* [PATCH v4 1/3] ARM: uniphier: add outer cache support
2015-09-30 11:01 [PATCH v4 0/3] ARM: uniphier: add outer cache support and rework SMP operations Masahiro Yamada
@ 2015-09-30 11:01 ` Masahiro Yamada
2015-09-30 11:01 ` [PATCH v4 3/3] ARM: dts: uniphier: add outer cache controller nodes Masahiro Yamada
[not found] ` <1443610906-8608-1-git-send-email-yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
2 siblings, 0 replies; 4+ messages in thread
From: Masahiro Yamada @ 2015-09-30 11:01 UTC (permalink / raw)
To: linux-arm-kernel, arm
Cc: Masahiro Yamada, Arnd Bergmann, Jiri Slaby, Linus Walleij,
Kumar Gala, Jungseung Lee, Ian Campbell, Rob Herring,
Thomas Gleixner, Nishanth Menon, Pawel Moll, Greg Kroah-Hartman,
Maxime Coquelin, Andrew Morton, Tomasz Figa, devicetree,
Jiang Liu, Mauro Carvalho Chehab, Russell King, Nathan Lynch,
Kees Cook, Paul Bolle, linux-kernel, David
This commit adds support for UniPhier outer cache controller.
All the UniPhier SoCs are equipped with the L2 cache, while the L3
cache is currently only integrated on PH1-Pro5 SoC.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../bindings/arm/uniphier/cache-uniphier.txt | 60 +++
MAINTAINERS | 2 +
arch/arm/include/asm/hardware/cache-uniphier.h | 46 ++
arch/arm/kernel/irq.c | 3 +
arch/arm/mm/Kconfig | 10 +
arch/arm/mm/Makefile | 1 +
arch/arm/mm/cache-uniphier.c | 554 +++++++++++++++++++++
7 files changed, 676 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/uniphier/cache-uniphier.txt
create mode 100644 arch/arm/include/asm/hardware/cache-uniphier.h
create mode 100644 arch/arm/mm/cache-uniphier.c
diff --git a/Documentation/devicetree/bindings/arm/uniphier/cache-uniphier.txt b/Documentation/devicetree/bindings/arm/uniphier/cache-uniphier.txt
new file mode 100644
index 0000000..668a18f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/uniphier/cache-uniphier.txt
@@ -0,0 +1,60 @@
+UniPhier outer cache controller
+
+UniPhier SoCs are integrated with a full-custom outer cache controller system.
+All of them have a level 2 cache controller, and some have a level 3 cache
+controller as well.
+
+Required properties:
+- compatible: should be "socionext,uniphier-system-cache"
+- reg: offsets and lengths of the register sets for the device. It should
+ contain 3 regions: control register, revision register, operation register,
+ in this order.
+- cache-unified: specifies the cache is a unified cache.
+- cache-size: specifies the size in bytes of the cache
+- cache-sets: specifies the number of associativity sets of the cache
+- cache-line-size: specifies the line size in bytes
+- cache-level: specifies the level in the cache hierarchy. The value should
+ be 2 for L2 cache, 3 for L3 cache, etc.
+
+Optional properties:
+- next-level-cache: phandle to the next level cache if present. The next level
+ cache should be also compatible with "socionext,uniphier-system-cache".
+
+The L2 cache must exist to use the L3 cache; the cache hierarchy must be
+indicated correctly with "next-level-cache" properties.
