[PATCH v4 0/5] Display enablement changes for Qualcomm SA8775P platform

[PATCH v4 0/5] Display enablement changes for Qualcomm SA8775P platform

[Mahadevan]

This series introduces support to enable the Mobile Display Subsystem (MDSS)
and Display Processing Unit (DPU) for the Qualcomm SA8775P target. It
includes the addition of the hardware catalog, compatible string,
relevant device tree changes, and their YAML bindings.

---
In this series
- PATCH 1: "dt-bindings: display/msm: Document MDSS on SA8775P" depends on dp
  binding documetion in this change:
  https://lore.kernel.org/all/20240923113150.24711-5-quic_mukhopad@quicinc.com/
- PATCH 5: "arm64: dts: qcom: sa8775p: add display dt nodes for MDSS0 and DPU"
  depends on the clock enablement change:
  https://lore.kernel.org/all/20240816-sa8775p-mm-v3-v1-0-77d53c3c0cef@quicinc.com/

---

[v4]
- Removed new YAML added for sa8775p dpu dt-binding documention as it is similar
  to qcom,sm8650-dpu.yaml and added the compatible in same. [Krzysztof]

[v3]
-Edited copyright for catalog changes. [Dmitry]
-Fix dt_binding_check tool errors(update reg address as address-cells and
 size-cells of root node one and maintain the same for child nodes of mdss,
 added additionalProperties in schema).
 [Rob, Bjorn, Krzysztof]
-Add QCOM_ICC_TAG_ACTIVE_ONLY interconnect path tag to mdp0-mem and mdp1-mem
 path in devicetree. [Dmitry]
-Update commit subject and message for DT change. [Dmitry]
-Remove interconnect path tags from dt bindings. (ref sm8450-mdss yaml)

[v2]
- Updated cover letter subject and message. [Dmitry]
- Use fake DISPCC nodes to avoid clock dependencies in dt-bindings. [Dmitry]
- Update bindings by fixing dt_binding_check tool errors (update includes in example),
  adding proper spacing and indentation in the binding example, droping unused labels,
  droping status disable, adding reset node. [Dmitry, Rob, Krzysztof]
- Reorder compatible string of MDSS and DPU based on alphabetical order.[Dmitry]
- add reg_bus_bw in msm_mdss_data. [Dmitry]
- Fix indentation in the devicetree. [Dmitry]

--
2.34.1

---
Mahadevan (5):
      dt-bindings: display/msm: Document MDSS on SA8775P
      dt-bindings: display/msm: Document the DPU for SA8775P
      drm/msm: mdss: Add SA8775P support
      drm/msm/dpu: Add SA8775P support
      arm64: dts: qcom: sa8775p: add display dt nodes for MDSS0 and DPU

 .../bindings/display/msm/qcom,sa8775p-mdss.yaml    | 241 ++++++++++
 .../bindings/display/msm/qcom,sm8650-dpu.yaml      |   1 +
 arch/arm64/boot/dts/qcom/sa8775p.dtsi              |  89 ++++
 .../drm/msm/disp/dpu1/catalog/dpu_8_4_sa8775p.h    | 485 +++++++++++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c            |   1 +
 drivers/gpu/drm/msm/msm_mdss.c                     |  11 +
 8 files changed, 830 insertions(+)
---
base-commit: e390603cfa79c860ed35e073f5fe77805b067a8e
change-id: 20240930-patchv3_1-600cbc1549e8

Best regards,
-- 
Mahadevan <quic_mahap@quicinc.com>

[PATCH v4 1/5] dt-bindings: display/msm: Document MDSS on SA8775P

[Mahadevan]

Document the MDSS hardware found on the Qualcomm SA8775P platform.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mahadevan <quic_mahap@quicinc.com>
---
 .../bindings/display/msm/qcom,sa8775p-mdss.yaml    | 241 +++++++++++++++++++++
 1 file changed, 241 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..37c04ae6876f873c2cddc51b5160b1f54e2b5118
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
@@ -0,0 +1,241 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sa8775p-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SA87755P Display MDSS
+
+maintainers:
+  - Mahadevan <quic_mahap@quicinc.com>
+
+description:
+  SA8775P MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DP interfaces and EDP etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sa8775p-mdss
+
+  clocks:
+    items:
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    maxItems: 3
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sa8775p-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,sa8775p-dp
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interconnect/qcom,icc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+    #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sa8775p-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>,
+                        <&mmss_noc MASTER_MDP1 &mc_virt SLAVE_EBI1>,
+                        <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>;
+        interconnect-names = "mdp0-mem",
+                             "mdp1-mem",
+                             "cpu-cfg";
+
+
+        resets = <&dispcc_core_bcr>;
+        power-domains = <&dispcc_gdsc>;
+
+        clocks = <&dispcc_ahb_clk>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc_mdp_clk>;
+
+        interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x1000 0x402>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sa8775p-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc_ahb_clk>,
+                     <&dispcc_mdp_lut_clk>,
+                     <&dispcc_mdp_clk>,
+                     <&dispcc_mdp_vsync_clk>;
+            clock-names = "bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc_mdp_vsync_clk>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdss0_mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            interrupt-parent = <&mdss0>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf0_out: endpoint {
+                         remote-endpoint = <&mdss0_dp0_in>;
+                    };
+                };
+            };
+
+            mdss0_mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-375000000 {
+                    opp-hz = /bits/ 64 <375000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-500000000 {
+                    opp-hz = /bits/ 64 <500000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+
+                opp-575000000 {
+                    opp-hz = /bits/ 64 <575000000>;
+                    required-opps = <&rpmhpd_opp_turbo>;
+                };
+
+                opp-650000000 {
+                    opp-hz = /bits/ 64 <650000000>;
+                    required-opps = <&rpmhpd_opp_turbo_l1>;
+                };
+            };
+        };
+
+        displayport-controller@af54000 {
+            compatible = "qcom,sa8775p-dp";
+
+            pinctrl-0 = <&dp_hot_plug_det>;
+            pinctrl-names = "default";
+
+            reg = <0xaf54000 0x104>,
+                  <0xaf54200 0x0c0>,
+                  <0xaf55000 0x770>,
+                  <0xaf56000 0x09c>;
+
+            interrupt-parent = <&mdss0>;
+            interrupts = <12>;
+
+            clocks = <&dispcc_mdss_ahb_clk>,
+                     <&dispcc_dptx0_aux_clk>,
+                     <&dispcc_dptx0_link_clk>,
+                     <&dispcc_dptx0_link_intf_clk>,
+                     <&dispcc_dptx0_pixel0_clk>;
+            clock-names = "core_iface",
+                          "core_aux",
+                          "ctrl_link",
+                          "ctrl_link_iface",
+                          "stream_pixel";
+
+            assigned-clocks = <&dispcc_mdss_dptx0_link_clk_src>,
+                              <&dispcc_mdss_dptx0_pixel0_clk_src>;
+            assigned-clock-parents = <&mdss0_edp_phy 0>, <&mdss0_edp_phy 1>;
+
+            phys = <&mdss0_edp_phy>;
+            phy-names = "dp";
+
+            operating-points-v2 = <&dp_opp_table>;
+            power-domains = <&rpmhpd SA8775P_MMCX>;
+
+            #sound-dai-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss0_dp0_in: endpoint {
+                        remote-endpoint = <&dpu_intf0_out>;
+                    };
+                };
+
+                port@1 {
+                   reg = <1>;
+                   mdss0_dp_out: endpoint { };
+                };
+            };
+
+            dp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-160000000 {
+                    opp-hz = /bits/ 64 <160000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-270000000 {
+                    opp-hz = /bits/ 64 <270000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-540000000 {
+                    opp-hz = /bits/ 64 <540000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-810000000 {
+                    opp-hz = /bits/ 64 <810000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+    };
+...

