[PATCH 1/6] dt-bindings: iio: dac: ad5791: Add optional reset, clr and ldac gpios

[PATCH 1/6] dt-bindings: iio: dac: ad5791: Add optional reset, clr and ldac gpios

[ahaslam]

From: Axel Haslam <ahaslam@baylibre.com>

Depending on board layout, the ad57xx may need control of reset, clear,
and ldac pins by the host driver. Add optional bindings for these gpios.

Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
---
 .../devicetree/bindings/iio/dac/adi,ad5791.yaml   | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
index c81285d84db7..fe664378c966 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
@@ -31,6 +31,17 @@ properties:
       gain of two configuration.
     type: boolean
 
+  reset-gpios:
+    maxItems: 1
+
+  clear-gpios:
+    maxItems: 1
+
+  ldac-gpios:
+    description:
+      LDAC pin to be used as a hardware trigger to update the DAC channels.
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -44,6 +55,7 @@ unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -53,6 +65,9 @@ examples:
             reg = <0>;
             vss-supply = <&dac_vss>;
             vdd-supply = <&dac_vdd>;
+            reset-gpios = <&gpio_bd 16 GPIO_ACTIVE_LOW>;
+            clear-gpios = <&gpio_bd 17 GPIO_ACTIVE_LOW>;
+            ldac-gpios = <&gpio_bd 18 GPIO_ACTIVE_HIGH>;
         };
     };
 ...
-- 
2.34.1

Re: [PATCH 1/6] dt-bindings: iio: dac: ad5791: Add optional reset, clr and ldac gpios

[Krzysztof Kozlowski]

On Mon, Oct 28, 2024 at 08:11:13AM +0100, ahaslam@baylibre.com wrote:
> From: Axel Haslam <ahaslam@baylibre.com>
> 
> Depending on board layout, the ad57xx may need control of reset, clear,
> and ldac pins by the host driver. Add optional bindings for these gpios.
> 
> Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
> ---
>  .../devicetree/bindings/iio/dac/adi,ad5791.yaml   | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

[PATCH 0/6] Improvements and Enhancements for AD5791 DAC Driver

[ahaslam]

From: Axel Haslam <ahaslam@baylibre.com>

These patches aim to improve on the ad5791 driver:
 - make use of chip_info / match tables, and drop device enum id.
 - Add reset, clr and ldac gpios that have to be set to the correct level in case they
   are not hardwired on the setup/PCB.
 - simplify probe by using the devm_* functions to automatically free resources.
---
Changes in v2:
- Fix probe error print using uninitialized ret.
- Add documentation for new struct parameters
- Add review-by tags to device tree bindings
- Link to V1: https://lore.kernel.org/all/CAKXjFTPwN2TYW6sq1kj3miZ0f5OqKX0aTk8eGf1sj9TBk1_e=A@mail.gmail.com/T/

Axel Haslam (6):
  dt-bindings: iio: dac: ad5791: Add optional reset, clr and ldac gpios
  dt-bindings: iio: dac: ad5791: Add required voltage supplies
  iio: dac: ad5791: Include chip_info in device match tables
  iio: dac: ad5791: Add reset, clr and ldac gpios
  iio: dac: ad5791: Use devm_regulator_get_enable_read_voltage
  iio: dac: ad5791: Use devm_iio_device_register

 .../bindings/iio/dac/adi,ad5791.yaml          |  39 ++++
 drivers/iio/dac/ad5791.c                      | 203 ++++++++----------
 2 files changed, 131 insertions(+), 111 deletions(-)

-- 
2.34.1

[PATCH 1/6] dt-bindings: iio: dac: ad5791: Add optional reset, clr and ldac gpios

[ahaslam]

From: Axel Haslam <ahaslam@baylibre.com>

Depending on board layout, the ad57xx may need control of reset, clear,
and ldac pins by the host driver. Add optional bindings for these gpios.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
---
 .../devicetree/bindings/iio/dac/adi,ad5791.yaml   | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
index c81285d84db7..fe664378c966 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
@@ -31,6 +31,17 @@ properties:
       gain of two configuration.
     type: boolean
 
