devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rob Herring <robh+dt@kernel.org>
To: Amireddy Mallikarjuna reddy <mallikarjunax.reddy@linux.intel.com>
Cc: "open list:DMA GENERIC OFFLOAD ENGINE SUBSYSTEM" 
	<dmaengine@vger.kernel.org>, Vinod <vkoul@kernel.org>,
	devicetree@vger.kernel.org,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Andy Shevchenko <andriy.shevchenko@intel.com>,
	chuanhua.lei@linux.intel.com, "Kim,
	Cheol Yong" <cheol.yong.kim@intel.com>,
	"Wu, Qiming" <qi-ming.wu@intel.com>,
	malliamireddy009@gmail.com,
	Peter Ujfalusi <peter.ujfalusi@ti.com>
Subject: Re: [RESEND PATCH v10 1/2] dt-bindings: dma: Add bindings for Intel LGM SoC
Date: Thu, 14 Jan 2021 14:25:48 -0600	[thread overview]
Message-ID: <CAL_JsqJE59nA_Bvt1rL95WfeXjQkOSPiTZk8zAbdHSkujmS3gQ@mail.gmail.com> (raw)
In-Reply-To: <dee2d43dff26f7d5b6eaa0006659da254f1093d3.1608090736.git.mallikarjunax.reddy@linux.intel.com>

On Tue, Dec 15, 2020 at 10:08 PM Amireddy Mallikarjuna reddy
<mallikarjunax.reddy@linux.intel.com> wrote:
>
> Add DT bindings YAML schema for DMA controller driver
> of Lightning Mountain (LGM) SoC.
>
> Signed-off-by: Amireddy Mallikarjuna reddy <mallikarjunax.reddy@linux.intel.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> v1:
> - Initial version.
>
> v2:
> - Fix bot errors.
>
> v3:
> - No change.
>
> v4:
> - Address Thomas langer comments
>   - use node name pattern as dma-controller as in common binding.
>   - Remove "_" (underscore) in instance name.
>   - Remove "port-" and "chan-" in attribute name for both 'dma-ports' & 'dma-channels' child nodes.
>
> v5:
> - Moved some of the attributes in 'dma-ports' & 'dma-channels' child nodes to dma client/consumer side as cells in 'dmas' properties.
>
> v6:
> - Add additionalProperties: false
> - completely removed 'dma-ports' and 'dma-channels' child nodes.
> - Moved channel dt properties to client side dmas.
> - Use standard dma-channels and dma-channel-mask properties.
> - Documented reset-names
> - Add description for dma-cells
>
> v7:
> - modified compatible to oneof
> - Reduced number of dma-cells to 3
> - Fine tune the description of some properties.
>
> v7-resend:
> - rebase to 5.10-rc1
> - No change.
>
> v8:
> - rebased to 5.10-rc3
> - Fixing the bot issues (wrong indentation)
>
> v9:
> - Use 'enum' instead of oneOf+const
> - Drop '#dma-cells' in required:, already covered in dma-common.yaml
> - Drop nodename Already covered by dma-controller.yaml
>
> v10:
> - rebased to 5.10-rc6
> - Add Reviewed-by: Rob Herring <robh@kernel.org>
> - Fixed typo.
> - moved property dma-desc-in-sram to driver side.
> - Moved property dma-orrc to driver side.
>
> v10-resend:
> - rebased to 5.10
> - No change
> ---
>  .../devicetree/bindings/dma/intel,ldma.yaml   | 116 ++++++++++++++++++
>  1 file changed, 116 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/dma/intel,ldma.yaml
>
> diff --git a/Documentation/devicetree/bindings/dma/intel,ldma.yaml b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
> new file mode 100644
> index 000000000000..866d4c758a7a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
> @@ -0,0 +1,116 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/dma/intel,ldma.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Lightning Mountain centralized DMA controllers.
> +
> +maintainers:
> +  - chuanhua.lei@intel.com
> +  - mallikarjunax.reddy@intel.com
> +
> +allOf:
> +  - $ref: "dma-controller.yaml#"
> +
> +properties:
> +  compatible:
> +    enum:
> +      - intel,lgm-cdma
> +      - intel,lgm-dma2tx
> +      - intel,lgm-dma1rx
> +      - intel,lgm-dma1tx
> +      - intel,lgm-dma0tx
> +      - intel,lgm-dma3
> +      - intel,lgm-toe-dma30
> +      - intel,lgm-toe-dma31
> +
> +  reg:
> +    maxItems: 1
> +
> +  "#dma-cells":
> +    const: 3
> +    description:
> +      The first cell is the peripheral's DMA request line.
> +      The second cell is the peripheral's (port) number corresponding to the channel.
> +      The third cell is the burst length of the channel.
> +
> +  dma-channels:
> +    minimum: 1
> +    maximum: 16
> +
> +  dma-channel-mask:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +  reset-names:
> +    items:
> +      - const: ctrl
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  intel,dma-poll-cnt:
> +    $ref: /schemas/types.yaml#definitions/uint32

Since this was sent, there have been some fixes for JSON pointers and
this is missing a '/'. The tools now check:

/builds/robherring/linux-dt-bindings/Documentation/devicetree/bindings/dma/intel,ldma.yaml:
properties:intel,dma-poll-cnt: 'oneOf' conditional failed, one must be
fixed:
 'enum' is a required property
 'const' is a required property
 '/schemas/types.yaml#definitions/uint32' does not match
'types.yaml#/definitions/'

Please send a fix for this.

Thanks,
Rob

  reply	other threads:[~2021-01-14 20:26 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-16  4:08 [RESEND PATCH v10 0/2] Add Intel LGM SoC DMA support Amireddy Mallikarjuna reddy
2020-12-16  4:08 ` [RESEND PATCH v10 1/2] dt-bindings: dma: Add bindings for Intel LGM SoC Amireddy Mallikarjuna reddy
2021-01-14 20:25   ` Rob Herring [this message]
2021-01-15  8:14     ` Reddy, MallikarjunaX
2020-12-16  4:08 ` [RESEND PATCH v10 2/2] Add Intel LGM SoC DMA support Amireddy Mallikarjuna reddy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAL_JsqJE59nA_Bvt1rL95WfeXjQkOSPiTZk8zAbdHSkujmS3gQ@mail.gmail.com \
    --to=robh+dt@kernel.org \
    --cc=andriy.shevchenko@intel.com \
    --cc=cheol.yong.kim@intel.com \
    --cc=chuanhua.lei@linux.intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=malliamireddy009@gmail.com \
    --cc=mallikarjunax.reddy@linux.intel.com \
    --cc=peter.ujfalusi@ti.com \
    --cc=qi-ming.wu@intel.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).