-- 
2.34.1

Re: [PATCH v4 1/5] dt-bindings: display/msm: Document MDSS on SA8775P

[Dmitry Baryshkov]

On Wed, Oct 09, 2024 at 08:02:01PM +0530, Mahadevan wrote:
> Document the MDSS hardware found on the Qualcomm SA8775P platform.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Mahadevan <quic_mahap@quicinc.com>
> ---
>  .../bindings/display/msm/qcom,sa8775p-mdss.yaml    | 241 +++++++++++++++++++++
>  1 file changed, 241 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..37c04ae6876f873c2cddc51b5160b1f54e2b5118
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml

[...]

> +
> +        display-controller@ae01000 {
> +            compatible = "qcom,sa8775p-dpu";
> +            reg = <0x0ae01000 0x8f000>,
> +                  <0x0aeb0000 0x2008>;
> +            reg-names = "mdp", "vbif";
> +
> +            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> +                     <&dispcc_ahb_clk>,
> +                     <&dispcc_mdp_lut_clk>,
> +                     <&dispcc_mdp_clk>,
> +                     <&dispcc_mdp_vsync_clk>;
> +            clock-names = "bus",
> +                          "iface",
> +                          "lut",
> +                          "core",
> +                          "vsync";
> +

It's been more than a week since Rob reported issues with the bindings.
Any updates? Obviously I can not pick up patches with binding errors.

> +            assigned-clocks = <&dispcc_mdp_vsync_clk>;
> +            assigned-clock-rates = <19200000>;
> +
> +            operating-points-v2 = <&mdss0_mdp_opp_table>;
> +            power-domains = <&rpmhpd RPMHPD_MMCX>;
> +
> +            interrupt-parent = <&mdss0>;
> +            interrupts = <0>;
> +

-- 
With best wishes
Dmitry

Re: [PATCH v4 1/5] dt-bindings: display/msm: Document MDSS on SA8775P

[Rob Herring]

On Fri, Oct 18, 2024 at 6:00 AM Dmitry Baryshkov
<dmitry.baryshkov@linaro.org> wrote:
>
> On Wed, Oct 09, 2024 at 08:02:01PM +0530, Mahadevan wrote:
> > Document the MDSS hardware found on the Qualcomm SA8775P platform.
> >
> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> > Signed-off-by: Mahadevan <quic_mahap@quicinc.com>
> > ---
> >  .../bindings/display/msm/qcom,sa8775p-mdss.yaml    | 241 +++++++++++++++++++++
> >  1 file changed, 241 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
> > new file mode 100644
> > index 0000000000000000000000000000000000000000..37c04ae6876f873c2cddc51b5160b1f54e2b5118
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
>
> [...]
>
> > +
> > +        display-controller@ae01000 {
> > +            compatible = "qcom,sa8775p-dpu";
> > +            reg = <0x0ae01000 0x8f000>,
> > +                  <0x0aeb0000 0x2008>;
> > +            reg-names = "mdp", "vbif";
> > +
> > +            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> > +                     <&dispcc_ahb_clk>,
> > +                     <&dispcc_mdp_lut_clk>,
> > +                     <&dispcc_mdp_clk>,
> > +                     <&dispcc_mdp_vsync_clk>;
> > +            clock-names = "bus",
> > +                          "iface",
> > +                          "lut",
> > +                          "core",
> > +                          "vsync";
> > +
>
> It's been more than a week since Rob reported issues with the bindings.
> Any updates? Obviously I can not pick up patches with binding errors.

Well, someone picked up this version rather than v5 which appears to
have fixed it. So, probably need an incremental patch to fix the
warning in linux-next.

Rob

Re: [PATCH v4 1/5] dt-bindings: display/msm: Document MDSS on SA8775P

[Dmitry Baryshkov]

On Mon, 11 Nov 2024 at 19:06, Rob Herring <robh@kernel.org> wrote:
>
> On Fri, Oct 18, 2024 at 6:00 AM Dmitry Baryshkov
> <dmitry.baryshkov@linaro.org> wrote:
> >
> > On Wed, Oct 09, 2024 at 08:02:01PM +0530, Mahadevan wrote:
> > > Document the MDSS hardware found on the Qualcomm SA8775P platform.
> > >
> > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> > > Signed-off-by: Mahadevan <quic_mahap@quicinc.com>
> > > ---
> > >  .../bindings/display/msm/qcom,sa8775p-mdss.yaml    | 241 +++++++++++++++++++++
> > >  1 file changed, 241 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
> > > new file mode 100644
> > > index 0000000000000000000000000000000000000000..37c04ae6876f873c2cddc51b5160b1f54e2b5118
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
> >
> > [...]
> >
> > > +
> > > +        display-controller@ae01000 {
> > > +            compatible = "qcom,sa8775p-dpu";
> > > +            reg = <0x0ae01000 0x8f000>,
> > > +                  <0x0aeb0000 0x2008>;
> > > +            reg-names = "mdp", "vbif";
> > > +
> > > +            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> > > +                     <&dispcc_ahb_clk>,
> > > +                     <&dispcc_mdp_lut_clk>,
> > > +                     <&dispcc_mdp_clk>,
> > > +                     <&dispcc_mdp_vsync_clk>;
> > > +            clock-names = "bus",
> > > +                          "iface",
> > > +                          "lut",
> > > +                          "core",
> > > +                          "vsync";
> > > +
> >
> > It's been more than a week since Rob reported issues with the bindings.
> > Any updates? Obviously I can not pick up patches with binding errors.
>
> Well, someone picked up this version rather than v5 which appears to
> have fixed it. So, probably need an incremental patch to fix the
> warning in linux-next.

Well, I picked up v5, [1]. I will check if there are warnings and send
a patch targeting linux-next / msm-fixes.

[1] https://gitlab.freedesktop.org/lumag/msm/-/commit/409685915f00


-- 
With best wishes
Dmitry

[PATCH v4 2/5] dt-bindings: display/msm: Document the DPU for SA8775P

[Mahadevan]

Document the DPU for Qualcomm SA8775P platform.