+
+Example 1 (L2 for outer cache):
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
+ <0x506c0000 0x400>;
+ cache-unified;
+ cache-size = <0x200000>;
+ cache-sets = <512>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ };
+
+Example 2 (L2 and L3 for outer cache):
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
+ <0x506c0000 0x400>;
+ cache-unified;
+ cache-size = <0x200000>;
+ cache-sets = <512>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ next-level-cache = <&l3>;
+ };
+
+ l3: l3-cache@500c8000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c8000 0x2000>, <0x503c8100 0x8>,
+ <0x506c8000 0x400>;
+ cache-unified;
+ cache-size = <0x400000>;
+ cache-sets = <512>;
+ cache-line-size = <256>;
+ cache-level = <3>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 9f6685f..bced05f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1606,7 +1606,9 @@ M: Masahiro Yamada <yamada.masahiro@socionext.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/boot/dts/uniphier*
+F: arch/arm/include/asm/hardware/cache-uniphier.h
F: arch/arm/mach-uniphier/
+F: arch/arm/mm/cache-uniphier.c
F: drivers/pinctrl/uniphier/
F: drivers/tty/serial/8250/8250_uniphier.c
N: uniphier
diff --git a/arch/arm/include/asm/hardware/cache-uniphier.h b/arch/arm/include/asm/hardware/cache-uniphier.h
new file mode 100644
index 0000000..102e3fb
--- /dev/null
+++ b/arch/arm/include/asm/hardware/cache-uniphier.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __CACHE_UNIPHIER_H
+#define __CACHE_UNIPHIER_H
+
+#include <linux/types.h>
+
+#ifdef CONFIG_CACHE_UNIPHIER
+int uniphier_cache_init(void);
+int uniphier_cache_l2_is_enabled(void);
+void uniphier_cache_l2_touch_range(unsigned long start, unsigned long end);
+void uniphier_cache_l2_set_locked_ways(u32 way_mask);
+#else
+static inline int uniphier_cache_init(void)
+{
+ return -ENODEV;
+}
+
+static inline int uniphier_cache_l2_is_enabled(void)
+{
+ return 0;
+}
+
+static inline void uniphier_cache_l2_touch_range(unsigned long start,
+ unsigned long end)
+{
+}
+
+static inline void uniphier_cache_l2_set_locked_ways(u32 way_mask)
+{
+}
+#endif
+
+#endif /* __CACHE_UNIPHIER_H */
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 2766183..1d45320 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -39,6 +39,7 @@
#include <linux/export.h>
#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/cache-uniphier.h>
#include <asm/outercache.h>
#include <asm/exception.h>
#include <asm/mach/arch.h>
@@ -97,6 +98,8 @@ void __init init_IRQ(void)
if (ret)
pr_err("L2C: failed to init: %d\n", ret);
}
+
+ uniphier_cache_init();
}
#ifdef CONFIG_MULTI_IRQ_HANDLER
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index df7537f..a2e74b2 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -986,6 +986,16 @@ config CACHE_TAUROS2
This option enables the Tauros2 L2 cache controller (as
found on PJ1/PJ4).
+config CACHE_UNIPHIER
+ bool "Enable the UniPhier outer cache controller"
+ depends on ARCH_UNIPHIER
+ default y
+ select OUTER_CACHE
+ select OUTER_CACHE_SYNC
+ help
+ This option enables the UniPhier outer cache (system cache)
+ controller.
+
config CACHE_XSC3L2
bool "Enable the L2 cache on XScale3"
depends on CPU_XSC3
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 57c8df5..7f76d96 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -103,3 +103,4 @@ obj-$(CONFIG_CACHE_FEROCEON_L2) += cache-feroceon-l2.o
obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o l2c-l2x0-resume.o
obj-$(CONFIG_CACHE_XSC3L2) += cache-xsc3l2.o
obj-$(CONFIG_CACHE_TAUROS2) += cache-tauros2.o
+obj-$(CONFIG_CACHE_UNIPHIER) += cache-uniphier.o
diff --git a/arch/arm/mm/cache-uniphier.c b/arch/arm/mm/cache-uniphier.c
new file mode 100644
index 0000000..94f08a3
--- /dev/null
+++ b/arch/arm/mm/cache-uniphier.c
@@ -0,0 +1,554 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) "uniphier: " fmt
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/log2.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <asm/hardware/cache-uniphier.h>