+  reset-gpios:
+    maxItems: 1
+
+  clear-gpios:
+    maxItems: 1
+
+  ldac-gpios:
+    description:
+      LDAC pin to be used as a hardware trigger to update the DAC channels.
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -44,6 +55,7 @@ unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -53,6 +65,9 @@ examples:
             reg = <0>;
             vss-supply = <&dac_vss>;
             vdd-supply = <&dac_vdd>;
+            reset-gpios = <&gpio_bd 16 GPIO_ACTIVE_LOW>;
+            clear-gpios = <&gpio_bd 17 GPIO_ACTIVE_LOW>;
+            ldac-gpios = <&gpio_bd 18 GPIO_ACTIVE_HIGH>;
         };
     };
 ...
-- 
2.34.1

[PATCH 2/6] dt-bindings: iio: dac: ad5791: Add required voltage supplies

[ahaslam]

From: Axel Haslam <ahaslam@baylibre.com>

Vcc, iovcc, vrefp, and vrefn are needed for the DAC to work.
Add them as required bindings for ad5791.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
---
 .../bindings/iio/dac/adi,ad5791.yaml          | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
index fe664378c966..79cb4b78a88a 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
@@ -26,6 +26,22 @@ properties:
   vdd-supply: true
   vss-supply: true
 
+  vcc-supply:
+    description:
+      Supply that powers the chip.
+
+  iovcc-supply:
+    description:
+      Supply for the digital interface.
+
+  vrefp-supply:
+    description:
+      Positive referance input voltage range. From 5v to (vdd - 2.5)
+
+  vrefn-supply:
+    description:
+      Negative referance input voltage range. From (vss + 2.5) to 0.
+
   adi,rbuf-gain2-en:
     description: Specify to allow an external amplifier to be connected in a
       gain of two configuration.
@@ -47,6 +63,10 @@ required:
   - reg
   - vdd-supply
   - vss-supply
+  - vcc-supply
+  - iovcc-supply
+  - vrefp-supply
+  - vrefn-supply
 
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
@@ -65,6 +85,10 @@ examples:
             reg = <0>;
             vss-supply = <&dac_vss>;
             vdd-supply = <&dac_vdd>;
+            vcc-supply = <&dac_vcc>;
+            iovcc-supply = <&dac_iovcc>;
+            vrefp-supply = <&dac_vrefp>;
+            vrefn-supply = <&dac_vrefn>;
             reset-gpios = <&gpio_bd 16 GPIO_ACTIVE_LOW>;
             clear-gpios = <&gpio_bd 17 GPIO_ACTIVE_LOW>;
             ldac-gpios = <&gpio_bd 18 GPIO_ACTIVE_HIGH>;
-- 
2.34.1

[PATCH 3/6] iio: dac: ad5791: Include chip_info in device match tables

[ahaslam]

From: Axel Haslam <ahaslam@baylibre.com>

Include a chip info struct in device SPI and device OF match tables to
provide channel definitions for each particular ADC model and drop
device enum.

Suggested-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
---
 drivers/iio/dac/ad5791.c | 110 +++++++++++++++++++--------------------
 1 file changed, 53 insertions(+), 57 deletions(-)

diff --git a/drivers/iio/dac/ad5791.c b/drivers/iio/dac/ad5791.c
index 553431bf0232..f6b9a40241f3 100644
--- a/drivers/iio/dac/ad5791.c
+++ b/drivers/iio/dac/ad5791.c
@@ -61,11 +61,14 @@
 
 /**
  * struct ad5791_chip_info - chip specific information
+ * @name:		name of the dac chip
+ * @channel:		channel specification
  * @get_lin_comp:	function pointer to the device specific function
  */
-
 struct ad5791_chip_info {
-	int (*get_lin_comp)	(unsigned int span);
+	const char *name;
+	const struct iio_chan_spec channel;
+	int (*get_lin_comp)(unsigned int span);
 };
 
 /**
@@ -98,13 +101,6 @@ struct ad5791_state {
 	} data[3] __aligned(IIO_DMA_MINALIGN);
 };
 
