From: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Marek Szyprowski <m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Cc: "Anand Moon"
<linux.amoon-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
"Richard Genoud"
<richard.genoud-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
"Bartłomiej Żołnierkiewicz"
<b.zolnierkie-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
"Felipe Balbi" <balbi-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
"Huang Rui" <ray.huang-5C7GfCeVMHo@public.gmane.org>,
"Javier Martinez Canillas"
<javier-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org>,
"Heikki Krogerus"
<heikki.krogerus-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
"Kukjin Kim" <kgene-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"Linux USB Mailing List"
<linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"Linux Kernel"
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [PATCH] ARM: dts: Odroid XU4: fix USB3.0 ports
Date: Wed, 25 Jan 2017 16:17:08 +0200 [thread overview]
Message-ID: <CAJKOXPd+CnmVG282NEVCFqS_3YEURCWx41udyQKpL21keGJOWg@mail.gmail.com> (raw)
In-Reply-To: <ef6c0d33-73d6-805e-aeab-86190e8b0aa0-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
On Wed, Jan 25, 2017 at 3:48 PM, Marek Szyprowski
<m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> wrote:
> Hi Krzysztof,
>
> On 2017-01-25 08:55, Krzysztof Kozlowski wrote:
>>
>> On Wed, Jan 25, 2017 at 7:51 AM, Anand Moon <linux.amoon-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>>>
>>> On 24 January 2017 at 19:18, Richard Genoud <richard.genoud-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>>> wrote:
>>>>
>>>> Since commit 2164a476205ccc ("usb: dwc3: set SUSPHY bit for all cores"),
>>>> the USB ports on odroid-XU4 don't work anymore.
>>>>
>>>> Inserting an usb key (USB2.0) on the USB3.0 port result in:
>>>> [ 64.488264] xhci-hcd xhci-hcd.2.auto: Port resume took longer than
>>>> 20000 msec, port status = 0xc400fe3
>>>> [ 74.568156] xhci-hcd xhci-hcd.2.auto: xHCI host not responding to
>>>> stop endpoint command.
>>>> [ 74.574806] xhci-hcd xhci-hcd.2.auto: Assuming host is dying, halting
>>>> host.
>>>> [ 74.601970] xhci-hcd xhci-hcd.2.auto: HC died; cleaning up
>>>> [ 74.606276] usb 3-1: USB disconnect, device number 2
>>>> [ 74.613565] usb 4-1: USB disconnect, device number 2
>>>> [ 74.621208] usb usb3-port1: couldn't allocate usb_device
>>>> NB: it's not related to USB2.0 devices, I get the same result with an
>>>> USB3.0 device (SATA to USB3 for instance).
>>>> NB2: it doesn't happen on an odriod-XU3 board, that doesn't have the
>>>> realtek RTL8153 chip.
>>>>
>>>> If the lines:
>>>> if (dwc->revision > DWC3_REVISION_194A)
>>>> reg |= DWC3_GUSB3PIPECTL_SUSPHY;
>>>> are commented out, the USB3.0 start working.
>>>>
>>>> For a full analyse: https://lkml.org/lkml/2017/1/18/678
>>>>
>>>> Felipe suggested that suspend should be disabled temporarily while
>>>> what's wrong with DCW3 is figured out.
>>>>
>>>> Tested on Odroid XU4
>>>>
>>>> Suggested-by: Felipe Balbi <felipe.balbi-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
>>>> Tested-by: Richard Genoud <richard.genoud-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>>>> Signed-off-by: Richard Genoud <richard.genoud-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>>>> Cc: stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org # 4.4+
>>>> Fixes: 2164a476205ccc ("usb: dwc3: set SUSPHY bit for all cores")
>>>> ---
>>>> arch/arm/boot/dts/exynos5422-odroidxu4.dts | 9 +++++++++
>>>> 1 file changed, 9 insertions(+)
>>>>
>>>> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts
>>>> b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
>>>> index 2faf88627a48..f62dbd9b5ad3 100644
>>>> --- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts
>>>> +++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
>>>> @@ -43,6 +43,15 @@
>>>> status = "okay";
>>>> };
>>>>
>>>> +&usbdrd_dwc3_0 {
>>>> + /*
>>>> + * without that, usb devices are not recognized when
>>>> + * they are plugged.
>>>> + * cf: https://lkml.org/lkml/2017/1/18/678
>>>> + */
>>>> + snps,dis_u3_susphy_quirk;
>>>> +};
>>>> +
>>>> &usbdrd_dwc3_1 {
>>>> dr_mode = "host";
>>>> };
>>>> --
>>>
>>> Thanks for this patch.
>>> But could you consider moving this changes as below.
>>>
>>> https://lkml.org/lkml/2015/3/18/400
>>
>> The patch above (and other DTS patches from the set) was not even sent
>> to linux-samsung-soc nor to me... It is sad how easily one's work can
>> disappear. Also, it is really worthless to solve the same problem
>> twice.
>
>
> Well, they were sent about 2 years ago... and you were also working on this
> topic. ;)
Nope, I have never worked on this. That time I was in Korea so my
tasks were completely different. Later when I got back, I took for a
second U3 OTG which was not involving this thing.
>> Cc Marek and Bartlomiej,
>> Guys, do you want to continue with Robert's patch (linked above by
>> Anand)? If yes, please take the ownership (Robert's address is not
>> valid anymore). If not, I will take Richard's patch after
>> resubmission.
>
>
> Take Richard's patch because it has a bit more details describing why such
> quirk
> is needed.
>
> Richard: in Roberts patch there is also a quirk for USB 2.0 mode
> (snps,dis_u2_susphy_quirk). Could you check if it really needed?
>
> Maybe it would make sense to set those quirks for both DWC3 controllers, as
> this
> issue with PHY suspend seems to be a Exynos specific thing.
Okay,
Richard, please continue with your patch.
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-01-25 14:17 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-24 13:48 [PATCH] ARM: dts: Odroid XU4: fix USB3.0 ports Richard Genoud
2017-01-24 18:22 ` Krzysztof Kozlowski
2017-01-25 8:34 ` Richard Genoud
[not found] ` <20170124134809.23315-1-richard.genoud-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-01-25 5:51 ` Anand Moon
[not found] ` <CANAwSgRAT0-XETx=yVRgM4GfukFLLEw-hqHjYGEWs0tqAx8g2g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-01-25 7:55 ` Krzysztof Kozlowski
[not found] ` <CAJKOXPesCuYsK23466=6W9PPX7DtztdymZLBfNz0Dmjzwp4qBA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-01-25 13:48 ` Marek Szyprowski
[not found] ` <ef6c0d33-73d6-805e-aeab-86190e8b0aa0-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2017-01-25 14:17 ` Krzysztof Kozlowski [this message]
2017-01-25 18:34 ` Anand Moon
[not found] ` <CAJKOXPd+CnmVG282NEVCFqS_3YEURCWx41udyQKpL21keGJOWg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-01-27 7:29 ` Richard Genoud
[not found] ` <4dca1d8e-f955-7791-90c0-4e73a273fe62-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-02-09 10:26 ` Richard Genoud
2017-02-10 13:34 ` Krzysztof Kozlowski
2017-02-10 15:12 ` Richard Genoud
2017-05-08 16:19 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAJKOXPd+CnmVG282NEVCFqS_3YEURCWx41udyQKpL21keGJOWg@mail.gmail.com \
--to=krzk-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=b.zolnierkie-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=balbi-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=heikki.krogerus-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=javier-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org \
--cc=kgene-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux.amoon-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=ray.huang-5C7GfCeVMHo@public.gmane.org \
--cc=richard.genoud-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).