+#include <asm/outercache.h>
+
+/* control registers */
+#define UNIPHIER_SSCC 0x0 /* Control Register */
+#define UNIPHIER_SSCC_BST BIT(20) /* UCWG burst read */
+#define UNIPHIER_SSCC_ACT BIT(19) /* Inst-Data separate */
+#define UNIPHIER_SSCC_WTG BIT(18) /* WT gathering on */
+#define UNIPHIER_SSCC_PRD BIT(17) /* enable pre-fetch */
+#define UNIPHIER_SSCC_ON BIT(0) /* enable cache */
+#define UNIPHIER_SSCLPDAWCR 0x30 /* Unified/Data Active Way Control */
+#define UNIPHIER_SSCLPIAWCR 0x34 /* Instruction Active Way Control */
+
+/* revision registers */
+#define UNIPHIER_SSCID 0x0 /* ID Register */
+
+/* operation registers */
+#define UNIPHIER_SSCOPE 0x244 /* Cache Operation Primitive Entry */
+#define UNIPHIER_SSCOPE_CM_INV 0x0 /* invalidate */
+#define UNIPHIER_SSCOPE_CM_CLEAN 0x1 /* clean */
+#define UNIPHIER_SSCOPE_CM_FLUSH 0x2 /* flush */
+#define UNIPHIER_SSCOPE_CM_SYNC 0x8 /* sync (drain bufs) */
+#define UNIPHIER_SSCOPE_CM_FLUSH_PREFETCH 0x9 /* flush p-fetch buf */
+#define UNIPHIER_SSCOQM 0x248 /* Cache Operation Queue Mode */
+#define UNIPHIER_SSCOQM_TID_MASK (0x3 << 21)
+#define UNIPHIER_SSCOQM_TID_LRU_DATA (0x0 << 21)
+#define UNIPHIER_SSCOQM_TID_LRU_INST (0x1 << 21)
+#define UNIPHIER_SSCOQM_TID_WAY (0x2 << 21)
+#define UNIPHIER_SSCOQM_S_MASK (0x3 << 17)
+#define UNIPHIER_SSCOQM_S_RANGE (0x0 << 17)
+#define UNIPHIER_SSCOQM_S_ALL (0x1 << 17)
+#define UNIPHIER_SSCOQM_S_WAY (0x2 << 17)
+#define UNIPHIER_SSCOQM_CE BIT(15) /* notify completion */
+#define UNIPHIER_SSCOQM_CM_INV 0x0 /* invalidate */
+#define UNIPHIER_SSCOQM_CM_CLEAN 0x1 /* clean */
+#define UNIPHIER_SSCOQM_CM_FLUSH 0x2 /* flush */
+#define UNIPHIER_SSCOQM_CM_PREFETCH 0x3 /* prefetch to cache */
+#define UNIPHIER_SSCOQM_CM_PREFETCH_BUF 0x4 /* prefetch to pf-buf */
+#define UNIPHIER_SSCOQM_CM_TOUCH 0x5 /* touch */
+#define UNIPHIER_SSCOQM_CM_TOUCH_ZERO 0x6 /* touch to zero */
+#define UNIPHIER_SSCOQM_CM_TOUCH_DIRTY 0x7 /* touch with dirty */
+#define UNIPHIER_SSCOQAD 0x24c /* Cache Operation Queue Address */
+#define UNIPHIER_SSCOQSZ 0x250 /* Cache Operation Queue Size */
+#define UNIPHIER_SSCOQMASK 0x254 /* Cache Operation Queue Address Mask */
+#define UNIPHIER_SSCOQWN 0x258 /* Cache Operation Queue Way Number */
+#define UNIPHIER_SSCOPPQSEF 0x25c /* Cache Operation Queue Set Complete*/
+#define UNIPHIER_SSCOPPQSEF_FE BIT(1)
+#define UNIPHIER_SSCOPPQSEF_OE BIT(0)
+#define UNIPHIER_SSCOLPQS 0x260 /* Cache Operation Queue Status */
+#define UNIPHIER_SSCOLPQS_EF BIT(2)
+#define UNIPHIER_SSCOLPQS_EST BIT(1)
+#define UNIPHIER_SSCOLPQS_QST BIT(0)
+
+/* Is the touch/pre-fetch destination specified by ways? */
+#define UNIPHIER_SSCOQM_TID_IS_WAY(op) \
+ ((op & UNIPHIER_SSCOQM_TID_MASK) == UNIPHIER_SSCOQM_TID_WAY)
+/* Is the operation region specified by address range? */
+#define UNIPHIER_SSCOQM_S_IS_RANGE(op) \
+ ((op & UNIPHIER_SSCOQM_S_MASK) == UNIPHIER_SSCOQM_S_RANGE)
+
+/**
+ * uniphier_cache_data - UniPhier outer cache specific data
+ *
+ * @ctrl_base: virtual base address of control registers
+ * @rev_base: virtual base address of revision registers
+ * @op_base: virtual base address of operation registers
+ * @way_present_mask: each bit specifies if the way is present
+ * @way_locked_mask: each bit specifies if the way is locked
+ * @nsets: number of associativity sets
+ * @line_size: line size in bytes
+ * @range_op_max_size: max size that can be handled by a single range operation
+ * @list: list node to include this level in the whole cache hierarchy
+ */
+struct uniphier_cache_data {
+ void __iomem *ctrl_base;
+ void __iomem *rev_base;
+ void __iomem *op_base;
+ u32 way_present_mask;
+ u32 way_locked_mask;
+ u32 nsets;
+ u32 line_size;
+ u32 range_op_max_size;
+ struct list_head list;
+};
+
+/*
+ * List of the whole outer cache hierarchy. This list is only modified during
+ * the early boot stage, so no mutex is taken for the access to the list.