-enum ad5791_supported_device_ids {
-	ID_AD5760,
-	ID_AD5780,
-	ID_AD5781,
-	ID_AD5791,
-};
-
 static int ad5791_spi_write(struct ad5791_state *st, u8 addr, u32 val)
 {
 	st->data[0].d32 = cpu_to_be32(AD5791_CMD_WRITE |
@@ -228,20 +224,6 @@ static int ad5780_get_lin_comp(unsigned int span)
 	else
 		return AD5780_LINCOMP_10_20;
 }
-static const struct ad5791_chip_info ad5791_chip_info_tbl[] = {
-	[ID_AD5760] = {
-		.get_lin_comp = ad5780_get_lin_comp,
-	},
-	[ID_AD5780] = {
-		.get_lin_comp = ad5780_get_lin_comp,
-	},
-	[ID_AD5781] = {
-		.get_lin_comp = ad5791_get_lin_comp,
-	},
-	[ID_AD5791] = {
-		.get_lin_comp = ad5791_get_lin_comp,
-	},
-};
 
 static int ad5791_read_raw(struct iio_dev *indio_dev,
 			   struct iio_chan_spec const *chan,
@@ -289,30 +271,34 @@ static const struct iio_chan_spec_ext_info ad5791_ext_info[] = {
 	{ },
 };
 
-#define AD5791_CHAN(bits, _shift) {			\
-	.type = IIO_VOLTAGE,				\
-	.output = 1,					\
-	.indexed = 1,					\
-	.address = AD5791_ADDR_DAC0,			\
-	.channel = 0,					\
-	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	\
-	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |	\
-		BIT(IIO_CHAN_INFO_OFFSET),		\
-	.scan_type = {					\
-		.sign = 'u',				\
-		.realbits = (bits),			\
-		.storagebits = 24,			\
-		.shift = (_shift),			\
-	},						\
-	.ext_info = ad5791_ext_info,			\
+#define AD5791_DEFINE_CHIP_INFO(_name, bits, _shift, _lin_comp)		\
+static const struct ad5791_chip_info _name##_chip_info = {		\
+	.name = #_name,							\
+	.get_lin_comp = &(_lin_comp),					\
+	.channel = {							\
+			.type = IIO_VOLTAGE,				\
+			.output = 1,					\
+			.indexed = 1,					\
+			.address = AD5791_ADDR_DAC0,			\
+			.channel = 0,					\
+			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	\
+			.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |	\
+				BIT(IIO_CHAN_INFO_OFFSET),		\
+			.scan_type = {					\
+				.sign = 'u',				\
+				.realbits = (bits),			\
+				.storagebits = 24,			\
+				.shift = (_shift),			\
+			},						\
+			.ext_info = ad5791_ext_info,			\
+	},								\
 }
 
-static const struct iio_chan_spec ad5791_channels[] = {
-	[ID_AD5760] = AD5791_CHAN(16, 4),
-	[ID_AD5780] = AD5791_CHAN(18, 2),
-	[ID_AD5781] = AD5791_CHAN(18, 2),
-	[ID_AD5791] = AD5791_CHAN(20, 0)
-};
+AD5791_DEFINE_CHIP_INFO(ad5760, 16, 4, ad5780_get_lin_comp);
+AD5791_DEFINE_CHIP_INFO(ad5780, 18, 2, ad5780_get_lin_comp);
+AD5791_DEFINE_CHIP_INFO(ad5781, 18, 2, ad5791_get_lin_comp);
+AD5791_DEFINE_CHIP_INFO(ad5790, 20, 0, ad5791_get_lin_comp);
+AD5791_DEFINE_CHIP_INFO(ad5791, 20, 0, ad5791_get_lin_comp);
 
 static int ad5791_write_raw(struct iio_dev *indio_dev,
 			    struct iio_chan_spec const *chan,
@@ -400,9 +386,9 @@ static int ad5791_probe(struct spi_device *spi)
 	if (ret)
 		goto error_disable_reg_neg;
 
