; > > + }; > > + > > + /* ... */ > > + > > + cluster0-thermal { > > + polling-delay-passive = <250>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = <&tsens0 5>; > > + > > + trips { > > + cluster0_alert0: trip-point0 { > > + temperature = <90000>; > > + hysteresis = <2000>; > > + type = "hot"; > > + }; > > + cluster0_crit: cluster0_crit { > > + temperature = <110000>; > > + hysteresis = <2000>; > > + type = "critical"; > > + }; > > + }; > > + }; > > + > > + /* ... */ > > + > > + gpu-thermal-top { > > + polling-delay-passive = <250>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = <&tsens0 11>; > > + > > + trips { > > + gpu1_alert0: trip-point0 { > > + temperature = <90000>; > > + hysteresis = <2000>; > > + type = "hot"; > > + }; > > + }; > > + }; > > + }; > > +... > > -- > > 2.20.1 > >