+ */
+static LIST_HEAD(uniphier_cache_list);
+
+/**
+ * __uniphier_cache_sync - perform a sync point for a particular cache level
+ *
+ * @data: cache controller specific data
+ */
+static void __uniphier_cache_sync(struct uniphier_cache_data *data)
+{
+ /* This sequence need not be atomic. Do not disable IRQ. */
+ writel_relaxed(UNIPHIER_SSCOPE_CM_SYNC,
+ data->op_base + UNIPHIER_SSCOPE);
+ /* need a read back to confirm */
+ readl_relaxed(data->op_base + UNIPHIER_SSCOPE);
+}
+
+/**
+ * __uniphier_cache_maint_common - run a queue operation for a particular level
+ *
+ * @data: cache controller specific data
+ * @start: start address of range operation (don't care for "all" operation)
+ * @size: data size of range operation (don't care for "all" operation)
+ * @operation: flags to specify the desired cache operation
+ */
+static void __uniphier_cache_maint_common(struct uniphier_cache_data *data,
+ unsigned long start,
+ unsigned long size,
+ u32 operation)
+{
+ unsigned long flags;
+
+ /*
+ * No spin lock is necessary here because:
+ *
+ * [1] This outer cache controller is able to accept maintenance
+ * operations from multiple CPUs at a time in an SMP system; if a
+ * maintenance operation is under way and another operation is issued,
+ * the new one is stored in the queue. The controller performs one
+ * operation after another. If the queue is full, the status register,
+ * UNIPHIER_SSCOPPQSEF, indicates that the queue registration has
+ * failed. The status registers, UNIPHIER_{SSCOPPQSEF, SSCOLPQS}, have
+ * different instances for each CPU, i.e. each CPU can track the status
+ * of the maintenance operations triggered by itself.
+ *
+ * [2] The cache command registers, UNIPHIER_{SSCOQM, SSCOQAD, SSCOQSZ,
+ * SSCOQWN}, are shared between multiple CPUs, but the hardware still
+ * guarantees the registration sequence is atomic; the write access to
+ * them are arbitrated by the hardware. The first accessor to the
+ * register, UNIPHIER_SSCOQM, holds the access right and it is released
+ * by reading the status register, UNIPHIER_SSCOPPQSEF. While one CPU
+ * is holding the access right, other CPUs fail to register operations.
+ * One CPU should not hold the access right for a long time, so local
+ * IRQs should be disabled while the following sequence.
