From mboxrd@z Thu Jan 1 00:00:00 1970 From: Moritz Fischer Subject: Re: [PATCH 2/3] dt-bindings: hwmon: Add bindings for Google Chromium EC HWMON Date: Fri, 14 Apr 2017 10:47:34 -0700 Message-ID: References: <1491602410-31518-1-git-send-email-moritz.fischer@ettus.com> <1491602410-31518-2-git-send-email-moritz.fischer@ettus.com> <20170413200140.lcynmsv255ktoiyl@rob-hp-laptop> <20170413210707.GA16304@roeck-us.net> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Return-path: In-Reply-To: Sender: linux-hwmon-owner@vger.kernel.org To: Rob Herring Cc: Guenter Roeck , Moritz Fischer , linux-hwmon@vger.kernel.org, "linux-kernel@vger.kernel.org" , "devicetree@vger.kernel.org" , Lee Jones , Olof Johansson , Jean Delvare , Mark Rutland List-Id: devicetree@vger.kernel.org On Fri, Apr 14, 2017 at 5:48 AM, Rob Herring wrote: > On Thu, Apr 13, 2017 at 4:07 PM, Guenter Roeck wrote: >> On Thu, Apr 13, 2017 at 03:01:40PM -0500, Rob Herring wrote: >>> On Fri, Apr 07, 2017 at 03:00:09PM -0700, Moritz Fischer wrote: >>> > From: Moritz Fischer >>> > >>> > Add bindings for the Chromium EC HWMON. The Chromium EC HWMON >>> > allows monitoring of temperature sensors and fans attached to the >>> > EC. >>> > >>> > Signed-off-by: Moritz Fischer >>> > --- >>> > .../devicetree/bindings/hwmon/cros-ec-hwmon.txt | 25 ++++++++++++++++++++++ >>> > 1 file changed, 25 insertions(+) >>> > create mode 100644 Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt >>> > >>> > diff --git a/Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt b/Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt >>> > new file mode 100644 >>> > index 0000000..4c94869 >>> > --- /dev/null >>> > +++ b/Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt >>> > @@ -0,0 +1,25 @@ >>> > +Chromium Embedded Controller EC temperature and fan control >>> > +----------------------------------------------------------- >>> > + >>> > +Google's Chromium EC HWMON is a hwmon implemented byimplemented by the Chromium EC >>> > +firmware attached to the Embedded Controller (EC) and controlled via a host-command >>> > +interface. >>> > + >>> > +An EC HWMON node should be only found as a sub-node of the EC node (see >>> > +Documentation/devicetree/bindings/mfd/cros-ec.txt). >>> > + >>> > +Required properties: >>> > +- compatible: Must contain "google,cros-ec-hwmon" >>> > + >>> > +Example: >>> > + embedded-controller@1e { >>> > + reg = <0x1e>; >>> > + compatible = "google,cros-ec-i2c"; >>> > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; >>> > + interrupt-parent = <&gpio0>; >>> > + >>> > + hwmon { >>> > + compatible = "google,cros-ec-hwmon"; >>> >>> This is sufficient for all devices? I don't see that DT provides >>> anything here other than instantiating a device, but the parent device >>> can just as easily do that. >>> >> The parent driver (drivers/mfd/cros_ec_i2c.c) calls cros_ec_register(), >> which uses uses of_platform_populate() to populate all sub-devices. >> There are various examples in the dts files (look for "google,cros-ec"). >> Does it really make sense to start a second method for instantiating >> sub-devices ? > > Okay, I suppose not. That wasn't clear from the example. Do you want me to clarify that in the example somehow? Moritz