From mboxrd@z Thu Jan  1 00:00:00 1970
From: Yash Shah <yash.shah@sifive.com>
Subject: Re: [PATCH v2 0/2] Add macb support for SiFive FU540-C000
Date: Mon, 17 Jun 2019 10:13:05 +0530
Message-ID: <CAJ2_jOH2X6+CcNCruxX0aeCzPnjcGuv-X1Q4eESsY6PyW1LViA@mail.gmail.com>
References: <1560745167-9866-1-git-send-email-yash.shah@sifive.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="UTF-8"
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <1560745167-9866-1-git-send-email-yash.shah@sifive.com>
Sender: linux-kernel-owner@vger.kernel.org
To: David Miller <davem@davemloft.net>, devicetree@vger.kernel.org, netdev <netdev@vger.kernel.org>, linux-kernel@vger.kernel.org, linux-riscv@lists.infradead.org
Cc: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Nicolas Ferre <nicolas.ferre@microchip.com>, Palmer Dabbelt <palmer@sifive.com>, Albert Ou <aou@eecs.berkeley.edu>, Paul Walmsley <paul.walmsley@sifive.com>, =?UTF-8?Q?Petr_=C5=A0tetiar?= <ynezz@true.cz>, Sachin Ghadi <sachin.ghadi@sifive.com>
List-Id: devicetree@vger.kernel.org

On Mon, Jun 17, 2019 at 9:49 AM Yash Shah <yash.shah@sifive.com> wrote:
>
> On FU540, the management IP block is tightly coupled with the Cadence
> MACB IP block. It manages many of the boundary signals from the MACB IP
> This patchset controls the tx_clk input signal to the MACB IP. It
> switches between the local TX clock (125MHz) and PHY TX clocks. This
> is necessary to toggle between 1Gb and 100/10Mb speeds.
>
> Future patches may add support for monitoring or controlling other IP
> boundary signals.
>
> This patchset is mostly based on work done by
> Wesley Terpstra <wesley@sifive.com>
>
> This patchset is based on Linux v5.2-rc1 and tested on HiFive Unleashed
> board with additional board related patches needed for testing can be
> found at dev/yashs/ethernet branch of:

Correction in branch name: dev/yashs/ethernet_v2

> https://github.com/yashshah7/riscv-linux.git
>
> Change History:
> V2:
> - Change compatible string from "cdns,fu540-macb" to "sifive,fu540-macb"
> - Add "MACB_SIFIVE_FU540" in Kconfig to support SiFive FU540 in macb
>   driver. This is needed because on FU540, the macb driver depends on
>   SiFive GPIO driver.
> - Avoid writing the result of a comparison to a register.
> - Fix the issue of probe fail on reloading the module reported by:
>   Andreas Schwab <schwab@suse.de>
>
> Yash Shah (2):
>   macb: bindings doc: add sifive fu540-c000 binding
>   macb: Add support for SiFive FU540-C000
>
>  Documentation/devicetree/bindings/net/macb.txt |   3 +
>  drivers/net/ethernet/cadence/Kconfig           |   6 ++
>  drivers/net/ethernet/cadence/macb_main.c       | 129 +++++++++++++++++++++++++
>  3 files changed, 138 insertions(+)
>
> --
> 1.9.1
>