+ */
+ local_irq_save(flags);
+
+ /* clear the complete notification flag */
+ writel_relaxed(UNIPHIER_SSCOLPQS_EF, data->op_base + UNIPHIER_SSCOLPQS);
+
+ do {
+ /* set cache operation */
+ writel_relaxed(UNIPHIER_SSCOQM_CE | operation,
+ data->op_base + UNIPHIER_SSCOQM);
+
+ /* set address range if needed */
+ if (likely(UNIPHIER_SSCOQM_S_IS_RANGE(operation))) {
+ writel_relaxed(start, data->op_base + UNIPHIER_SSCOQAD);
+ writel_relaxed(size, data->op_base + UNIPHIER_SSCOQSZ);
+ }
+
+ /* set target ways if needed */
+ if (unlikely(UNIPHIER_SSCOQM_TID_IS_WAY(operation)))
+ writel_relaxed(data->way_locked_mask,
+ data->op_base + UNIPHIER_SSCOQWN);
+ } while (unlikely(readl_relaxed(data->op_base + UNIPHIER_SSCOPPQSEF) &
+ (UNIPHIER_SSCOPPQSEF_FE | UNIPHIER_SSCOPPQSEF_OE)));
+
+ /* wait until the operation is completed */
+ while (likely(readl_relaxed(data->op_base + UNIPHIER_SSCOLPQS) !=
+ UNIPHIER_SSCOLPQS_EF))
+ cpu_relax();
+
+ local_irq_restore(flags);
+}
+
+static void __uniphier_cache_maint_all(struct uniphier_cache_data *data,
+ u32 operation)
+{
+ __uniphier_cache_maint_common(data, 0, 0,
+ UNIPHIER_SSCOQM_S_ALL | operation);
+
+ __uniphier_cache_sync(data);
+}
+
+static void __uniphier_cache_maint_range(struct uniphier_cache_data *data,
+ unsigned long start, unsigned long end,
+ u32 operation)
+{
+ unsigned long size;
+
+ /*
+ * If the start address is not aligned,
+ * perform a cache operation for the first cache-line
+ */
+ start = start & ~(data->line_size - 1);
+
+ size = end - start;
+
+ if (unlikely(size >= (unsigned long)(-data->line_size))) {
+ /* this means cache operation for all range */
+ __uniphier_cache_maint_all(data, operation);
+ return;
+ }
+
+ /*
+ * If the end address is not aligned,
+ * perform a cache operation for the last cache-line
+ */
+ size = ALIGN(size, data->line_size);
+
+ while (size) {
+ unsigned long chunk_size = min_t(unsigned long, size,
+ data->range_op_max_size);
+
+ __uniphier_cache_maint_common(data, start, chunk_size,
+ UNIPHIER_SSCOQM_S_RANGE | operation);
+
+ start += chunk_size;
+ size -= chunk_size;
+ }
+
+ __uniphier_cache_sync(data);
+}
+
+static void __uniphier_cache_enable(struct uniphier_cache_data *data, bool on)
+{
+ u32 val = 0;
+
+ if (on)
+ val = UNIPHIER_SSCC_WTG | UNIPHIER_SSCC_PRD | UNIPHIER_SSCC_ON;
+
+ writel_relaxed(val, data->ctrl_base + UNIPHIER_SSCC);
+}
+
+static void __uniphier_cache_set_locked_ways(struct uniphier_cache_data *data,
+ u32 way_mask)
+{
+ data->way_locked_mask = way_mask & data->way_present_mask;
+
+ writel_relaxed(~data->way_locked_mask & data->way_present_mask,
+ data->ctrl_base + UNIPHIER_SSCLPDAWCR);
+}
+
+static void uniphier_cache_maint_range(unsigned long start, unsigned long end,
+ u32 operation)
+{
+ struct uniphier_cache_data *data;
+
+ list_for_each_entry(data, &uniphier_cache_list, list)
+ __uniphier_cache_maint_range(data, start, end, operation);
+}
+
+static void uniphier_cache_maint_all(u32 operation)
+{
+ struct uniphier_cache_data *data;
+
+ list_for_each_entry(data, &uniphier_cache_list, list)
+ __uniphier_cache_maint_all(data, operation);
+}
+
+static void uniphier_cache_inv_range(unsigned long start, unsigned long end)
+{
+ uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_INV);
+}
+
+static void uniphier_cache_clean_range(unsigned long start, unsigned long end)
+{
+ uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_CLEAN);
+}
+
+static void uniphier_cache_flush_range(unsigned long start, unsigned long end)
+{
+ uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_FLUSH);
+}
+
+static void __init uniphier_cache_inv_all(void)
+{
+ uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_INV);
+}
+
+static void uniphier_cache_flush_all(void)
+{
+ uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_FLUSH);
+}
+
+static void uniphier_cache_disable(void)
+{
+ struct uniphier_cache_data *data;
+
+ list_for_each_entry_reverse(data, &uniphier_cache_list, list)
+ __uniphier_cache_enable(data, false);
+
+ uniphier_cache_flush_all();
+}
+
+static void __init uniphier_cache_enable(void)