Signed-off-by: Mahadevan <quic_mahap@quicinc.com>
---
 Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml
index c4087cc5abbdd44885a6755e1facda767a16f35d..01cf79bd754b491349c52c5aef49ba06e835d0bf 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml
@@ -14,6 +14,7 @@ $ref: /schemas/display/msm/dpu-common.yaml#
 properties:
   compatible:
     enum:
+      - qcom,sa8775p-dpu
       - qcom,sm8650-dpu
       - qcom,x1e80100-dpu
 

-- 
2.34.1

Re: [PATCH v4 2/5] dt-bindings: display/msm: Document the DPU for SA8775P

[Rob Herring (Arm)]

On Wed, 09 Oct 2024 20:02:02 +0530, Mahadevan wrote:
> Document the DPU for Qualcomm SA8775P platform.
> 
> Signed-off-by: Mahadevan <quic_mahap@quicinc.com>
> ---
>  Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.example.dtb: display-controller@ae01000: clock-names:0: 'nrt_bus' was expected
	from schema $id: http://devicetree.org/schemas/display/msm/qcom,sm8650-dpu.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.example.dtb: display-controller@ae01000: Unevaluated properties are not allowed ('clock-names' was unexpected)
	from schema $id: http://devicetree.org/schemas/display/msm/qcom,sm8650-dpu.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241009-patchv3_1-v4-2-cd683a9ca554@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

[PATCH v4 3/5] drm/msm: mdss: Add SA8775P support

[Mahadevan]

Add Mobile Display Subsystem (MDSS) support for the SA8775P platform.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Mahadevan <quic_mahap@quicinc.com>
---
 drivers/gpu/drm/msm/msm_mdss.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c
index faa88fd6eb4d6aec383a242b66a2b5125c91b3bc..8f1d42a43bd02dd79acf222a3423d11ff3b3cba3 100644
--- a/drivers/gpu/drm/msm/msm_mdss.c
+++ b/drivers/gpu/drm/msm/msm_mdss.c
@@ -573,6 +573,16 @@ static const struct msm_mdss_data qcm2290_data = {
 	.reg_bus_bw = 76800,
 };
 
+static const struct msm_mdss_data sa8775p_data = {
+	.ubwc_enc_version = UBWC_4_0,
+	.ubwc_dec_version = UBWC_4_0,
+	.ubwc_swizzle = 4,
+	.ubwc_static = 1,
+	.highest_bank_bit = 0,
+	.macrotile_mode = 1,
+	.reg_bus_bw = 74000,
+};
+
 static const struct msm_mdss_data sc7180_data = {
 	.ubwc_enc_version = UBWC_2_0,
 	.ubwc_dec_version = UBWC_2_0,
@@ -710,6 +720,7 @@ static const struct of_device_id mdss_dt_match[] = {
 	{ .compatible = "qcom,mdss" },
 	{ .compatible = "qcom,msm8998-mdss", .data = &msm8998_data },
 	{ .compatible = "qcom,qcm2290-mdss", .data = &qcm2290_data },
+	{ .compatible = "qcom,sa8775p-mdss", .data = &sa8775p_data },
 	{ .compatible = "qcom,sdm670-mdss", .data = &sdm670_data },
 	{ .compatible = "qcom,sdm845-mdss", .data = &sdm845_data },
 	{ .compatible = "qcom,sc7180-mdss", .data = &sc7180_data },

-- 
2.34.1

[PATCH v4 4/5] drm/msm/dpu: Add SA8775P support

[Mahadevan]

