devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Keguang Zhang <keguang.zhang@gmail.com>
To: Conor Dooley <conor@kernel.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	 Vignesh Raghavendra <vigneshr@ti.com>,
	Rob Herring <robh@kernel.org>,
	 Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	linux-mtd@lists.infradead.org,  linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org,  linux-media@vger.kernel.org
Subject: Re: [PATCH v8 1/2] dt-bindings: mtd: Add Loongson-1 NAND Controller
Date: Fri, 9 Aug 2024 14:47:53 +0800	[thread overview]
Message-ID: <CAJhJPsVOTAj9ePzeHkwDX049FKd=9Rs_NjQE2qwQL76GKSC66Q@mail.gmail.com> (raw)
In-Reply-To: <20240808-backyard-unglue-3cf429ad8da5@spud>

On Thu, Aug 8, 2024 at 11:37 PM Conor Dooley <conor@kernel.org> wrote:
>
> On Thu, Aug 08, 2024 at 07:22:19PM +0800, Keguang Zhang via B4 Relay wrote:
> > From: Keguang Zhang <keguang.zhang@gmail.com>
> >
> > Add devicetree binding document for Loongson-1 NAND Controller.
> >
> > Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
> > ---
> > Changes in v8:
> > - Add a description part.
> > - Adjust the compatible because the match data for ls1c-nfc differs from ls1b-nfc.
> > - Mark 'nand-use-soft-ecc-engine' and 'nand-ecc-algo' as mandatory.
> > - Delete the superfluous blank lines.
> >
> > Changes in v7:
> > - rename the file to loongson,ls1b-nfc.yaml
> >
> > Changes in v6:
> > - A newly added patch
> > ---
> >  .../devicetree/bindings/mtd/loongson,ls1b-nfc.yaml | 75 ++++++++++++++++++++++
> >  1 file changed, 75 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/mtd/loongson,ls1b-nfc.yaml b/Documentation/devicetree/bindings/mtd/loongson,ls1b-nfc.yaml
> > new file mode 100644
> > index 000000000000..7ce335324a29
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mtd/loongson,ls1b-nfc.yaml
>
> When I first read "nfc" here I thought it was a copy-paste mistake, as
> "nfc" is a technology of it's own. I think it would make sense to rename
> to "loongson,ls1b-nand-controller" etc to remove that sort of confusion.
> These devices might not implement NFC, but what's to say that a future
> device will not?
>
Sorry for the confusion.
The string "loongson,ls1b-nand-controller" might be too long.
May I rename it to "loongson,ls1b-nand"?

> Cheers,
> Conor.
>
> > @@ -0,0 +1,75 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mtd/loongson,ls1b-nfc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Loongson-1 NAND Controller
> > +
> > +maintainers:
> > +  - Keguang Zhang <keguang.zhang@gmail.com>
> > +
> > +description: |
>
> This | is not needed.
>
Will remove |.
Thanks!

> > +  The Loongson-1 NAND controller abstracts all supported operations,
> > +  meaning it does not support low-level access to raw NAND flash chips.
> > +  Moreover, the controller is paired with the DMA engine to perform
> > +  READ and PROGRAM functions.
> > +
> > +allOf:
> > +  - $ref: nand-controller.yaml
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
> > +      - enum:
> > +          - loongson,ls1b-nfc
> > +          - loongson,ls1c-nfc
> > +      - items:
> > +          - enum:
> > +              - loongson,ls1a-nfc
> > +          - const: loongson,ls1b-nfc
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  dmas:
> > +    maxItems: 1
> > +
> > +  dma-names:
> > +    const: rxtx
> > +
> > +patternProperties:
> > +  "^nand@[0-3]$":
> > +    type: object
> > +    $ref: raw-nand-chip.yaml
> > +
> > +    required:
> > +      - nand-use-soft-ecc-engine
> > +      - nand-ecc-algo
> > +
> > +    unevaluatedProperties: false
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - dmas
> > +  - dma-names
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    nand-controller@1fe78000 {
> > +        compatible = "loongson,ls1b-nfc";
> > +        reg = <0x1fe78000 0x40>;
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +        dmas = <&dma 0>;
> > +        dma-names = "rxtx";
> > +
> > +        nand@0 {
> > +            reg = <0>;
> > +            nand-use-soft-ecc-engine;
> > +            nand-ecc-algo = "hamming";
> > +        };
> > +    };
> >
> > --
> > 2.43.0
> >
> >



--
Best regards,

Keguang Zhang

  reply	other threads:[~2024-08-09  6:48 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-08 11:22 [PATCH v8 0/2] Add support for Loongson-1 NAND Keguang Zhang via B4 Relay
2024-08-08 11:22 ` [PATCH v8 1/2] dt-bindings: mtd: Add Loongson-1 NAND Controller Keguang Zhang via B4 Relay
2024-08-08 15:37   ` Conor Dooley
2024-08-09  6:47     ` Keguang Zhang [this message]
2024-08-09 14:49       ` Conor Dooley
2024-08-14  7:12         ` Miquel Raynal
2024-08-14 14:23           ` Conor Dooley
2024-08-14 14:48             ` Miquel Raynal
2024-08-19  2:51           ` Keguang Zhang
2024-08-08 11:22 ` [PATCH v8 2/2] mtd: rawnand: Add Loongson-1 NAND Controller driver Keguang Zhang via B4 Relay

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAJhJPsVOTAj9ePzeHkwDX049FKd=9Rs_NjQE2qwQL76GKSC66Q@mail.gmail.com' \
    --to=keguang.zhang@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=conor@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=robh@kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).