From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?UTF-8?B?Q2zDqW1lbnQgUMOpcm9u?= Subject: Re: [PATCH v2 5/5] ARM: dts: sun50i: h6: Introduce Beelink GS1 board Date: Fri, 5 Apr 2019 18:40:23 +0200 Message-ID: References: <20190405122446.2101-1-peron.clem@gmail.com> <20190405122446.2101-5-peron.clem@gmail.com> <20190405151100.jjjg55z7sg35ijxw@flea> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable Return-path: In-Reply-To: <20190405151100.jjjg55z7sg35ijxw@flea> Sender: linux-kernel-owner@vger.kernel.org To: Maxime Ripard Cc: Rob Herring , Chen-Yu Tsai , Icenowy Zheng , Jagan Teki , devicetree , linux-kernel , linux-arm-kernel , linux-sunxi@googlegroups.com List-Id: devicetree@vger.kernel.org Hi, On Fri, 5 Apr 2019 at 17:11, Maxime Ripard wrot= e: > > On Fri, Apr 05, 2019 at 02:53:35PM +0200, Cl=C3=A9ment P=C3=A9ron wrote: > > Hi, > > > > Adding this r_pio regulators make a new error in the bootlog : > > > > [ 0.346843] sun50i-h6-r-pinctrl 7022000.pinctrl: Couldn't get bank > > PL regulator > > [ 0.346853] sun50i-h6-r-pinctrl 7022000.pinctrl: request() failed fo= r pin 352 > > [ 0.346862] sun50i-h6-r-pinctrl 7022000.pinctrl: pin-352 > > (7081400.i2c) status -517 > > [ 0.346871] sun50i-h6-r-pinctrl 7022000.pinctrl: could not request > > pin 352 (PL0) from group PL0 on device 7022000.pinctrl > > [ 0.346878] mv64xxx_i2c 7081400.i2c: Error applying setting, > > reverse things back > > > > PL0 and PL1 are SCK/SDA for the PMIC :( > > How was this DT tested then? There was a mistake when I tested the patch v2 and only saw this after posting the patch. Can I submit a V3 without pio / r_pio regulators ? (+ the yaml patch separa= ted) Thanks, > > Maxime > > -- > Maxime Ripard, Bootlin > Embedded Linux and Kernel engineering > https://bootlin.com