From: Rob Herring <robh+dt@kernel.org>
To: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Cc: Matti Vaittinen <mazziesaccount@gmail.com>,
Lee Jones <lee.jones@linaro.org>,
Mark Rutland <mark.rutland@arm.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
devicetree@vger.kernel.org,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [RESEND PATCH v2] dt-bindings: bd718x7: Yamlify and add BD71850
Date: Sat, 4 Apr 2020 11:30:35 -0600 [thread overview]
Message-ID: <CAL_JsqJ2VBDHSWViyvjEBckOqsMQVUdOGjABH0AT6LiaMnJx1Q@mail.gmail.com> (raw)
In-Reply-To: <CAL_JsqJjLGz6LPQmTP5eJTdti38yQa86UWiwCTae81Fr7eMHtA@mail.gmail.com>
On Sat, Apr 4, 2020 at 11:28 AM Rob Herring <robh+dt@kernel.org> wrote:
>
> On Fri, Mar 20, 2020 at 3:42 AM Matti Vaittinen
> <matti.vaittinen@fi.rohmeurope.com> wrote:
> >
> > Convert ROHM bd71837 and bd71847 PMIC binding text docs to yaml. Split
> > the binding document to two separate documents (own documents for BD71837
> > and BD71847) as they have different amount of regulators. This way we can
> > better enforce the node name check for regulators. ROHM is also providing
> > BD71850 - which is almost identical to BD71847 - main difference is some
> > initial regulator states. The BD71850 can be driven by same driver and it
> > has same buck/LDO setup as BD71847 - add it to BD71847 binding document and
> > introduce compatible for it.
> >
> > Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> > Reviewed-by: Rob Herring <robh@kernel.org>
>
> I did, but there's some dtc warnings that need to be fixed:
>
> Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.example.dts:23.17-30:
> Warning (reg_format): /example-0/i2c/pmic@4b:reg: property has invalid
> length (4 bytes) (#address-cells == 2, #size-cells == 1)
> Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.example.dt.yaml:
> Warning (pci_device_reg): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.example.dt.yaml:
> Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.example.dt.yaml:
> Warning (simple_bus_reg): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.example.dts:20.13-131.11:
> Warning (i2c_bus_bridge): /example-0/i2c: incorrect #address-cells for
> I2C bus
> Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.example.dts:20.13-131.11:
> Warning (i2c_bus_bridge): /example-0/i2c: incorrect #size-cells for
> I2C bus
> Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.example.dt.yaml:
> Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.example.dt.yaml:
> Warning (i2c_bus_reg): Failed prerequisite 'i2c_bus_bridge'
> Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.example.dt.yaml:
> Warning (spi_bus_reg): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.example.dts:21.25-130.15:
> Warning (avoid_default_addr_size): /example-0/i2c/pmic@4b: Relying on
> default #address-cells value
> Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.example.dts:21.25-130.15:
> Warning (avoid_default_addr_size): /example-0/i2c/pmic@4b: Relying on
> default #size-cells value
> Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.example.dt.yaml:
> Warning (unique_unit_address): Failed prerequisite
> 'avoid_default_addr_size'
And also:
Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.example.dts:23.17-30:
Warning (reg_format): /example-0/i2c/pmic@4b:reg: property has invalid
length (4 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.example.dt.yaml:
Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.example.dt.yaml:
Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.example.dt.yaml:
Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.example.dts:20.13-112.11:
Warning (i2c_bus_bridge): /example-0/i2c: incorrect #address-cells for
I2C bus
Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.example.dts:20.13-112.11:
Warning (i2c_bus_bridge): /example-0/i2c: incorrect #size-cells for
I2C bus
Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.example.dt.yaml:
Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.example.dt.yaml:
Warning (i2c_bus_reg): Failed prerequisite 'i2c_bus_bridge'
Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.example.dt.yaml:
Warning (spi_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.example.dts:21.25-111.15:
Warning (avoid_default_addr_size): /example-0/i2c/pmic@4b: Relying on
default #address-cells value
Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.example.dts:21.25-111.15:
Warning (avoid_default_addr_size): /example-0/i2c/pmic@4b: Relying on
default #size-cells value
Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.example.dt.yaml:
Warning (unique_unit_address): Failed prerequisite
'avoid_default_addr_size'
next prev parent reply other threads:[~2020-04-04 17:30 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-20 9:42 [RESEND PATCH v2] dt-bindings: bd718x7: Yamlify and add BD71850 Matti Vaittinen
2020-03-20 13:28 ` Lee Jones
2020-04-04 17:28 ` Rob Herring
2020-04-04 17:30 ` Rob Herring [this message]
2020-04-06 5:10 ` Vaittinen, Matti
-- strict thread matches above, loose matches on Subject: below --
2020-02-26 11:47 Matti Vaittinen
2020-02-27 16:45 ` Mark Brown
2020-01-15 6:29 Matti Vaittinen
2020-02-06 12:42 ` Vaittinen, Matti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAL_JsqJ2VBDHSWViyvjEBckOqsMQVUdOGjABH0AT6LiaMnJx1Q@mail.gmail.com \
--to=robh+dt@kernel.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=matti.vaittinen@fi.rohmeurope.com \
--cc=mazziesaccount@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).