From: Bryan Wu <cooloney@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>
Cc: "rpurdie@rpsys.net" <rpurdie@rpsys.net>,
Linux LED Subsystem <linux-leds@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
Matthew.Fatheree@belkin.com
Subject: Re: [PATCH RESEND v6 0/2] Driver for TI tlc591xx 8/16 Channel i2c LED driver
Date: Mon, 30 Mar 2015 15:10:31 -0700 [thread overview]
Message-ID: <CAK5ve-KZOXUOOfmsbcOBvTeF+wa3PHGmWnigBEBOX1=cKFN_eQ@mail.gmail.com> (raw)
In-Reply-To: <20150329192838.GB24313@lunn.ch>
On Sun, Mar 29, 2015 at 12:28 PM, Andrew Lunn <andrew@lunn.ch> wrote:
> On Tue, Mar 17, 2015 at 11:08:25PM +0100, Andrew Lunn wrote:
>> This patchset is a driver for the TI tlc59116 16 Channel i2c LED
>> driver and tlc59108 8 Channel i2c LED driver. This driver is used on
>> the Belkin WRT1900AC access point and the C code is derived from code
>> Belkin contributed to OpenWRT. However it has been extensively
>> re-written, and a device tree binding added to replace platform data.
>
> Hi Bryan
>
> Do you have any comments on this driver? Anything you would like me to
> do to help get it accepted?
>
Sorry for the delay. I'm reviewing several other patches as well as
working on my internal work.
I will review this soon.
Thanks,
-Bryan
>
>>
>> Cc: Matthew.Fatheree@belkin.com
>>
>> Since v5:
>> Hard code number of LEDs, rather than #define
>> Moved common fields from led into priv
>> Moved reg_ledout into priv, removed helper functions
>> Cache brightness to avoid race conditions
>> tlc591xx_led_set -> tlc591xx_set_brightness
>> Be paranoid with of_match_device() and client->dev.of_node
>>
>> Since v4:
>> Fix Oops on module unload reported by Vignesh R
>>
>> Since v3:
>> Generalized and added support for tlc59108
>> brightness == 0 and brightness == LED_FULL disable PWM and used
>> fixed OFF/ON mode
>>
>> Since v2:
>> Remove incorrect /* Mode register ? */ comment
>> Parenthesis around the macro arguments
>> Converted many signed variables into unsigned
>> Saved an initialization
>>
>>
>> Since v1:
>> s/uint8_t/u8/g
>> Remove empty line
>> Removed #gpio-cells
>> Added select REGMAP_I2C
>> Sorted #includes into alphabetic order
>> Added missing MODULE_DEVICE_TABLE(of, ...)
>> Check return value of regmap_write()
>> Simplified tlc59116_set_mode()
>>
>> Andrew Lunn (2):
>> leds: tlc59116: Document binding for the TI 16 Channel i2c LED driver
>> leds: tlc59116: Driver for the TI 16 Channel i2c LED driver
>>
>> .../devicetree/bindings/leds/leds-tlc59116.txt | 41 ++++
>> drivers/leds/Kconfig | 7 +
>> drivers/leds/Makefile | 1 +
>> drivers/leds/leds-tlc59116.c | 253 +++++++++++++++++++++
>> 4 files changed, 302 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/leds/leds-tlc59116.txt
>> create mode 100644 drivers/leds/leds-tlc59116.c
>>
>> --
>> 2.1.3
next prev parent reply other threads:[~2015-03-30 22:10 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-17 22:08 [PATCH RESEND v6 0/2] Driver for TI tlc591xx 8/16 Channel i2c LED driver Andrew Lunn
2015-03-17 22:08 ` [PATCH RESEND v6 1/2] leds: tlc591xx: Document binding for the TI " Andrew Lunn
2015-04-20 13:09 ` Jacek Anaszewski
2015-04-20 17:46 ` Bryan Wu
2015-03-17 22:08 ` [PATCH RESEND v6 2/2] leds: tlc591xx: Driver " Andrew Lunn
2015-04-20 9:06 ` Jacek Anaszewski
2015-04-20 11:59 ` Andrew Lunn
2015-04-20 13:07 ` Jacek Anaszewski
[not found] ` <5534FA13.9090502-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2015-04-20 17:49 ` Bryan Wu
2015-03-29 19:28 ` [PATCH RESEND v6 0/2] Driver for TI tlc591xx " Andrew Lunn
2015-03-30 22:10 ` Bryan Wu [this message]
2015-08-17 12:11 ` Tomi Valkeinen
2015-08-17 13:27 ` Andrew Lunn
2015-08-17 14:11 ` Tomi Valkeinen
2015-08-17 14:21 ` Andrew Lunn
2015-08-17 16:40 ` Tomi Valkeinen
2015-08-17 16:48 ` Andrew Lunn
2015-08-17 17:08 ` Bryan Wu
2015-08-17 20:47 ` Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAK5ve-KZOXUOOfmsbcOBvTeF+wa3PHGmWnigBEBOX1=cKFN_eQ@mail.gmail.com' \
--to=cooloney@gmail.com \
--cc=Matthew.Fatheree@belkin.com \
--cc=andrew@lunn.ch \
--cc=devicetree@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=rpurdie@rpsys.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).