Add definitions for the display hardware used on the
Qualcomm SA8775P platform.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Mahadevan <quic_mahap@quicinc.com>
---
 .../drm/msm/disp/dpu1/catalog/dpu_8_4_sa8775p.h    | 485 +++++++++++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c            |   1 +
 4 files changed, 488 insertions(+)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_4_sa8775p.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_4_sa8775p.h
new file mode 100644
index 0000000000000000000000000000000000000000..907b4d7ceb470b0391d2bbbab3ce520efa2b3263
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_4_sa8775p.h
@@ -0,0 +1,485 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DPU_8_4_SA8775P_H
+#define _DPU_8_4_SA8775P_H
+
+static const struct dpu_caps sa8775p_dpu_caps = {
+	.max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+	.max_mixer_blendstages = 0xb,
+	.has_src_split = true,
+	.has_dim_layer = true,
+	.has_idle_pc = true,
+	.has_3d_merge = true,
+	.max_linewidth = 5120,
+	.pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
+};
+
+static const struct dpu_mdp_cfg sa8775p_mdp = {
+	.name = "top_0",
+	.base = 0x0, .len = 0x494,
+	.features = BIT(DPU_MDP_PERIPH_0_REMOVED),
+	.clk_ctrls = {
+		[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0 },
+		[DPU_CLK_CTRL_VIG1] = { .reg_off = 0x2b4, .bit_off = 0 },
+		[DPU_CLK_CTRL_VIG2] = { .reg_off = 0x2bc, .bit_off = 0 },
+		[DPU_CLK_CTRL_VIG3] = { .reg_off = 0x2c4, .bit_off = 0 },
+		[DPU_CLK_CTRL_DMA0] = { .reg_off = 0x2ac, .bit_off = 8 },
+		[DPU_CLK_CTRL_DMA1] = { .reg_off = 0x2b4, .bit_off = 8 },
+		[DPU_CLK_CTRL_DMA2] = { .reg_off = 0x2bc, .bit_off = 8 },
+		[DPU_CLK_CTRL_DMA3] = { .reg_off = 0x2c4, .bit_off = 8 },
+		[DPU_CLK_CTRL_WB2] = { .reg_off = 0x2bc, .bit_off = 16 },
+		[DPU_CLK_CTRL_REG_DMA] = { .reg_off = 0x2bc, .bit_off = 20 },
+	},
+};
+
+/* FIXME: get rid of DPU_CTL_SPLIT_DISPLAY in favour of proper ACTIVE_CTL support */
+static const struct dpu_ctl_cfg sa8775p_ctl[] = {
+	{
+		.name = "ctl_0", .id = CTL_0,
+		.base = 0x15000, .len = 0x204,
+		.features = BIT(DPU_CTL_SPLIT_DISPLAY) | CTL_SC7280_MASK,
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
+	}, {
+		.name = "ctl_1", .id = CTL_1,
+		.base = 0x16000, .len = 0x204,
+		.features = BIT(DPU_CTL_SPLIT_DISPLAY) | CTL_SC7280_MASK,
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
+	}, {
+		.name = "ctl_2", .id = CTL_2,
+		.base = 0x17000, .len = 0x204,
+		.features = CTL_SC7280_MASK,
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
+	}, {
+		.name = "ctl_3", .id = CTL_3,
+		.base = 0x18000, .len = 0x204,
+		.features = CTL_SC7280_MASK,
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
+	}, {
+		.name = "ctl_4", .id = CTL_4,
+		.base = 0x19000, .len = 0x204,
+		.features = CTL_SC7280_MASK,
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13),
+	}, {
+		.name = "ctl_5", .id = CTL_5,
+		.base = 0x1a000, .len = 0x204,
+		.features = CTL_SC7280_MASK,
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23),
+	},
+};
+
+static const struct dpu_sspp_cfg sa8775p_sspp[] = {
+	{
+		.name = "sspp_0", .id = SSPP_VIG0,
+		.base = 0x4000, .len = 0x32c,
+		.features = VIG_SDM845_MASK_SDMA,
+		.sblk = &dpu_vig_sblk_qseed3_3_1,
+		.xin_id = 0,
+		.type = SSPP_TYPE_VIG,
+		.clk_ctrl = DPU_CLK_CTRL_VIG0,
+	}, {
+		.name = "sspp_1", .id = SSPP_VIG1,
+		.base = 0x6000, .len = 0x32c,
+		.features = VIG_SDM845_MASK_SDMA,
+		.sblk = &dpu_vig_sblk_qseed3_3_1,
+		.xin_id = 4,
+		.type = SSPP_TYPE_VIG,
+		.clk_ctrl = DPU_CLK_CTRL_VIG1,
+	}, {
+		.name = "sspp_2", .id = SSPP_VIG2,
+		.base = 0x8000, .len = 0x32c,
+		.features = VIG_SDM845_MASK_SDMA,
+		.sblk = &dpu_vig_sblk_qseed3_3_1,
+		.xin_id = 8,
+		.type = SSPP_TYPE_VIG,
+		.clk_ctrl = DPU_CLK_CTRL_VIG2,
+	}, {
+		.name = "sspp_3", .id = SSPP_VIG3,
+		.base = 0xa000, .len = 0x32c,
+		.features = VIG_SDM845_MASK_SDMA,
+		.sblk = &dpu_vig_sblk_qseed3_3_1,
+		.xin_id = 12,
+		.type = SSPP_TYPE_VIG,
+		.clk_ctrl = DPU_CLK_CTRL_VIG3,
+	}, {
+		.name = "sspp_8", .id = SSPP_DMA0,
+		.base = 0x24000, .len = 0x32c,
+		.features = DMA_SDM845_MASK_SDMA,
+		.sblk = &dpu_dma_sblk,
+		.xin_id = 1,
+		.type = SSPP_TYPE_DMA,
+		.clk_ctrl = DPU_CLK_CTRL_DMA0,
+	}, {
+		.name = "sspp_9", .id = SSPP_DMA1,
+		.base = 0x26000, .len = 0x32c,
+		.features = DMA_SDM845_MASK_SDMA,
+		.sblk = &dpu_dma_sblk,
+		.xin_id = 5,
+		.type = SSPP_TYPE_DMA,
+		.clk_ctrl = DPU_CLK_CTRL_DMA1,
+	}, {
+		.name = "sspp_10", .id = SSPP_DMA2,
+		.base = 0x28000, .len = 0x32c,
+		.features = DMA_CURSOR_SDM845_MASK_SDMA,
+		.sblk = &dpu_dma_sblk,
+		.xin_id = 9,
+		.type = SSPP_TYPE_DMA,
+		.clk_ctrl = DPU_CLK_CTRL_DMA2,
+	}, {
+		.name = "sspp_11", .id = SSPP_DMA3,
+		.base = 0x2a000, .len = 0x32c,
+		.features = DMA_CURSOR_SDM845_MASK_SDMA,
+		.sblk = &dpu_dma_sblk,
+		.xin_id = 13,
+		.type = SSPP_TYPE_DMA,
+		.clk_ctrl = DPU_CLK_CTRL_DMA3,
+	},
+};
+
+static const struct dpu_lm_cfg sa8775p_lm[] = {
+	{
+		.name = "lm_0", .id = LM_0,
+		.base = 0x44000, .len = 0x400,
+		.features = MIXER_SDM845_MASK,
+		.sblk = &sdm845_lm_sblk,
+		.lm_pair = LM_1,
+		.pingpong = PINGPONG_0,
+		.dspp = DSPP_0,
+	}, {
+		.name = "lm_1", .id = LM_1,
+		.base = 0x45000, .len = 0x400,
+		.features = MIXER_SDM845_MASK,
+		.sblk = &sdm845_lm_sblk,
+		.lm_pair = LM_0,
+		.pingpong = PINGPONG_1,
+		.dspp = DSPP_1,
+	}, {
+		.name = "lm_2", .id = LM_2,
+		.base = 0x46000, .len = 0x400,
+		.features = MIXER_SDM845_MASK,
+		.sblk = &sdm845_lm_sblk,
+		.lm_pair = LM_3,
+		.pingpong = PINGPONG_2,
+		.dspp = DSPP_2,
+	}, {
+		.name = "lm_3", .id = LM_3,
+		.base = 0x47000, .len = 0x400,
+		.features = MIXER_SDM845_MASK,
+		.sblk = &sdm845_lm_sblk,
+		.lm_pair = LM_2,
+		.pingpong = PINGPONG_3,
+		.dspp = DSPP_3,
+	}, {
+		.name = "lm_4", .id = LM_4,
+		.base = 0x48000, .len = 0x400,
+		.features = MIXER_SDM845_MASK,
+		.sblk = &sdm845_lm_sblk,
+		.lm_pair = LM_5,
+		.pingpong = PINGPONG_4,
+	}, {
+		.name = "lm_5", .id = LM_5,
+		.base = 0x49000, .len = 0x400,
+		.features = MIXER_SDM845_MASK,
+		.sblk = &sdm845_lm_sblk,
+		.lm_pair = LM_4,
+		.pingpong = PINGPONG_5,
+	},
+};
+
+static const struct dpu_dspp_cfg sa8775p_dspp[] = {
+	{
+		.name = "dspp_0", .id = DSPP_0,
+		.base = 0x54000, .len = 0x1800,
+		.features = DSPP_SC7180_MASK,
+		.sblk = &sdm845_dspp_sblk,
+	}, {
+		.name = "dspp_1", .id = DSPP_1,
+		.base = 0x56000, .len = 0x1800,
+		.features = DSPP_SC7180_MASK,
+		.sblk = &sdm845_dspp_sblk,
+	}, {
+		.name = "dspp_2", .id = DSPP_2,
+		.base = 0x58000, .len = 0x1800,
+		.features = DSPP_SC7180_MASK,
+		.sblk = &sdm845_dspp_sblk,
+	}, {
+		.name = "dspp_3", .id = DSPP_3,
+		.base = 0x5a000, .len = 0x1800,
+		.features = DSPP_SC7180_MASK,
+		.sblk = &sdm845_dspp_sblk,
+	},
+};
+
+static const struct dpu_pingpong_cfg sa8775p_pp[] = {
+	{
+		.name = "pingpong_0", .id = PINGPONG_0,
+		.base = 0x69000, .len = 0,
+		.features = BIT(DPU_PINGPONG_DITHER),
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_0,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
+	}, {
+		.name = "pingpong_1", .id = PINGPONG_1,
+		.base = 0x6a000, .len = 0,
+		.features = BIT(DPU_PINGPONG_DITHER),
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_0,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9),
+	}, {
+		.name = "pingpong_2", .id = PINGPONG_2,
+		.base = 0x6b000, .len = 0,
+		.features = BIT(DPU_PINGPONG_DITHER),
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_1,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10),
+	}, {
+		.name = "pingpong_3", .id = PINGPONG_3,
+		.base = 0x6c000, .len = 0,
+		.features = BIT(DPU_PINGPONG_DITHER),
