From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: Re: [PATCH v5 2/4] Documentation: dt: add bindings for ti-cpufreq Date: Wed, 8 Feb 2017 08:44:27 -0600 Message-ID: References: <20170203172929.23940-1-d-gerlach@ti.com> <20170203172929.23940-3-d-gerlach@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20170203172929.23940-3-d-gerlach@ti.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Dave Gerlach Cc: Nishanth Menon , "devicetree@vger.kernel.org" , "linux-pm@vger.kernel.org" , Tony Lindgren , Viresh Kumar , "Rafael J . Wysocki" , Lukasz Majewski , linux-omap , "linux-arm-kernel@lists.infradead.org" List-Id: devicetree@vger.kernel.org On Fri, Feb 3, 2017 at 11:29 AM, Dave Gerlach wrote: > Add the device tree bindings document for the TI CPUFreq/OPP driver > on AM33xx, AM43xx, DRA7xx, and AM57xx SoCs. The operating-points-v2 > binding allows us to provide an opp-supported-hw property for each OPP > to define when it is available. This driver is responsible for reading > and parsing registers to determine which OPPs can be selectively enabled > based on the specific SoC in use by matching against the opp-supported-hw > data. > > Acked-by: Viresh Kumar > Signed-off-by: Dave Gerlach > --- [...] > +/* > + * cpu0 has different OPPs depending on SoC revision and some on revisions > + * 0x2 and 0x4 have eFuse bits that indicate if they are available or not > + */ > +cpu0_opp_table: opp_table { One step closer, but as I showed last time, use a '-', not '_'. Rob