+{
+ struct uniphier_cache_data *data;
+
+ uniphier_cache_inv_all();
+
+ list_for_each_entry(data, &uniphier_cache_list, list) {
+ __uniphier_cache_enable(data, true);
+ __uniphier_cache_set_locked_ways(data, 0);
+ }
+}
+
+static void uniphier_cache_sync(void)
+{
+ struct uniphier_cache_data *data;
+
+ list_for_each_entry(data, &uniphier_cache_list, list)
+ __uniphier_cache_sync(data);
+}
+
+int __init uniphier_cache_l2_is_enabled(void)
+{
+ struct uniphier_cache_data *data;
+
+ data = list_first_entry_or_null(&uniphier_cache_list,
+ struct uniphier_cache_data, list);
+ if (!data)
+ return 0;
+
+ return !!(readl_relaxed(data->ctrl_base + UNIPHIER_SSCC) &
+ UNIPHIER_SSCC_ON);
+}
+
+void __init uniphier_cache_l2_touch_range(unsigned long start,
+ unsigned long end)
+{
+ struct uniphier_cache_data *data;
+
+ data = list_first_entry_or_null(&uniphier_cache_list,
+ struct uniphier_cache_data, list);
+ if (data)
+ __uniphier_cache_maint_range(data, start, end,
+ UNIPHIER_SSCOQM_TID_WAY |
+ UNIPHIER_SSCOQM_CM_TOUCH);
+}
+
+void __init uniphier_cache_l2_set_locked_ways(u32 way_mask)
+{
+ struct uniphier_cache_data *data;
+
+ data = list_first_entry_or_null(&uniphier_cache_list,
+ struct uniphier_cache_data, list);
+ if (data)
+ __uniphier_cache_set_locked_ways(data, way_mask);
+}
+
+static const struct of_device_id uniphier_cache_match[] __initconst = {
+ {
+ .compatible = "socionext,uniphier-system-cache",
+ },
+ { /* sentinel */ }
+};
+
+static struct device_node * __init uniphier_cache_get_next_level_node(
+ struct device_node *np)
+{
+ u32 phandle;
+
+ if (of_property_read_u32(np, "next-level-cache", &phandle))
+ return NULL;
+
+ return of_find_node_by_phandle(phandle);
+}
+
+static int __init __uniphier_cache_init(struct device_node *np,
+ unsigned int *cache_level)
+{
+ struct uniphier_cache_data *data;
+ u32 level, cache_size;
+ struct device_node *next_np;
+ int ret = 0;
+
+ if (!of_match_node(uniphier_cache_match, np)) {
+ pr_err("L%d: not compatible with uniphier cache\n",
+ *cache_level);
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32(np, "cache-level", &level)) {
+ pr_err("L%d: cache-level is not specified\n", *cache_level);
+ return -EINVAL;
+ }
+
+ if (level != *cache_level) {
+ pr_err("L%d: cache-level is unexpected value %d\n",
+ *cache_level, level);
+ return -EINVAL;
+ }
+
+ if (!of_property_read_bool(np, "cache-unified")) {
+ pr_err("L%d: cache-unified is not specified\n", *cache_level);
+ return -EINVAL;
+ }
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ if (of_property_read_u32(np, "cache-line-size", &data->line_size) ||
+ !is_power_of_2(data->line_size)) {
+ pr_err("L%d: cache-line-size is unspecified or invalid\n",
+ *cache_level);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ if (of_property_read_u32(np, "cache-sets", &data->nsets) ||
+ !is_power_of_2(data->nsets)) {
+ pr_err("L%d: cache-sets is unspecified or invalid\n",
+ *cache_level);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ if (of_property_read_u32(np, "cache-size", &cache_size) ||
+ cache_size == 0 || cache_size % (data->nsets * data->line_size)) {
+ pr_err("L%d: cache-size is unspecified or invalid\n",
+ *cache_level);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ data->way_present_mask =
+ ((u32)1 << cache_size / data->nsets / data->line_size) - 1;
+
+ data->ctrl_base = of_iomap(np, 0);
+ if (!data->ctrl_base) {
+ pr_err("L%d: failed to map control register\n", *cache_level);
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ data->rev_base = of_iomap(np, 1);
+ if (!data->rev_base) {
+ pr_err("L%d: failed to map revision register\n", *cache_level);
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ data->op_base = of_iomap(np, 2);
+ if (!data->op_base) {
+ pr_err("L%d: failed to map operation register\n", *cache_level);
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ if (*cache_level == 2) {
+ u32 revision = readl(data->rev_base + UNIPHIER_SSCID);
+ /*
+ * The size of range operation is limited to (1 << 22) or less
+ * for PH-sLD8 or older SoCs.
