From: Rob Herring <robh+dt@kernel.org>
To: Mars Cheng <mars.cheng@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>,
CC Hwang <cc.hwang@mediatek.com>,
Loda Chou <loda.chou@mediatek.com>,
Miles Chen <miles.chen@mediatek.com>,
Jades Shih <jades.shih@mediatek.com>,
Yingjoe Chen <yingjoe.chen@mediatek.com>,
My Chuang <my.chuang@mediatek.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
linux-mediatek@lists.infradead.org, devicetree@vger.kernel.org,
wsd_upstream@mediatek.com
Subject: Re: [PATCH 2/2] arm64: dts: mediatek: add mt6765 support
Date: Tue, 12 Jun 2018 18:58:28 -0600 [thread overview]
Message-ID: <CAL_JsqJX3VF0YPMqcYAG53ib1SO8eFfFsFP39XMHO5YiHLWq1Q@mail.gmail.com> (raw)
In-Reply-To: <1528843243-29782-3-git-send-email-mars.cheng@mediatek.com>
On Tue, Jun 12, 2018 at 4:40 PM, Mars Cheng <mars.cheng@mediatek.com> wrote:
> This adds basic chip support for MT6765 SoC.
>
> Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
> ---
> arch/arm64/boot/dts/mediatek/Makefile | 1 +
> arch/arm64/boot/dts/mediatek/mt6765-evb.dts | 39 +++++++
> arch/arm64/boot/dts/mediatek/mt6765.dtsi | 148 +++++++++++++++++++++++++++
> 3 files changed, 188 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt6765-evb.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt6765.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index ac17f60..7506b0d 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -1,6 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6765-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt6765-evb.dts b/arch/arm64/boot/dts/mediatek/mt6765-evb.dts
> new file mode 100644
> index 0000000..e5efbe5
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt6765-evb.dts
> @@ -0,0 +1,39 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018 MediaTek Inc.
> + * Author: Mars.C <mars.cheng@mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
With the SPDX tag, you can drop the license text.
> + */
> +
> +/dts-v1/;
> +#include "mt6765.dtsi"
> +
> +/ {
> + model = "MediaTek MT6765 EVB";
> + compatible = "mediatek,mt6765-evb", "mediatek,mt6765";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + memory@40000000 {
> + device_type = "memory";
> + reg = <0 0x40000000 0 0x1e800000>;
> + };
> +
> + chosen {
> + stdout-path = "serial0:921600n8";
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt6765.dtsi b/arch/arm64/boot/dts/mediatek/mt6765.dtsi
> new file mode 100644
> index 0000000..7222a5e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt6765.dtsi
> @@ -0,0 +1,148 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018 MediaTek Inc.
> + * Author: Mars.C <mars.cheng@mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
ditto
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + compatible = "mediatek,mt6765";
> + interrupt-parent = <&sysirq>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + psci {
> + compatible = "arm,psci-0.2";
> + method = "smc";
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + enable-method = "psci";
> + reg = <0x000>;
> + };
> +
> + cpu1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + enable-method = "psci";
> + reg = <0x001>;
> + };
> +
> + cpu2: cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + enable-method = "psci";
> + reg = <0x002>;
> + };
> +
> + cpu3: cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + enable-method = "psci";
> + reg = <0x003>;
> + };
> +
> + cpu4: cpu@100 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + enable-method = "psci";
> + reg = <0x100>;
> + };
> +
> + cpu5: cpu@101 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + enable-method = "psci";
> + reg = <0x101>;
> + };
> +
> + cpu6: cpu@102 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + enable-method = "psci";
> + reg = <0x102>;
> + };
> +
> + cpu7: cpu@103 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + enable-method = "psci";
> + reg = <0x103>;
> + };
> + };
> +
> + uart_clk: dummy26m {
> + compatible = "fixed-clock";
> + clock-frequency = <26000000>;
> + #clock-cells = <0>;
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 13
> + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14
> + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11
> + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10
> + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
> + };
> +
> + sysirq: intpol-controller@10200a80 {
This and others with an address should go under a simple-bus node.
Node name should be 'interrupt-controller@...'
> + compatible = "mediatek,mt6765-sysirq",
> + "mediatek,mt6577-sysirq";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupt-parent = <&gic>;
> + reg = <0 0x10200a80 0 0x50>;
> + };
> +
> + gic: interrupt-controller@0c000000 {
Drop the leading 0.
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <3>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + #redistributor-regions = <1>;
> + interrupt-parent = <&gic>;
> + interrupt-controller;
> + reg = <0 0x0c000000 0 0x40000>, // distributor
> + <0 0x0c100000 0 0x200000>; // redistributor
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + uart0: serial@11002000 {
> + compatible = "mediatek,mt6765-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11002000 0 0x400>;
> + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&uart_clk>;
> + status = "disabled";
> + };
> +
> + uart1: serial@11003000 {
> + compatible = "mediatek,mt6765-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11003000 0 0x400>;
> + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&uart_clk>;
> + status = "disabled";
> + };
> +};
> --
> 1.7.9.5
>
next prev parent reply other threads:[~2018-06-13 0:58 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-12 22:40 Add basic SoC support for MT6765 Mars Cheng
2018-06-12 22:40 ` [PATCH 1/2] ndings: mediatek: Add bindings for mediatek MT6765 Platform Mars Cheng
2018-06-13 0:51 ` Rob Herring
2018-06-13 1:59 ` Mars Cheng
2018-06-12 22:40 ` [PATCH 2/2] arm64: dts: mediatek: add mt6765 support Mars Cheng
2018-06-13 0:58 ` Rob Herring [this message]
2018-06-13 1:56 ` Mars Cheng
2018-06-15 8:54 ` Matthias Brugger
2018-06-20 0:18 ` Mars Cheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAL_JsqJX3VF0YPMqcYAG53ib1SO8eFfFsFP39XMHO5YiHLWq1Q@mail.gmail.com \
--to=robh+dt@kernel.org \
--cc=cc.hwang@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=jades.shih@mediatek.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=loda.chou@mediatek.com \
--cc=mars.cheng@mediatek.com \
--cc=matthias.bgg@gmail.com \
--cc=miles.chen@mediatek.com \
--cc=my.chuang@mediatek.com \
--cc=wsd_upstream@mediatek.com \
--cc=yingjoe.chen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).