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_1,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 11),
+	}, {
+		.name = "pingpong_4", .id = PINGPONG_4,
+		.base = 0x6d000, .len = 0,
+		.features = BIT(DPU_PINGPONG_DITHER),
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_2,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 30),
+	}, {
+		.name = "pingpong_5", .id = PINGPONG_5,
+		.base = 0x6e000, .len = 0,
+		.features = BIT(DPU_PINGPONG_DITHER),
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_2,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 31),
+	}, {
+		.name = "pingpong_6", .id = PINGPONG_6,
+		.base = 0x65800, .len = 0,
+		.features = BIT(DPU_PINGPONG_DITHER),
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_3,
+	}, {
+		.name = "pingpong_7", .id = PINGPONG_7,
+		.base = 0x65c00, .len = 0,
+		.features = BIT(DPU_PINGPONG_DITHER),
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_3,
+	},
+};
+
+static const struct dpu_merge_3d_cfg sa8775p_merge_3d[] = {
+	{
+		.name = "merge_3d_0", .id = MERGE_3D_0,
+		.base = 0x4e000, .len = 0x8,
+	}, {
+		.name = "merge_3d_1", .id = MERGE_3D_1,
+		.base = 0x4f000, .len = 0x8,
+	}, {
+		.name = "merge_3d_2", .id = MERGE_3D_2,
+		.base = 0x50000, .len = 0x8,
+	}, {
+		.name = "merge_3d_3", .id = MERGE_3D_3,
+		.base = 0x65f00, .len = 0x8,
+	},
+};
+
+/*
+ * NOTE: Each display compression engine (DCE) contains dual hard
+ * slice DSC encoders so both share same base address but with
+ * its own different sub block address.
+ */
+static const struct dpu_dsc_cfg sa8775p_dsc[] = {
+	{
+		.name = "dce_0_0", .id = DSC_0,
+		.base = 0x80000, .len = 0x4,
+		.features = BIT(DPU_DSC_HW_REV_1_2),
+		.sblk = &dsc_sblk_0,
+	}, {
+		.name = "dce_0_1", .id = DSC_1,
+		.base = 0x80000, .len = 0x4,
+		.features = BIT(DPU_DSC_HW_REV_1_2),
+		.sblk = &dsc_sblk_1,
+	}, {
+		.name = "dce_1_0", .id = DSC_2,
+		.base = 0x81000, .len = 0x4,
+		.features = BIT(DPU_DSC_HW_REV_1_2) | BIT(DPU_DSC_NATIVE_42x_EN),
+		.sblk = &dsc_sblk_0,
+	}, {
+		.name = "dce_1_1", .id = DSC_3,
+		.base = 0x81000, .len = 0x4,
+		.features = BIT(DPU_DSC_HW_REV_1_2) | BIT(DPU_DSC_NATIVE_42x_EN),
+		.sblk = &dsc_sblk_1,
+	}, {
+		.name = "dce_2_0", .id = DSC_4,
+		.base = 0x82000, .len = 0x4,
+		.features = BIT(DPU_DSC_HW_REV_1_2),
+		.sblk = &dsc_sblk_0,
+	}, {
+		.name = "dce_2_1", .id = DSC_5,
+		.base = 0x82000, .len = 0x4,
+		.features = BIT(DPU_DSC_HW_REV_1_2),
+		.sblk = &dsc_sblk_1,
+	},
+};
+
+static const struct dpu_wb_cfg sa8775p_wb[] = {
+	{
+		.name = "wb_2", .id = WB_2,
+		.base = 0x65000, .len = 0x2c8,
+		.features = WB_SM8250_MASK,
+		.format_list = wb2_formats_rgb_yuv,
+		.num_formats = ARRAY_SIZE(wb2_formats_rgb_yuv),
+		.clk_ctrl = DPU_CLK_CTRL_WB2,
+		.xin_id = 6,
+		.vbif_idx = VBIF_RT,
+		.maxlinewidth = 4096,
+		.intr_wb_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 4),
+	},
+};
+
+/* TODO: INTF 3, 6, 7 and 8 are used for MST, marked as INTF_NONE for now */
+static const struct dpu_intf_cfg sa8775p_intf[] = {
+	{
+		.name = "intf_0", .id = INTF_0,
+		.base = 0x34000, .len = 0x280,
+		.features = INTF_SC7280_MASK,
+		.type = INTF_DP,
+		.controller_id = MSM_DP_CONTROLLER_0,
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 24),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 25),
+	}, {
+		.name = "intf_1", .id = INTF_1,
+		.base = 0x35000, .len = 0x300,
+		.features = INTF_SC7280_MASK,
+		.type = INTF_DSI,
+		.controller_id = MSM_DSI_CONTROLLER_0,
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 26),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 27),
+		.intr_tear_rd_ptr = DPU_IRQ_IDX(MDP_INTF1_TEAR_INTR, 2),
+	}, {
+		.name = "intf_2", .id = INTF_2,
+		.base = 0x36000, .len = 0x300,
+		.features = INTF_SC7280_MASK,
+		.type = INTF_DSI,
+		.controller_id = MSM_DSI_CONTROLLER_1,
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 28),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 29),
+		.intr_tear_rd_ptr = DPU_IRQ_IDX(MDP_INTF2_TEAR_INTR, 2),
+	}, {
+		.name = "intf_3", .id = INTF_3,
+		.base = 0x37000, .len = 0x280,
+		.features = INTF_SC7280_MASK,
+		.type = INTF_NONE,
+		.controller_id = MSM_DP_CONTROLLER_0,	/* pair with intf_0 for DP MST */
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 30),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 31),
+	}, {
+		.name = "intf_4", .id = INTF_4,
+		.base = 0x38000, .len = 0x280,
+		.features = INTF_SC7280_MASK,
+		.type = INTF_DP,
+		.controller_id = MSM_DP_CONTROLLER_1,
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 20),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 21),
+	}, {
+		.name = "intf_6", .id = INTF_6,
+		.base = 0x3A000, .len = 0x280,
+		.features = INTF_SC7280_MASK,
+		.type = INTF_NONE,
+		.controller_id = MSM_DP_CONTROLLER_0,	/* pair with intf_0 for DP MST */
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 17),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 16),
+	}, {
+		.name = "intf_7", .id = INTF_7,
+		.base = 0x3b000, .len = 0x280,
+		.features = INTF_SC7280_MASK,
+		.type = INTF_NONE,
+		.controller_id = MSM_DP_CONTROLLER_0,	/* pair with intf_0 for DP MST */
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 18),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 19),
+	}, {
+		.name = "intf_8", .id = INTF_8,
+		.base = 0x3c000, .len = 0x280,
+		.features = INTF_SC7280_MASK,
+		.type = INTF_NONE,
+		.controller_id = MSM_DP_CONTROLLER_1,	/* pair with intf_4 for DP MST */
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 12),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 13),
+	},
+};
+
+static const struct dpu_perf_cfg sa8775p_perf_data = {
+	.max_bw_low = 13600000,
+	.max_bw_high = 18200000,
+	.min_core_ib = 2500000,
+	.min_llcc_ib = 0,
+	.min_dram_ib = 800000,
+	.min_prefill_lines = 35,
+	/* FIXME: lut tables */
+	.danger_lut_tbl = {0x3ffff, 0x3ffff, 0x0},
+	.safe_lut_tbl = {0xfff0, 0xfff0, 0x1},
+	.qos_lut_tbl = {
+		{.nentry = ARRAY_SIZE(sm6350_qos_linear_macrotile),
+		.entries = sm6350_qos_linear_macrotile
+		},
+		{.nentry = ARRAY_SIZE(sm6350_qos_linear_macrotile),
+		.entries = sm6350_qos_linear_macrotile
+		},
+		{.nentry = ARRAY_SIZE(sc7180_qos_nrt),
+		.entries = sc7180_qos_nrt
+		},
+		/* TODO: macrotile-qseed is different from macrotile */
+	},
+	.cdp_cfg = {
+		{.rd_enable = 1, .wr_enable = 1},
+		{.rd_enable = 1, .wr_enable = 0}
+	},
+	.clk_inefficiency_factor = 105,
+	.bw_inefficiency_factor = 120,
+};
+
+static const struct dpu_mdss_version sa8775p_mdss_ver = {
+	.core_major_ver = 8,
+	.core_minor_ver = 4,
+};
+
+const struct dpu_mdss_cfg dpu_sa8775p_cfg = {
+	.mdss_ver = &sa8775p_mdss_ver,
+	.caps = &sa8775p_dpu_caps,
+	.mdp = &sa8775p_mdp,
+	.cdm = &sc7280_cdm,
+	.ctl_count = ARRAY_SIZE(sa8775p_ctl),
+	.ctl = sa8775p_ctl,
+	.sspp_count = ARRAY_SIZE(sa8775p_sspp),
+	.sspp = sa8775p_sspp,
+	.mixer_count = ARRAY_SIZE(sa8775p_lm),
+	.mixer = sa8775p_lm,
+	.dspp_count = ARRAY_SIZE(sa8775p_dspp),
+	.dspp = sa8775p_dspp,
+	.pingpong_count = ARRAY_SIZE(sa8775p_pp),
+	.pingpong = sa8775p_pp,
+	.dsc_count = ARRAY_SIZE(sa8775p_dsc),
+	.dsc = sa8775p_dsc,
+	.merge_3d_count = ARRAY_SIZE(sa8775p_merge_3d),
+	.merge_3d = sa8775p_merge_3d,
+	.wb_count = ARRAY_SIZE(sa8775p_wb),
+	.wb = sa8775p_wb,
+	.intf_count = ARRAY_SIZE(sa8775p_intf),
+	.intf = sa8775p_intf,
+	.vbif_count = ARRAY_SIZE(sdm845_vbif),
+	.vbif = sdm845_vbif,
+	.perf = &sa8775p_perf_data,
+};
+
+#endif
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index dcb4fd85e73b9cc05e669043602d69229881c0b4..cc67bc82128f17216478e1b15928a9c90edecbbb 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -699,6 +699,7 @@ static const struct dpu_qos_lut_entry sc7180_qos_nrt[] = {
 