+ */
+ if (revision <= 0x16)
+ data->range_op_max_size = (u32)1 << 22;
+ }
+
+ data->range_op_max_size -= data->line_size;
+
+ INIT_LIST_HEAD(&data->list);
+ list_add_tail(&data->list, &uniphier_cache_list); /* no mutex */
+
+ /*
+ * OK, this level has been successfully initialized. Look for the next
+ * level cache. Do not roll back even if the initialization of the
+ * next level cache fails because we want to continue with available
+ * cache levels.
+ */
+ next_np = uniphier_cache_get_next_level_node(np);
+ if (next_np) {
+ (*cache_level)++;
+ ret = __uniphier_cache_init(next_np, cache_level);
+ }
+ of_node_put(next_np);
+
+ return ret;
+err:
+ iounmap(data->op_base);
+ iounmap(data->rev_base);
+ iounmap(data->ctrl_base);
+ kfree(data);
+
+ return ret;
+}
+
+int __init uniphier_cache_init(void)
+{
+ struct device_node *np = NULL;
+ unsigned int cache_level;
+ int ret = 0;
+
+ /* look for level 2 cache */
+ while ((np = of_find_matching_node(np, uniphier_cache_match)))
+ if (!of_property_read_u32(np, "cache-level", &cache_level) &&
+ cache_level == 2)
+ break;
+
+ if (!np)
+ return -ENODEV;
+
+ ret = __uniphier_cache_init(np, &cache_level);
+ of_node_put(np);
+
+ if (ret) {
+ /*
+ * Error out iif L2 initialization fails. Continue with any
+ * error on L3 or outer because they are optional.
+ */
+ if (cache_level == 2) {
+ pr_err("failed to initialize L2 cache\n");
+ return ret;
+ }
+
+ cache_level--;
+ ret = 0;
+ }
+
+ outer_cache.inv_range = uniphier_cache_inv_range;
+ outer_cache.clean_range = uniphier_cache_clean_range;
+ outer_cache.flush_range = uniphier_cache_flush_range;
+ outer_cache.flush_all = uniphier_cache_flush_all;
+ outer_cache.disable = uniphier_cache_disable;
+ outer_cache.sync = uniphier_cache_sync;
+
+ uniphier_cache_enable();
+
+ pr_info("enabled outer cache (cache level: %d)\n", cache_level);
+
+ return ret;
+}
--
1.9.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH v4 3/3] ARM: dts: uniphier: add outer cache controller nodes
2015-09-30 11:01 [PATCH v4 0/3] ARM: uniphier: add outer cache support and rework SMP operations Masahiro Yamada
2015-09-30 11:01 ` [PATCH v4 1/3] ARM: uniphier: add outer cache support Masahiro Yamada
@ 2015-09-30 11:01 ` Masahiro Yamada
[not found] ` <1443610906-8608-1-git-send-email-yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
2 siblings, 0 replies; 4+ messages in thread
From: Masahiro Yamada @ 2015-09-30 11:01 UTC (permalink / raw)
To: linux-arm-kernel, arm
Cc: Masahiro Yamada, Russell King, devicetree, Kumar Gala,
linux-kernel, Ian Campbell, Rob Herring, Pawel Moll, Mark Rutland
Add L2 cache controller nodes for all the UniPhier SoC DTSI.