-	st->chip_info =	&ad5791_chip_info_tbl[spi_get_device_id(spi)
-					      ->driver_data];
-
+	st->chip_info = spi_get_device_match_data(spi);
+	if (!st->chip_info)
+		return dev_err_probe(&spi->dev, -EINVAL, "no chip info\n");
 
 	st->ctrl = AD5761_CTRL_LINCOMP(st->chip_info->get_lin_comp(st->vref_mv))
 		  | (use_rbuf_gain2 ? 0 : AD5791_CTRL_RBUF) |
@@ -416,10 +402,9 @@ static int ad5791_probe(struct spi_device *spi)
 	spi_set_drvdata(spi, indio_dev);
 	indio_dev->info = &ad5791_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
-	indio_dev->channels
-		= &ad5791_channels[spi_get_device_id(spi)->driver_data];
+	indio_dev->channels = &st->chip_info->channel;
 	indio_dev->num_channels = 1;
-	indio_dev->name = spi_get_device_id(st->spi)->name;
+	indio_dev->name = st->chip_info->name;
 	ret = iio_device_register(indio_dev);
 	if (ret)
 		goto error_disable_reg_neg;
@@ -448,19 +433,30 @@ static void ad5791_remove(struct spi_device *spi)
 		regulator_disable(st->reg_vss);
 }
 
+static const struct of_device_id ad5791_of_match[] = {
+	{ .compatible = "adi,ad5760", .data = &ad5760_chip_info },
+	{ .compatible = "adi,ad5780", .data = &ad5780_chip_info },
+	{ .compatible = "adi,ad5781", .data = &ad5781_chip_info },
+	{ .compatible = "adi,ad5790", .data = &ad5790_chip_info },
+	{ .compatible = "adi,ad5791", .data = &ad5791_chip_info },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ad5791_of_match);
+
 static const struct spi_device_id ad5791_id[] = {
-	{"ad5760", ID_AD5760},
-	{"ad5780", ID_AD5780},
-	{"ad5781", ID_AD5781},
-	{"ad5790", ID_AD5791},
-	{"ad5791", ID_AD5791},
-	{}
+	{ "ad5760", (kernel_ulong_t)&ad5760_chip_info },
+	{ "ad5780", (kernel_ulong_t)&ad5780_chip_info },
+	{ "ad5781", (kernel_ulong_t)&ad5781_chip_info },
+	{ "ad5790", (kernel_ulong_t)&ad5790_chip_info },
+	{ "ad5791", (kernel_ulong_t)&ad5791_chip_info },
+	{ }
 };
 MODULE_DEVICE_TABLE(spi, ad5791_id);
 
 static struct spi_driver ad5791_driver = {
 	.driver = {
 		   .name = "ad5791",
+		   .of_match_table = ad5791_of_match,
 		   },
 	.probe = ad5791_probe,
 	.remove = ad5791_remove,
-- 
2.34.1

[PATCH 4/6] iio: dac: ad5791: Add reset, clr and ldac gpios

[ahaslam]

From: Axel Haslam <ahaslam@baylibre.com>

The ad7591 has reset, clr and ldac gpios. For the DAC to output data
continuously written to the data register the state of these gpios needs
to be set by the driver.

Add these gpios to the driver making them optional in case they are fixed
on the pcb.

Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
---
 drivers/iio/dac/ad5791.c | 34 +++++++++++++++++++++++++++++++---
 1 file changed, 31 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/dac/ad5791.c b/drivers/iio/dac/ad5791.c
index f6b9a40241f3..c5d4d755d57a 100644
--- a/drivers/iio/dac/ad5791.c
+++ b/drivers/iio/dac/ad5791.c
@@ -9,6 +9,7 @@
 #include <linux/interrupt.h>
 #include <linux/fs.h>
 #include <linux/device.h>
+#include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
@@ -76,6 +77,9 @@ struct ad5791_chip_info {
  * @spi:			spi_device
  * @reg_vdd:		positive supply regulator
  * @reg_vss:		negative supply regulator
+ * @gpio_reset:		reset gpio
+ * @gpio_clear:		clear gpio
+ * @gpio_ldac:		load dac gpio
  * @chip_info:		chip model specific constants
  * @vref_mv:		actual reference voltage used
  * @vref_neg_mv:	voltage of the negative supply
@@ -88,6 +92,9 @@ struct ad5791_state {
 	struct spi_device		*spi;
 	struct regulator		*reg_vdd;
 	struct regulator		*reg_vss;
+	struct gpio_desc		*gpio_reset;
+	struct gpio_desc		*gpio_clear;
+	struct gpio_desc		*gpio_ldac;
 	const struct ad5791_chip_info	*chip_info;
 	unsigned short			vref_mv;
 	unsigned int			vref_neg_mv;
@@ -337,6 +344,22 @@ static int ad5791_probe(struct spi_device *spi)
 	if (!indio_dev)
 		return -ENOMEM;
 	st = iio_priv(indio_dev);
+
+	st->gpio_reset = devm_gpiod_get_optional(&spi->dev, "reset",
+						 GPIOD_OUT_HIGH);
+	if (IS_ERR(st->gpio_reset))
+		return PTR_ERR(st->gpio_reset);
+
+	st->gpio_clear = devm_gpiod_get_optional(&spi->dev, "clear",
+						 GPIOD_OUT_LOW);
+	if (IS_ERR(st->gpio_clear))
+		return PTR_ERR(st->gpio_clear);
+
+	st->gpio_ldac = devm_gpiod_get_optional(&spi->dev, "ldac",
+						GPIOD_OUT_HIGH);
+	if (IS_ERR(st->gpio_ldac))
+		return PTR_ERR(st->gpio_ldac);
+
 	st->reg_vdd = devm_regulator_get(&spi->dev, "vdd");
 	if (!IS_ERR(st->reg_vdd)) {
 		ret = regulator_enable(st->reg_vdd);
@@ -382,9 +405,14 @@ static int ad5791_probe(struct spi_device *spi)
 		dev_warn(&spi->dev, "reference voltage unspecified\n");
 	}
 
-	ret = ad5791_spi_write(st, AD5791_ADDR_SW_CTRL, AD5791_SWCTRL_RESET);
-	if (ret)
-		goto error_disable_reg_neg;
+	if (st->gpio_reset) {
+		fsleep(20);
+		gpiod_set_value_cansleep(st->gpio_reset, 0);
+	} else {
+		ret = ad5791_spi_write(st, AD5791_ADDR_SW_CTRL, AD5791_SWCTRL_RESET);
+		if (ret)
+			goto error_disable_reg_neg;
+	}
 
 	st->chip_info = spi_get_device_match_data(spi);
 	if (!st->chip_info)
-- 
2.34.1

[PATCH 5/6] iio: dac: ad5791: Use devm_regulator_get_enable_read_voltage

[ahaslam]

From: Axel Haslam <ahaslam@baylibre.com>

Simplify probe by using of the devm_regulator_get_enable_read_voltage.

Suggested-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
---
 drivers/iio/dac/ad5791.c | 58 ++++++++++------------------------------
 1 file changed, 14 insertions(+), 44 deletions(-)

diff --git a/drivers/iio/dac/ad5791.c b/drivers/iio/dac/ad5791.c
index c5d4d755d57a..92d47e766fd3 100644
--- a/drivers/iio/dac/ad5791.c
+++ b/drivers/iio/dac/ad5791.c
@@ -360,32 +360,6 @@ static int ad5791_probe(struct spi_device *spi)
 	if (IS_ERR(st->gpio_ldac))
 		return PTR_ERR(st->gpio_ldac);
 
-	st->reg_vdd = devm_regulator_get(&spi->dev, "vdd");
-	if (!IS_ERR(st->reg_vdd)) {
-		ret = regulator_enable(st->reg_vdd);
-		if (ret)
-			return ret;
-
-		ret = regulator_get_voltage(st->reg_vdd);
-		if (ret < 0)
-			goto error_disable_reg_pos;
-
-		pos_voltage_uv = ret;
-	}
-
-	st->reg_vss = devm_regulator_get(&spi->dev, "vss");
-	if (!IS_ERR(st->reg_vss)) {
-		ret = regulator_enable(st->reg_vss);
-		if (ret)
-			goto error_disable_reg_pos;
-
-		ret = regulator_get_voltage(st->reg_vss);
-		if (ret < 0)
-			goto error_disable_reg_neg;
-
-		neg_voltage_uv = ret;
-	}
-
 	st->pwr_down = true;
 	st->spi = spi;
 