 #include "catalog/dpu_8_0_sc8280xp.h"
 #include "catalog/dpu_8_1_sm8450.h"
+#include "catalog/dpu_8_4_sa8775p.h"
 
 #include "catalog/dpu_9_0_sm8550.h"
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index 37e18e820a20a4c4ab9a97da78df19a2ff7cfa00..9665eedec699e125cf72da20738a3031279bc522 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -850,6 +850,7 @@ extern const struct dpu_mdss_cfg dpu_sm8350_cfg;
 extern const struct dpu_mdss_cfg dpu_sc7280_cfg;
 extern const struct dpu_mdss_cfg dpu_sc8280xp_cfg;
 extern const struct dpu_mdss_cfg dpu_sm8450_cfg;
+extern const struct dpu_mdss_cfg dpu_sa8775p_cfg;
 extern const struct dpu_mdss_cfg dpu_sm8550_cfg;
 extern const struct dpu_mdss_cfg dpu_sm8650_cfg;
 extern const struct dpu_mdss_cfg dpu_x1e80100_cfg;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 9bcae53c4f458cd8e400f0e851b791c0f4165085..6d47d7dcffc2c1feafd99731571826a9b3f912b6 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1447,6 +1447,7 @@ static const struct dev_pm_ops dpu_pm_ops = {
 static const struct of_device_id dpu_dt_match[] = {
 	{ .compatible = "qcom,msm8998-dpu", .data = &dpu_msm8998_cfg, },
 	{ .compatible = "qcom,qcm2290-dpu", .data = &dpu_qcm2290_cfg, },
+	{ .compatible = "qcom,sa8775p-dpu", .data = &dpu_sa8775p_cfg, },
 	{ .compatible = "qcom,sdm630-mdp5", .data = &dpu_sdm630_cfg, },
 	{ .compatible = "qcom,sdm660-mdp5", .data = &dpu_sdm660_cfg, },
 	{ .compatible = "qcom,sdm670-dpu", .data = &dpu_sdm670_cfg, },

-- 
2.34.1

[PATCH v4 5/5] arm64: dts: qcom: sa8775p: add display dt nodes for MDSS0 and DPU

[Mahadevan]

Add devicetree changes to enable MDSS0 display-subsystem its
display-controller(DPU) for Qualcomm SA8775P platform.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Mahadevan <quic_mahap@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sa8775p.dtsi | 89 +++++++++++++++++++++++++++++++++++
 1 file changed, 89 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 8fd68a8aa916e6595134b470f87b18b509178a51..66bd5e1c82a426f93097dee63a69c03527f04b3e 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sa8775p-dispcc.h>
 #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
 #include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
 #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
@@ -2937,6 +2938,94 @@ camcc: clock-controller@ade0000 {
 			#power-domain-cells = <1>;
 		};
 