Also, add an L3 cache controller node for PH1-Pro5 DTSI.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---
arch/arm/boot/dts/uniphier-ph1-ld4.dtsi | 13 +++++++++++++
arch/arm/boot/dts/uniphier-ph1-pro4.dtsi | 14 ++++++++++++++
arch/arm/boot/dts/uniphier-ph1-pro5.dtsi | 27 +++++++++++++++++++++++++++
arch/arm/boot/dts/uniphier-ph1-sld3.dtsi | 14 ++++++++++++++
arch/arm/boot/dts/uniphier-ph1-sld8.dtsi | 13 +++++++++++++
arch/arm/boot/dts/uniphier-proxstream2.dtsi | 16 ++++++++++++++++
6 files changed, 97 insertions(+)
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
index a6a185f..ae13469 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
@@ -55,6 +55,7 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ next-level-cache = <&l2>;
};
};
@@ -91,6 +92,18 @@
#size-cells = <1>;
};
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+ <0x506c0000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>;
+ cache-unified;
+ cache-size = <(512 * 1024)>;
+ cache-sets = <256>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
index e8bbc45..85377b2 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
@@ -56,12 +56,14 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ next-level-cache = <&l2>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
+ next-level-cache = <&l2>;
};
};
@@ -98,6 +100,18 @@
#size-cells = <1>;
};
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+ <0x506c0000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>;
+ cache-unified;
+ cache-size = <(768 * 1024)>;
+ cache-sets = <256>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi
index 59c2b12..96da01e 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi
@@ -56,12 +56,14 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ next-level-cache = <&l2>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
+ next-level-cache = <&l2>;
};
};
@@ -98,6 +100,31 @@
#size-cells = <1>;
};
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
+ <0x506c0000 0x400>;
+ interrupts = <0 190 4>, <0 191 4>;
+ cache-unified;
+ cache-size = <(2 * 1024 * 1024)>;
+ cache-sets = <512>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ next-level-cache = <&l3>;
+ };
+
+ l3: l3-cache@500c8000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c8000 0x2000>, <0x503c8100 0x8>,
+ <0x506c8000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>;
+ cache-unified;
+ cache-size = <(2 * 1024 * 1024)>;
+ cache-sets = <512>;
+ cache-line-size = <256>;
+ cache-level = <3>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
index 3cc90cd..945b37f 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
@@ -56,12 +56,14 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ next-level-cache = <&l2>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
+ next-level-cache = <&l2>;
};
};
@@ -120,6 +122,18 @@
<0x20000100 0x100>;
};
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+ <0x506c0000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>;
+ cache-unified;
+ cache-size = <(512 * 1024)>;
+ cache-sets = <256>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
index 58067df..c98428c 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
@@ -55,6 +55,7 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ next-level-cache = <&l2>;
};
};
@@ -91,6 +92,18 @@
#size-cells = <1>;
};
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+ <0x506c0000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>;
+ cache-unified;
+ cache-size = <(256 * 1024)>;
+ cache-sets = <256>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
diff --git a/arch/arm/boot/dts/uniphier-proxstream2.dtsi b/arch/arm/boot/dts/uniphier-proxstream2.dtsi
index 4c7b246..ad5fb39 100644
--- a/arch/arm/boot/dts/uniphier-proxstream2.dtsi
+++ b/arch/arm/boot/dts/uniphier-proxstream2.dtsi
@@ -56,24 +56,28 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ next-level-cache = <&l2>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
+ next-level-cache = <&l2>;
};
cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <2>;
+ next-level-cache = <&l2>;
};
cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <3>;
+ next-level-cache = <&l2>;
};
};
@@ -110,6 +114,18 @@
#size-cells = <1>;
};
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+ <0x506c0000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>;
+ cache-unified;
+ cache-size = <(1280 * 1024)>;
+ cache-sets = <512>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
--
1.9.1
^ permalink raw reply related [flat|nested] 4+ messages in thread