@@ -395,7 +369,17 @@ static int ad5791_probe(struct spi_device *spi)
 		use_rbuf_gain2 = device_property_read_bool(&spi->dev,
 							   "adi,rbuf-gain2-en");
 
-	if (!IS_ERR(st->reg_vss) && !IS_ERR(st->reg_vdd)) {
+	pos_voltage_uv = devm_regulator_get_enable_read_voltage(&spi->dev, "vdd");
+	if (pos_voltage_uv < 0 && pos_voltage_uv != -ENODEV)
+		return dev_err_probe(&spi->dev, pos_voltage_uv,
+				     "failed to get vdd voltage\n");
+
+	neg_voltage_uv = devm_regulator_get_enable_read_voltage(&spi->dev, "vss");
+	if (neg_voltage_uv < 0 && neg_voltage_uv != -ENODEV)
+		return dev_err_probe(&spi->dev, neg_voltage_uv,
+				     "failed to get vss voltage\n");
+
+	if (neg_voltage_uv >= 0 && pos_voltage_uv >= 0) {
 		st->vref_mv = (pos_voltage_uv + neg_voltage_uv) / 1000;
 		st->vref_neg_mv = neg_voltage_uv / 1000;
 	} else if (pdata) {
@@ -411,7 +395,7 @@ static int ad5791_probe(struct spi_device *spi)
 	} else {
 		ret = ad5791_spi_write(st, AD5791_ADDR_SW_CTRL, AD5791_SWCTRL_RESET);
 		if (ret)
-			goto error_disable_reg_neg;
+			return dev_err_probe(&spi->dev, ret, "fail to reset\n");
 	}
 
 	st->chip_info = spi_get_device_match_data(spi);
@@ -425,7 +409,7 @@ static int ad5791_probe(struct spi_device *spi)
 	ret = ad5791_spi_write(st, AD5791_ADDR_CTRL, st->ctrl |
 		AD5791_CTRL_OPGND | AD5791_CTRL_DACTRI);
 	if (ret)
-		goto error_disable_reg_neg;
+		return dev_err_probe(&spi->dev, ret, "fail to write ctrl register\n");
 
 	spi_set_drvdata(spi, indio_dev);
 	indio_dev->info = &ad5791_info;
@@ -435,30 +419,16 @@ static int ad5791_probe(struct spi_device *spi)
 	indio_dev->name = st->chip_info->name;
 	ret = iio_device_register(indio_dev);
 	if (ret)
-		goto error_disable_reg_neg;
+		return dev_err_probe(&spi->dev, ret, "unable to register iio device\n");
 
 	return 0;
-
-error_disable_reg_neg:
-	if (!IS_ERR(st->reg_vss))
-		regulator_disable(st->reg_vss);
-error_disable_reg_pos:
-	if (!IS_ERR(st->reg_vdd))
-		regulator_disable(st->reg_vdd);
-	return ret;
 }
 
 static void ad5791_remove(struct spi_device *spi)
 {
 	struct iio_dev *indio_dev = spi_get_drvdata(spi);
-	struct ad5791_state *st = iio_priv(indio_dev);
 
 	iio_device_unregister(indio_dev);
-	if (!IS_ERR(st->reg_vdd))
-		regulator_disable(st->reg_vdd);
-
-	if (!IS_ERR(st->reg_vss))
-		regulator_disable(st->reg_vss);
 }
 
 static const struct of_device_id ad5791_of_match[] = {
-- 
2.34.1

[PATCH 6/6] iio: dac: ad5791: Use devm_iio_device_register

[ahaslam]

From: Axel Haslam <ahaslam@baylibre.com>

Use devm_iio_device_register to automatically free the iio device.
since this is the last remaining resource that was not automatically
freed, we can drop the ".remove" callback.