+		mdss0: display-subsystem@ae00000 {
+			compatible = "qcom,sa8775p-mdss";
+			reg = <0x0 0x0ae00000 0x0 0x1000>;
+			reg-names = "mdss";
+
+			/* same path used twice */
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mmss_noc MASTER_MDP1 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "mdp0-mem",
+					     "mdp1-mem",
+					     "cpu-cfg";
+
+			resets = <&dispcc0 MDSS_DISP_CC_MDSS_CORE_BCR>;
+
+			power-domains = <&dispcc0 MDSS_DISP_CC_MDSS_CORE_GDSC>;
+
+			clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>;
+
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			iommus = <&apps_smmu 0x1000 0x402>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss0_mdp: display-controller@ae01000 {
+				compatible = "qcom,sa8775p-dpu";
+				reg = <0x0 0x0ae01000 0x0 0x8f000>,
+				      <0x0 0x0aeb0000 0x0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdss0_mdp_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				interrupt-parent = <&mdss0>;
+				interrupts = <0>;
+
+				mdss0_mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-375000000 {
+						opp-hz = /bits/ 64 <375000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-500000000 {
+						opp-hz = /bits/ 64 <500000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+
+					opp-575000000 {
+						opp-hz = /bits/ 64 <575000000>;
+						required-opps = <&rpmhpd_opp_turbo>;
+					};
+
+					opp-650000000 {
+						opp-hz = /bits/ 64 <650000000>;
+						required-opps = <&rpmhpd_opp_turbo_l1>;
+					};
+				};
+			};
+		};
+
 		dispcc0: clock-controller@af00000 {
 			compatible = "qcom,sa8775p-dispcc0";
 			reg = <0x0 0x0af00000 0x0 0x20000>;

-- 
2.34.1

Re: [PATCH v4 0/5] Display enablement changes for Qualcomm SA8775P platform

[Dmitry Baryshkov]

On Wed, 9 Oct 2024 at 17:34, Mahadevan <quic_mahap@quicinc.com> wrote:
>
> This series introduces support to enable the Mobile Display Subsystem (MDSS)
> and Display Processing Unit (DPU) for the Qualcomm SA8775P target. It
> includes the addition of the hardware catalog, compatible string,
> relevant device tree changes, and their YAML bindings.
>
> ---
> In this series
> - PATCH 1: "dt-bindings: display/msm: Document MDSS on SA8775P" depends on dp
>   binding documetion in this change:
>   https://lore.kernel.org/all/20240923113150.24711-5-quic_mukhopad@quicinc.com/
> - PATCH 5: "arm64: dts: qcom: sa8775p: add display dt nodes for MDSS0 and DPU"
>   depends on the clock enablement change:
>   https://lore.kernel.org/all/20240816-sa8775p-mm-v3-v1-0-77d53c3c0cef@quicinc.com/
>
> ---
>
> [v4]
> - Removed new YAML added for sa8775p dpu dt-binding documention as it is similar
>   to qcom,sm8650-dpu.yaml and added the compatible in same. [Krzysztof]

And this wasn't tested. Please test the bindings before posting.

>
> [v3]
> -Edited copyright for catalog changes. [Dmitry]
> -Fix dt_binding_check tool errors(update reg address as address-cells and
>  size-cells of root node one and maintain the same for child nodes of mdss,
>  added additionalProperties in schema).
>  [Rob, Bjorn, Krzysztof]
> -Add QCOM_ICC_TAG_ACTIVE_ONLY interconnect path tag to mdp0-mem and mdp1-mem
>  path in devicetree. [Dmitry]
> -Update commit subject and message for DT change. [Dmitry]
> -Remove interconnect path tags from dt bindings. (ref sm8450-mdss yaml)
>
> [v2]
> - Updated cover letter subject and message. [Dmitry]
> - Use fake DISPCC nodes to avoid clock dependencies in dt-bindings. [Dmitry]
> - Update bindings by fixing dt_binding_check tool errors (update includes in example),
>   adding proper spacing and indentation in the binding example, droping unused labels,
>   droping status disable, adding reset node. [Dmitry, Rob, Krzysztof]
> - Reorder compatible string of MDSS and DPU based on alphabetical order.[Dmitry]
> - add reg_bus_bw in msm_mdss_data. [Dmitry]
> - Fix indentation in the devicetree. [Dmitry]
>
> --
> 2.34.1
>
> ---
> Mahadevan (5):
>       dt-bindings: display/msm: Document MDSS on SA8775P
>       dt-bindings: display/msm: Document the DPU for SA8775P
>       drm/msm: mdss: Add SA8775P support
>       drm/msm/dpu: Add SA8775P support
>       arm64: dts: qcom: sa8775p: add display dt nodes for MDSS0 and DPU
>
>  .../bindings/display/msm/qcom,sa8775p-mdss.yaml    | 241 ++++++++++
>  .../bindings/display/msm/qcom,sm8650-dpu.yaml      |   1 +
>  arch/arm64/boot/dts/qcom/sa8775p.dtsi              |  89 ++++
>  .../drm/msm/disp/dpu1/catalog/dpu_8_4_sa8775p.h    | 485 +++++++++++++++++++++
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     |   1 +
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |   1 +
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c            |   1 +
>  drivers/gpu/drm/msm/msm_mdss.c                     |  11 +
>  8 files changed, 830 insertions(+)
> ---
> base-commit: e390603cfa79c860ed35e073f5fe77805b067a8e
> change-id: 20240930-patchv3_1-600cbc1549e8
>
> Best regards,
> --
> Mahadevan <quic_mahap@quicinc.com>
>


-- 
With best wishes
Dmitry

[PATCH v4 0/5] Display enablement changes for Qualcomm SA8775P platform

[Mahadevan]

This series introduces support to enable the Mobile Display Subsystem (MDSS)
and Display Processing Unit (DPU) for the Qualcomm SA8775P target. It
includes the addition of the hardware catalog, compatible string,
relevant device tree changes, and their YAML bindings.

