* [PATCH] h8300: dts: Fix /chosen:stdout-path
@ 2020-03-25 9:53 Geert Uytterhoeven
2020-06-03 5:46 ` Masahiro Yamada
0 siblings, 1 reply; 2+ messages in thread
From: Geert Uytterhoeven @ 2020-03-25 9:53 UTC (permalink / raw)
To: Rob Herring, Yoshinori Sato
Cc: devicetree, uclinux-h8-devel, linux-kernel, Geert Uytterhoeven
arch/h8300/boot/dts/h8s_sim.dts:11.3-25: Warning (chosen_node_stdout_path): /chosen:stdout-path: property is not a string
arch/h8300/boot/dts/h8300h_sim.dts:11.3-25: Warning (chosen_node_stdout_path): /chosen:stdout-path: property is not a string
Drop the angle brackets to fix this.
A similar fix was already applied to arch/h8300/boot/dts/edosk2674.dts
in commit 780ffcd51cb28717 ("h8300: register address fix").
Fixes: 38d6bded13084d50 ("h8300: devicetree source")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/h8300/boot/dts/h8300h_sim.dts | 2 +-
arch/h8300/boot/dts/h8s_sim.dts | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/h8300/boot/dts/h8300h_sim.dts b/arch/h8300/boot/dts/h8300h_sim.dts
index 595398b9d0180a80..e1d4d9b7f6b40c04 100644
--- a/arch/h8300/boot/dts/h8300h_sim.dts
+++ b/arch/h8300/boot/dts/h8300h_sim.dts
@@ -8,7 +8,7 @@
chosen {
bootargs = "earlyprintk=h8300-sim";
- stdout-path = <&sci0>;
+ stdout-path = &sci0;
};
aliases {
serial0 = &sci0;
diff --git a/arch/h8300/boot/dts/h8s_sim.dts b/arch/h8300/boot/dts/h8s_sim.dts
index 932cc3c5a81bcdd2..4848e40e607ecc1d 100644
--- a/arch/h8300/boot/dts/h8s_sim.dts
+++ b/arch/h8300/boot/dts/h8s_sim.dts
@@ -8,7 +8,7 @@
chosen {
bootargs = "earlyprintk=h8300-sim";
- stdout-path = <&sci0>;
+ stdout-path = &sci0;
};
aliases {
serial0 = &sci0;
--
2.17.1
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [PATCH] h8300: dts: Fix /chosen:stdout-path
2020-03-25 9:53 [PATCH] h8300: dts: Fix /chosen:stdout-path Geert Uytterhoeven
@ 2020-06-03 5:46 ` Masahiro Yamada
0 siblings, 0 replies; 2+ messages in thread
From: Masahiro Yamada @ 2020-06-03 5:46 UTC (permalink / raw)
To: Geert Uytterhoeven, Rob Herring
Cc: Yoshinori Sato, DTML, moderated list:H8/300 ARCHITECTURE,
Linux Kernel Mailing List
On Wed, Mar 25, 2020 at 6:53 PM Geert Uytterhoeven
<geert+renesas@glider.be> wrote:
>
> arch/h8300/boot/dts/h8s_sim.dts:11.3-25: Warning (chosen_node_stdout_path): /chosen:stdout-path: property is not a string
> arch/h8300/boot/dts/h8300h_sim.dts:11.3-25: Warning (chosen_node_stdout_path): /chosen:stdout-path: property is not a string
>
> Drop the angle brackets to fix this.
>
> A similar fix was already applied to arch/h8300/boot/dts/edosk2674.dts
> in commit 780ffcd51cb28717 ("h8300: register address fix").
>
> Fixes: 38d6bded13084d50 ("h8300: devicetree source")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Unfortunately, h8300 maintainer is not responding...
How to get this in?
Perhaps, Rob can pick this up?
Thanks.
> ---
> arch/h8300/boot/dts/h8300h_sim.dts | 2 +-
> arch/h8300/boot/dts/h8s_sim.dts | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/h8300/boot/dts/h8300h_sim.dts b/arch/h8300/boot/dts/h8300h_sim.dts
> index 595398b9d0180a80..e1d4d9b7f6b40c04 100644
> --- a/arch/h8300/boot/dts/h8300h_sim.dts
> +++ b/arch/h8300/boot/dts/h8300h_sim.dts
> @@ -8,7 +8,7 @@
>
> chosen {
> bootargs = "earlyprintk=h8300-sim";
> - stdout-path = <&sci0>;
> + stdout-path = &sci0;
> };
> aliases {
> serial0 = &sci0;
> diff --git a/arch/h8300/boot/dts/h8s_sim.dts b/arch/h8300/boot/dts/h8s_sim.dts
> index 932cc3c5a81bcdd2..4848e40e607ecc1d 100644
> --- a/arch/h8300/boot/dts/h8s_sim.dts
> +++ b/arch/h8300/boot/dts/h8s_sim.dts
> @@ -8,7 +8,7 @@
>
> chosen {
> bootargs = "earlyprintk=h8300-sim";
> - stdout-path = <&sci0>;
> + stdout-path = &sci0;
> };
> aliases {
> serial0 = &sci0;
> --
> 2.17.1
>
--
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-06-03 5:47 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-03-25 9:53 [PATCH] h8300: dts: Fix /chosen:stdout-path Geert Uytterhoeven
2020-06-03 5:46 ` Masahiro Yamada
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).