Suggested-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
---
 drivers/iio/dac/ad5791.c | 15 +--------------
 1 file changed, 1 insertion(+), 14 deletions(-)

diff --git a/drivers/iio/dac/ad5791.c b/drivers/iio/dac/ad5791.c
index 92d47e766fd3..57374f78f6b8 100644
--- a/drivers/iio/dac/ad5791.c
+++ b/drivers/iio/dac/ad5791.c
@@ -411,24 +411,12 @@ static int ad5791_probe(struct spi_device *spi)
 	if (ret)
 		return dev_err_probe(&spi->dev, ret, "fail to write ctrl register\n");
 
-	spi_set_drvdata(spi, indio_dev);
 	indio_dev->info = &ad5791_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->channels = &st->chip_info->channel;
 	indio_dev->num_channels = 1;
 	indio_dev->name = st->chip_info->name;
-	ret = iio_device_register(indio_dev);
-	if (ret)
-		return dev_err_probe(&spi->dev, ret, "unable to register iio device\n");
-
-	return 0;
-}
-
-static void ad5791_remove(struct spi_device *spi)
-{
-	struct iio_dev *indio_dev = spi_get_drvdata(spi);
-
-	iio_device_unregister(indio_dev);
+	return devm_iio_device_register(&spi->dev, indio_dev);
 }
 
 static const struct of_device_id ad5791_of_match[] = {
@@ -457,7 +445,6 @@ static struct spi_driver ad5791_driver = {
 		   .of_match_table = ad5791_of_match,
 		   },
 	.probe = ad5791_probe,
-	.remove = ad5791_remove,
 	.id_table = ad5791_id,
 };
 module_spi_driver(ad5791_driver);
-- 
2.34.1

Re: [PATCH 1/6] dt-bindings: iio: dac: ad5791: Add optional reset, clr and ldac gpios

[Krzysztof Kozlowski]

On 29/10/2024 08:38, ahaslam@baylibre.com wrote:
> From: Axel Haslam <ahaslam@baylibre.com>
> 
> Depending on board layout, the ad57xx may need control of reset, clear,
> and ldac pins by the host driver. Add optional bindings for these gpios.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

I don't get how v1 could get my review. I never give reviews out of
mailing lists.

Best regards,
Krzysztof

Re: [PATCH 2/6] dt-bindings: iio: dac: ad5791: Add required voltage supplies

[Krzysztof Kozlowski]

On 29/10/2024 08:38, ahaslam@baylibre.com wrote:
> From: Axel Haslam <ahaslam@baylibre.com>
> 
> Vcc, iovcc, vrefp, and vrefn are needed for the DAC to work.
> Add them as required bindings for ad5791.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Axel Haslam <ahaslam@baylibre.com>

Same question. I don't think v1 could receive my review.

Best regards,
Krzysztof

Re: [PATCH 1/6] dt-bindings: iio: dac: ad5791: Add optional reset, clr and ldac gpios

[Axel Haslam]

On Tue, 29 Oct 2024 at 10:21, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 29/10/2024 08:38, ahaslam@baylibre.com wrote:
> > From: Axel Haslam <ahaslam@baylibre.com>
> >
> > Depending on board layout, the ad57xx may need control of reset, clear,
> > and ldac pins by the host driver. Add optional bindings for these gpios.
> >
> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> I don't get how v1 could get my review. I never give reviews out of
> mailing lists.

I  forgot to mark this as v2 with the subject prefix. :(
this should be v2, same for the other patches. ill resend.

>
> Best regards,
> Krzysztof
>

Re: [PATCH 0/6] Improvements and Enhancements for AD5791 DAC Driver

[David Lechner]

On 10/29/24 2:38 AM, ahaslam@baylibre.com wrote:
> From: Axel Haslam <ahaslam@baylibre.com>
> 
> These patches aim to improve on the ad5791 driver:
>  - make use of chip_info / match tables, and drop device enum id.
>  - Add reset, clr and ldac gpios that have to be set to the correct level in case they
>    are not hardwired on the setup/PCB.
>  - simplify probe by using the devm_* functions to automatically free resources.
> ---
Reviewed-by: David Lechner <dlechner@baylibre.com>