---
In this series
- PATCH 1: "dt-bindings: display/msm: Document MDSS on SA8775P" depends on dp
  binding documetion in this change:
  https://lore.kernel.org/all/20240923113150.24711-5-quic_mukhopad@quicinc.com/
- PATCH 5: "arm64: dts: qcom: sa8775p: add display dt nodes for MDSS0 and DPU"
  depends on the clock enablement change:
  https://lore.kernel.org/all/20240816-sa8775p-mm-v3-v1-0-77d53c3c0cef@quicinc.com/

---
[v5]
- Update clock-name of display-controller in MDSS documentation to align with
  qcom,sm8650-dpu.yaml. [Rob]
- Update power-domains of display-controller in DT to do proper voting on MMCX
  rail. [Internal Review]

[v4]
- Removed new YAML added for sa8775p dpu dt-binding documention as it is similar
  to qcom,sm8650-dpu.yaml and added the compatible in same. [Krzysztof]

[v3]
-Edited copyright for catalog changes. [Dmitry]
-Fix dt_binding_check tool errors(update reg address as address-cells and
 size-cells of root node one and maintain the same for child nodes of mdss,
 added additionalProperties in schema).
 [Rob, Bjorn, Krzysztof]
-Add QCOM_ICC_TAG_ACTIVE_ONLY interconnect path tag to mdp0-mem and mdp1-mem
 path in devicetree. [Dmitry]
-Update commit subject and message for DT change. [Dmitry]
-Remove interconnect path tags from dt bindings. (ref sm8450-mdss yaml)

[v2]
- Updated cover letter subject and message. [Dmitry]
- Use fake DISPCC nodes to avoid clock dependencies in dt-bindings. [Dmitry]
- Update bindings by fixing dt_binding_check tool errors (update includes in example),
  adding proper spacing and indentation in the binding example, droping unused labels,
  droping status disable, adding reset node. [Dmitry, Rob, Krzysztof]
- Reorder compatible string of MDSS and DPU based on alphabetical order.[Dmitry]
- add reg_bus_bw in msm_mdss_data. [Dmitry]
- Fix indentation in the devicetree. [Dmitry]

--
2.34.1

---
Mahadevan (5):
      dt-bindings: display/msm: Document MDSS on SA8775P
      dt-bindings: display/msm: Document the DPU for SA8775P
      drm/msm: mdss: Add SA8775P support
      drm/msm/dpu: Add SA8775P support
      arm64: dts: qcom: sa8775p: add display dt nodes for MDSS0 and DPU

 .../bindings/display/msm/qcom,sa8775p-mdss.yaml    | 241 ++++++++++
 .../bindings/display/msm/qcom,sm8650-dpu.yaml      |   1 +
 arch/arm64/boot/dts/qcom/sa8775p.dtsi              |  89 ++++
 .../drm/msm/disp/dpu1/catalog/dpu_8_4_sa8775p.h    | 485 +++++++++++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c            |   1 +
 drivers/gpu/drm/msm/msm_mdss.c                     |  11 +
 8 files changed, 830 insertions(+)
---
base-commit: e390603cfa79c860ed35e073f5fe77805b067a8e
change-id: 20240930-patchv3_1-600cbc1549e8

Best regards,
-- 
Mahadevan <quic_mahap@quicinc.com>

[PATCH v4 1/5] dt-bindings: display/msm: Document MDSS on SA8775P

[Mahadevan]

Document the MDSS hardware found on the Qualcomm SA8775P platform.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mahadevan <quic_mahap@quicinc.com>
---
 .../bindings/display/msm/qcom,sa8775p-mdss.yaml    | 241 +++++++++++++++++++++
 1 file changed, 241 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..58f8a01f29c7aaa9dc943c232363075686c06a7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
@@ -0,0 +1,241 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sa8775p-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SA87755P Display MDSS
+
+maintainers:
+  - Mahadevan <quic_mahap@quicinc.com>
+
+description:
+  SA8775P MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DP interfaces and EDP etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sa8775p-mdss
+
+  clocks:
+    items:
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    maxItems: 3
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sa8775p-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,sa8775p-dp
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interconnect/qcom,icc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+    #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sa8775p-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>,
+                        <&mmss_noc MASTER_MDP1 &mc_virt SLAVE_EBI1>,
+                        <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>;
+        interconnect-names = "mdp0-mem",
+                             "mdp1-mem",
+                             "cpu-cfg";
+
+
+        resets = <&dispcc_core_bcr>;
+        power-domains = <&dispcc_gdsc>;
+
+        clocks = <&dispcc_ahb_clk>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc_mdp_clk>;
+
+        interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x1000 0x402>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sa8775p-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc_ahb_clk>,
+                     <&dispcc_mdp_lut_clk>,
+                     <&dispcc_mdp_clk>,
+                     <&dispcc_mdp_vsync_clk>;
+            clock-names = "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc_mdp_vsync_clk>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdss0_mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            interrupt-parent = <&mdss0>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf0_out: endpoint {
+                         remote-endpoint = <&mdss0_dp0_in>;
+                    };
+                };
+            };
+
+            mdss0_mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-375000000 {
+                    opp-hz = /bits/ 64 <375000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-500000000 {
+                    opp-hz = /bits/ 64 <500000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+
+                opp-575000000 {
+                    opp-hz = /bits/ 64 <575000000>;
+                    required-opps = <&rpmhpd_opp_turbo>;
+                };
+
+                opp-650000000 {
+                    opp-hz = /bits/ 64 <650000000>;
+                    required-opps = <&rpmhpd_opp_turbo_l1>;
+                };
+            };
+        };
+
+        displayport-controller@af54000 {
+            compatible = "qcom,sa8775p-dp";
+
+            pinctrl-0 = <&dp_hot_plug_det>;
+            pinctrl-names = "default";
+
+            reg = <0xaf54000 0x104>,
+                  <0xaf54200 0x0c0>,
+                  <0xaf55000 0x770>,
+                  <0xaf56000 0x09c>;
+
+            interrupt-parent = <&mdss0>;
+            interrupts = <12>;
+
+            clocks = <&dispcc_mdss_ahb_clk>,
+                     <&dispcc_dptx0_aux_clk>,
+                     <&dispcc_dptx0_link_clk>,
+                     <&dispcc_dptx0_link_intf_clk>,
+                     <&dispcc_dptx0_pixel0_clk>;
+            clock-names = "core_iface",
+                          "core_aux",
+                          "ctrl_link",
+                          "ctrl_link_iface",
+                          "stream_pixel";
+
+            assigned-clocks = <&dispcc_mdss_dptx0_link_clk_src>,
+                              <&dispcc_mdss_dptx0_pixel0_clk_src>;
+            assigned-clock-parents = <&mdss0_edp_phy 0>, <&mdss0_edp_phy 1>;
+
+            phys = <&mdss0_edp_phy>;
+            phy-names = "dp";
+
+            operating-points-v2 = <&dp_opp_table>;
+            power-domains = <&rpmhpd SA8775P_MMCX>;
+
+            #sound-dai-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss0_dp0_in: endpoint {
+                        remote-endpoint = <&dpu_intf0_out>;
+                    };
+                };
+
+                port@1 {
+                   reg = <1>;
+                   mdss0_dp_out: endpoint { };
+                };
+            };
+
+            dp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-160000000 {
+                    opp-hz = /bits/ 64 <160000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-270000000 {
+                    opp-hz = /bits/ 64 <270000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-540000000 {
+                    opp-hz = /bits/ 64 <540000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-810000000 {
+                    opp-hz = /bits/ 64 <810000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+    };
+...

-- 
2.34.1