From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andy Shevchenko Subject: Re: [PATCH v3 0/2] add support for Socionext SynQuacer I2C controller Date: Tue, 27 Feb 2018 17:59:20 +0200 Message-ID: References: <20180227110107.30259-1-ard.biesheuvel@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Return-path: In-Reply-To: <20180227110107.30259-1-ard.biesheuvel@linaro.org> Sender: linux-kernel-owner@vger.kernel.org To: Ard Biesheuvel Cc: Wolfram Sang , Rob Herring , Mark Rutland , linux-i2c , devicetree , Linux Kernel Mailing List , linux-arm Mailing List , Jassi Brar List-Id: devicetree@vger.kernel.org On Tue, Feb 27, 2018 at 1:01 PM, Ard Biesheuvel wrote: > Add a binding and a driver for the I2C IP found in the Socionext SynQuacer > SoC, which is essentially a rebranded version of the Fujitsu F_I2C controller. > Thanks for an update! FWIW, Reviewed-by: Andy Shevchenko P.S. clk_prepare_enable() may fail in ->probe() as well. > v3: > - incorporate more of Andy's review comments (#2), especially regarding the > bus speed and clock source handling for ACPI > - patch #1 unchanged. > > v2: > - incorporate Andy's review comments (#2) > - patch #1 unchanged. > > Ard Biesheuvel (2): > dt-bindings: i2c: add binding for Socionext SynQuacer I2C > i2c: add support for Socionext SynQuacer I2C controller > > Documentation/devicetree/bindings/i2c/i2c-synquacer.txt | 29 + > drivers/i2c/busses/Kconfig | 10 + > drivers/i2c/busses/Makefile | 1 + > drivers/i2c/busses/i2c-synquacer.c | 787 ++++++++++++++++++++ > 4 files changed, 827 insertions(+) > create mode 100644 Documentation/devicetree/bindings/i2c/i2c-synquacer.txt > create mode 100644 drivers/i2c/busses/i2c-synquacer.c > > -- > 2.11.0 > -- With Best Regards, Andy Shevchenko